sodcalculator

10 Tech How-To

Fix Printer Stuck on Spooling in Windows

Guide 10-51774 · Updated · Step by step

This guide walks you through clearing a printer stuck on “Spooling” in Windows, a common issue where print jobs hang in the queue and nothing comes out. You’ll restart the print spooler service, clear stuck jobs, and adjust settings to prevent it from happening again. No special tools are needed, just a few minutes and administrator access to your PC.

What You’ll Need

  • Windows administrator account (to restart services and delete files)
  • Access to the printer’s power cable (to power-cycle it if needed)
  • Patience — the fix usually takes under 10 minutes

Step-by-Step

  1. Cancel all print jobs (if possible). Open Settings > Bluetooth & devices > Printers & scanners. Click your printer, then Open print queue. If you see jobs, right-click each and select Cancel. If they don’t cancel, proceed to the next step.
  2. Stop the Print Spooler service. Press Win + R, type services.msc, and press Enter. Scroll to Print Spooler. Right-click it and select Stop. Leave this window open.
  3. Clear the spooler folder. Open File Explorer and navigate to C:\Windows\System32\spool\PRINTERS. Delete all files inside this folder. If prompted for administrator permission, click Continue. (This is the heart of the fix — stuck jobs live here.)
  4. Restart the Print Spooler service. Go back to the Services window, right-click Print Spooler, and select Start. Close Services.
  5. Power-cycle your printer. Turn off the printer, unplug it from power for 30 seconds, then plug it back in and turn it on. This clears any internal jam or communication error.
  6. Re-test printing. Print a test page from Settings > Bluetooth & devices > Printers & scanners — click your printer, then Print test page. If it prints, the issue is resolved.
  7. Prevent future spooling hangs. In the same printer settings, click your printer, then Printer properties > Advanced. Select Print directly to the printer instead of “Spool print documents.” This bypasses the spooler for that printer, reducing future hangs (though it may slow down large jobs).

Common Mistakes

  • Not stopping the spooler before deleting files. If the service is still running, it will recreate the stuck files and the problem persists.
  • Deleting the wrong folder. The correct path is ...\spool\PRINTERS, not the spool folder itself or drivers.
  • Skipping the printer power cycle. Sometimes the printer itself holds a corrupt job in memory; a reboot clears it.
  • Using “Restart” instead of “Stop” then “Start.” Restarting the service can still leave the stuck file in the queue if you don’t delete it first.

Tips

  • If you have multiple printers, check that the correct one is set as default — sending to the wrong printer often causes “spooling” confusion.
  • Update your printer driver from the manufacturer’s website. Outdated drivers are a leading cause of spooler freezes.
  • For network printers, ensure the IP address hasn’t changed. A stale IP can make the spooler wait indefinitely.
  • Disable “Enable bidirectional support” in printer properties > Ports > Configure Port, as this can sometimes cause hangs.

Troubleshooting

If the steps above don’t fix it, try these in order:

  • Run the Windows Printer Troubleshooter. Go to Settings > System > Troubleshoot > Other troubleshooters, run “Printer.” It will automatically detect and fix common issues.
  • Check for pending Windows updates. Go to Settings > Windows Update and install any pending updates, then restart and try again.
  • Reinstall the printer driver. In Printers & scanners, click your printer, select Remove, then Add device to re-add it. Windows will reinstall the driver.
  • Use a different connection. If your printer is on Wi-Fi, try a USB cable temporarily. If it works via USB, the issue is network-related (check router settings or printer’s Wi-Fi credentials).
  • Check the spooler service dependencies. In Services, double-click Print Spooler and ensure the startup type is Automatic. Also verify that RPC and HTTP services are running.
  • If all else fails, restart Windows in Safe Mode (hold Shift while clicking Restart, then choose Troubleshoot > Advanced options > Startup Settings). In Safe Mode, try printing — if it works, a third-party service is interfering.

Frequently Asked Questions

Why does my printer get stuck on “Spooling”?

Usually because a previous print job didn’t complete — due to a paper jam, cable disconnect, or a corrupted driver — and the spooler keeps trying to send it. The stuck file sits in the spool folder and blocks new jobs.

Will deleting files from the spool folder damage my printer?

No. Those files are just temporary print jobs. Deleting them only removes the queued documents; your printer and drivers remain intact.

What if I don’t have administrator access?

You’ll need an admin password to stop the service and delete files. If you don’t have it, contact your IT department or the account owner. Without admin rights, you can still try canceling jobs from the queue, but the spooler fix requires admin.

How do I set “Print directly to the printer” permanently?

Go to Printer properties > Advanced, select “Print directly to the printer,” and click OK. It stays for that printer until you change it back. Note that this disables spooling, so you can’t queue multiple jobs — each must finish before the next starts.

My printer is a network printer — does this fix still work?

Yes, the spooler folder and service are on your PC, not the printer. The same steps apply. If the issue persists, also check the printer’s IP address and ensure it’s reachable (ping it from Command Prompt).

Why does the spooler keep stopping by itself?

This is often caused by a corrupted driver or a conflict with another service. Try updating the driver, or check Event Viewer (Windows Logs > System) for errors related to “Spooler.” If it’s a recurring crash, consider reinstalling the driver or using a different port (e.g., IPP instead of WSD).

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →