If Windows 10 won’t reset — whether it fails mid-way, hangs at a black screen, or just gives an error — this guide walks you through the most reliable fixes. You’ll start with the built-in troubleshooting steps, then move to more advanced methods like using the Windows Recovery Environment or a bootable USB. No special tools are needed beyond what you likely already have.
What You’ll Need
- A Windows 10 PC that can power on (even if it doesn’t boot fully)
- Another working computer with internet access (for creating a USB drive, if needed)
- A USB flash drive with at least 8 GB of space (only if you need to create installation media)
- Your Windows product key (usually not required, but handy if a clean install is needed)
Step-by-Step
Method 1: Run the Reset from Settings (If Windows Boots)
- Click the Start button and select the Settings gear icon.
- Go to Update & Security → Recovery.
- Under “Reset this PC,” click Get started.
- Choose Keep my files or Remove everything (the latter is more thorough).
- If prompted, choose Cloud download or Local reinstall. Cloud download is more reliable if your system files are corrupted, but it requires a stable internet connection.
- Click Next, then Reset. Wait for the process to complete; it can take 30–60 minutes.
Method 2: Use Windows Recovery Environment (WinRE) When Windows Won’t Boot
- If your PC fails to boot, turn it on and off three times in a row — power on, wait for the spinning dots, then hold the power button to force shutdown. On the third restart, Windows should enter the Recovery Environment.
- Alternatively, insert a Windows 10 installation USB and boot from it. Choose your language, then click Repair your computer in the bottom-left corner.
- In the blue screen, select Troubleshoot → Reset this PC.
- Follow the same options as above (Keep my files or Remove everything). If the reset fails here, try Startup Repair first, then return to Reset.
Method 3: Use DISM and SFC to Fix Corrupted System Files
- Boot into the Recovery Environment as described above, or open Command Prompt from the Advanced options.
- Select Troubleshoot → Advanced options → Command Prompt.
- Type the following commands one by one, pressing Enter after each:
diskpart→list volume→ note the drive letter of your Windows installation (usually C:). Typeexitto leave diskpart.- Run:
DISM /Online /Cleanup-Image /RestoreHealth(if you’re in the recovery environment, useDISM /Image:C:\ /Cleanup-Image /RestoreHealth). - Then run:
sfc /scannow(orsfc /scannow /offbootdir=C:\ /offwindir=C:\Windowsfrom recovery). - Restart your PC and try the reset again.
Method 4: Perform a Clean Install Using a Bootable USB
- On another computer, download the Windows 10 Media Creation Tool from Microsoft’s official website.
- Run the tool, accept the license, and choose Create installation media for another PC.
- Select your language, edition, and architecture (64-bit recommended).
- Choose USB flash drive and select your USB drive (it will be erased).
- Once the USB is ready, insert it into the problematic PC and boot from it (you may need to press a key like F12, Esc, or Del during startup to choose the boot device).
- On the setup screen, click Install now, then accept the license.
- When asked for the installation type, select Custom: Install Windows only (advanced).
- Select the partition where Windows is installed (usually Drive 0 Partition 1) and click Format, then Next. This will wipe your files, so back up anything important beforehand.
- Follow the prompts to complete the installation. This is the most thorough fix and bypasses reset entirely.
Common Mistakes
- Not backing up files before choosing “Remove everything” – you’ll lose all personal data.
- Interrupting the reset by turning off the PC or unplugging it mid-process, which can corrupt the system further.
- Using the wrong USB boot key – check your motherboard manual for the correct key (often F12, F2, or Del).
- Ignoring disk errors – if your hard drive has bad sectors, reset may fail repeatedly. Run
chkdsk /f /rfrom Command Prompt first. - Skipping the “Cloud download” option – if local files are corrupt, a local reinstall may fail again.
Tips
- Before resetting, try System Restore (if available) to go back to a working state.
- Disconnect all external devices (printers, USB drives, second monitors) during the reset to avoid driver conflicts.
- Ensure your PC is plugged into a power source – a sudden shutdown during reset can cause more damage.
- If you have a laptop, remove the battery if it’s removable, but keep it plugged in via AC.
- Write down your Windows product key (or link your Microsoft account) before a clean install.
Troubleshooting
If the reset still fails after trying the above:
- Error “There was a problem resetting your PC” – This is often due to corrupted system files. Run DISM and SFC again, then try reset with “Cloud download”.
- Reset gets stuck at a percentage – Wait at least 2 hours; if it’s truly stuck, force shutdown and boot into WinRE. Try the clean install method.
- Black screen after reset – Boot into WinRE and use Startup Repair. If that fails, perform a clean install.
- “Choose an option” loop – This indicates a boot failure. Use the installation USB to run Startup Repair or open Command Prompt and run
bootrec /fixmbr,bootrec /fixboot, andbootrec /rebuildbcd. - No recovery environment available – If you can’t access WinRE, create a bootable USB on another PC and boot from it to access the repair tools.
- Hardware issue suspected – If reset fails consistently, test your RAM (Windows Memory Diagnostic) and check the hard drive health with
chkdskor third-party tools.
Frequently Asked Questions
Will resetting remove viruses?
Yes, a full reset (Remove everything) will remove most viruses and malware, as it reinstalls Windows and deletes all files. However, some sophisticated rootkits can survive; a clean install from USB is more secure.
Do I need a product key to reset Windows 10?
No. Resetting doesn’t require a key because your PC’s license is embedded in the firmware or tied to your Microsoft account. For a clean install, Windows will automatically activate if the same edition was previously activated.
How long does a Windows 10 reset take?
Typically 30–60 minutes, but it can take longer on older hardware or if you choose “Cloud download.” If it exceeds 2 hours, it may be stuck.
Can I cancel a reset once it starts?
It’s not recommended. Interrupting can corrupt system files. If you must stop, force shutdown and then run Startup Repair, but you risk losing data.
What’s the difference between “Keep my files” and “Remove everything”?
“Keep my files” reinstalls Windows but preserves your personal files and apps (though some apps may be removed). “Remove everything” wipes all files, settings, and apps, giving a completely fresh start.
Why does my reset fail with error 0x80070005?
This is usually a permissions issue. Ensure you’re signed in as an administrator, disable third-party antivirus temporarily, and run the reset from WinRE instead of Settings.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Recover Deleted Admin Account in Windows 11
- Install Custom Recovery on Samsung Galaxy E5
- Fix Administrator Blocked You From Running This App Error
- Fix Google Calendar Not Syncing on iPhone