This guide walks you through fixing the Windows error 0xc0000221, which appears as a blue screen with the message “The operating system couldn’t be loaded because a system file is missing or contains errors.” It usually happens during startup or after a failed update, and the fix involves repairing system files, checking disk health, and sometimes restoring the system. Before you begin, make sure you have a Windows installation USB or access to the Advanced Startup Options, as most steps require booting into recovery mode.
What You’ll Need
- A Windows installation USB or recovery drive (or access to the built-in recovery environment)
- Another working computer (optional, for creating a bootable USB)
- A backup of important files (if possible, before attempting repairs)
Step-by-Step
- Boot into Advanced Startup Options. If Windows fails to start, it should automatically show the recovery screen after a few attempts. If not, insert your Windows installation USB, restart your PC, and press the key to open the boot menu (often F12, F2, or Esc) to select the USB drive. Choose your language, then click “Repair your computer” in the bottom-left corner.
- Open Command Prompt. In the recovery environment, go to Troubleshoot > Advanced options > Command Prompt. This gives you access to repair tools.
- Run System File Checker (SFC). In the Command Prompt, type
sfc /scannowand press Enter. This scans and repairs corrupted system files. Wait for it to complete—this can take 10–20 minutes. If it finds errors but can’t fix them, note that you’ll need the next step. - Run DISM to repair system image. Type
dism /online /cleanup-image /restorehealthand press Enter. This repairs the Windows image that SFC relies on. It may require internet access to download files from Windows Update. If it fails, trydism /online /cleanup-image /restorehealth /source:C:\RepairSource\Windows /limitaccess(replace the path with your USB drive’s location if needed). - Check disk for errors. Type
chkdsk c: /rand press Enter. This scans the hard drive for bad sectors and file system errors. It may ask to schedule a check on restart—type Y and press Enter. If you’re in the recovery environment, it may run immediately. - Run Startup Repair. Go back to the Advanced options menu and select “Startup Repair.” This automatically fixes common boot issues. Let it run and restart your PC.
- If the error persists, use System Restore. In Advanced options, choose “System Restore” and pick a restore point from before the error appeared. This reverts system files and settings without affecting personal files.
- If nothing works, reset this PC. In Advanced options, select “Reset this PC” and choose “Keep my files” to reinstall Windows while preserving your data. This is a last resort but often resolves the error.
Common Mistakes
- Skipping DISM before SFC: Running SFC alone often fails if the system image is corrupt. Always run DISM first.
- Ignoring disk errors: The error can stem from a failing hard drive. If chkdsk reports bad sectors, back up your data immediately and consider replacing the drive.
- Not removing external drives: Sometimes USB drives or SD cards cause boot conflicts. Unplug all non-essential peripherals before troubleshooting.
- Using an outdated recovery USB: If your USB has an older Windows version, it might not match your system’s build. Use a USB created with the latest Media Creation Tool.
Tips
- Always create a system restore point before major updates or driver installations to make rollback easier.
- If you can still boot into Windows (the error appears after a restart), try running the same commands from an elevated Command Prompt (right-click > Run as administrator).
- Check your BIOS/UEFI settings for any recent changes—resetting to defaults can help if a setting is causing the error.
- Keep your Windows installation USB handy; it’s the only way to access recovery tools if Windows won’t start.
Troubleshooting
If the steps above don’t resolve the error, try these additional measures:
- Check for hardware issues: The error can be caused by faulty RAM. Use Windows Memory Diagnostic (type
mdsched.exein Run) or a third-party tool like Memtest86 to test your RAM. - Update BIOS/UEFI: Visit your motherboard manufacturer’s website and update to the latest BIOS version. This can fix compatibility issues that cause the error.
- Try a different SATA port or cable: If you’re using an HDD/SSD, a loose or damaged cable can cause read errors. Swap cables and ports to rule this out.
- Boot into Safe Mode: If you can reach the recovery screen, select “Safe Mode” from Startup Settings. If Windows boots, uninstall recently installed drivers or updates via Device Manager or Settings.
- Use the Windows Media Creation Tool to reinstall: If all else fails, create a fresh USB and perform a clean install. This wipes your drive, so back up data first.
Frequently Asked Questions
What causes error 0xc0000221?
It’s typically caused by corrupted system files, a failing hard drive, faulty RAM, or a recent update that didn’t install correctly. It can also occur after a power outage or improper shutdown.
Will I lose my files if I run these repairs?
Most steps (SFC, DISM, chkdsk, Startup Repair) do not delete personal files. System Restore also preserves your files. Only “Reset this PC” with “Remove everything” or a clean install will erase data.
Can I fix this without a Windows installation USB?
If Windows fails to start, you may still access Advanced Startup Options by pressing F11 or Shift+Restart from the login screen. If that doesn’t work, you’ll need a USB or recovery drive.
How long does the repair take?
SFC and DISM can take 15–30 minutes each, depending on your drive speed and system size. Chkdsk on a large drive may take over an hour. Be patient and don’t interrupt the process.
Why does the error come back after a restart?
If the underlying cause (like a failing drive or corrupt update) isn’t resolved, the error can reappear. Ensure you’ve run all repair tools and check hardware health.
Is there a way to prevent this error in the future?
Regularly update Windows, keep drivers current, shut down properly, and back up your data. Also, run sfc /scannow periodically to catch corruption early.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Disable Autocorrect on iPhone or iPad: Quick Guide
- Microsoft Store Error 0x80073d12: Fixes That Work
- View Notification Count on iPhone: Full Guide
- Custom Keyboard Shortcuts on Windows 11 & macOS
- Restore Windows 11 Display Scaling to Recommended
- Semiconductor Cycle: How Investors Track It0.0