sodcalculator

10 Tech How-To

Fix AirPods Pro Red Exclamation Point Errors

Guide 10-49819 · Updated · Step by step

If your AirPods Pro show a red exclamation point in the Bluetooth settings or the case’s status light flashes red, it means the firmware update failed, the connection is corrupted, or the hardware isn’t being detected correctly. This guide walks you through the exact steps to clear the error and get your AirPods working again, starting with the simplest fixes and moving to more involved resets.

What You’ll Need

  • Your AirPods Pro and their charging case
  • The iPhone, iPad, or Mac they are paired with
  • A Lightning cable (or MagSafe charger for the case)
  • A soft, dry, lint-free cloth
  • A stable Wi-Fi connection (for firmware updates)

Step-by-Step

  1. Check the basics first. Make sure both AirPods are seated fully in the case. Open the lid and look at the status light. If it flashes amber or red, the case battery may be critically low. Plug the case into power using the Lightning cable and let it charge for at least 15 minutes before proceeding.
  2. Clean the charging contacts. A red exclamation point often appears when the metal contacts on the AirPods stems or inside the case are dirty or blocked. Use a dry, lint-free cloth to gently wipe the stems of both AirPods and the charging contacts inside the case. Do not use water or any liquid cleaners. Make sure there is no debris or earwax blocking the mesh or the charging points.
  3. Reconnect your AirPods Pro. On your iPhone, go to Settings > Bluetooth. Tap the blue “i” icon next to your AirPods Pro, then tap Forget This Device. Confirm the choice. Place both AirPods back in the case, close the lid, and wait 30 seconds. Open the lid, then press and hold the setup button on the back of the case until the status light flashes white. Re-pair them by holding the case near your iPhone and following the on-screen prompts.
  4. Force reset the AirPods Pro. If forgetting and re-pairing didn’t work, do a full factory reset. Put both AirPods in the case and close the lid. Wait 30 seconds. Open the lid, then press and hold the setup button on the back of the case for about 15 seconds. The status light will flash amber, then white. Release the button when you see the white flashing. This clears all settings and pairing data. Re-pair them as if they were new.
  5. Update the firmware manually. A red exclamation point can appear when a firmware update fails midway. To force a re-attempt, place both AirPods in the case, close the lid, and plug the case into a power source. Keep the case near your iPhone, which must be connected to Wi-Fi. Leave them alone for at least 30 minutes. The firmware update will retry automatically. Check the firmware version later under Settings > Bluetooth > (i) next to your AirPods. The latest version should be listed there.
  6. Check the case’s status light behavior. After a successful reset, the light should show green when the case is charged and the AirPods are inside. If it still flashes red, the issue is likely hardware-related. Look for any physical damage, bent pins, or corrosion in the charging port.
  7. Try a different charging method. If you were using a wireless charger, switch to a Lightning cable. Conversely, if you were using a cable, try a MagSafe or Qi charger. Sometimes a faulty charging accessory causes the case to report an error. Use the original Apple cable or a certified third-party one.
  8. Test each AirPod individually. Remove one AirPod from the case and try playing audio with just that one. Then swap and test the other. If only one side shows the error, the problem is isolated to that specific AirPod. Clean that stem again and reinsert it firmly. Try resetting again with only the problematic AirPod in the case.
  9. Check for physical obstructions. Inspect the inside of the case’s charging wells. A piece of lint, pocket fuzz, or a bent contact can prevent a proper connection. Use a dry cotton swab or a wooden toothpick to gently dislodge any visible debris. Be extremely careful not to scratch the contacts.
  10. Contact Apple Support. If none of the above steps clear the red exclamation point, the AirPods Pro likely have a hardware fault. This could be a dead battery, a damaged charging circuit, or a failed firmware chip. Book an appointment at an Apple Store or an authorized service provider. They can run diagnostics and, if your AirPods are under warranty or covered by Apple’s AirPods Pro service program, repair or replace them.

Common Mistakes

  • Skipping the charging step. Trying to reset with a completely dead case battery will fail. Always charge for at least 15 minutes first.
  • Using liquids to clean. Moisture can short-circuit the contacts and make the error worse. Only use a dry cloth.
  • Not holding the reset button long enough. The button must be held for the full 15 seconds until you see the amber light flash, then white. Releasing early just puts the case into pairing mode without clearing the error.
  • Forgetting the device before resetting. If you don’t remove the AirPods from your iPhone’s Bluetooth list, the old corrupted pairing data can be restored automatically, bringing the error back.
  • Assuming the red light always means failure. A solid amber light is normal when the case is charging. A flashing amber light means the case battery is low. Only a flashing red or a persistent red exclamation point in the settings app is a true error indicator.

Tips

  • Keep firmware updated. Apple regularly releases firmware updates that fix connectivity bugs. Leave your AirPods in the case, plugged in, near your iPhone on Wi-Fi overnight to ensure updates install.
  • Use a dedicated charging brick. Charging from a laptop’s USB port or a low-power adapter can be slow and sometimes unreliable. Use a 20W or higher USB-C power adapter for the fastest, most stable charge.
  • Store them properly. When not in use, always keep the AirPods in the case with the lid closed. This prevents dust and lint from entering the charging wells.
  • Check the warranty status. AirPods Pro have a one-year limited warranty. If you’re within that period, a hardware failure will likely be covered at no cost.
  • Reset your iPhone’s network settings as a last resort. If the AirPods pair but still show an error, a corrupted Bluetooth stack on your phone might be the cause. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This will not delete your data, but it will forget all Wi-Fi passwords and Bluetooth devices, so you’ll need to re-pair everything.

Troubleshooting

If the red exclamation point persists after a full reset: The issue is almost certainly hardware. Check if the case itself charges (plug it in and see if the light turns green after an hour). If the case charges but the AirPods don’t, the AirPods’ batteries or charging contacts are faulty. If the case doesn’t charge at all, the case’s Lightning port or internal battery is the problem.

If only one AirPod shows the error: Try swapping the AirPods between the left and right slots in the case. If the error follows the AirPod, that specific unit is faulty. If the error stays in the same slot, the case’s charging contact for that slot is damaged.

If the AirPods connect but have no sound: This is separate from the red exclamation point. Check the volume level, make sure audio is routed to the AirPods (Control Center > audio output), and clean the speaker mesh. If sound is still absent, a hardware repair is needed.

If the case shows a green light but the iPhone still shows the error: Force quit the Settings app (swipe up from the bottom and pause, then swipe the Settings app away). Reopen Settings and check again. If it persists, restart your iPhone completely, then check again.

If the firmware update never completes: Ensure your iPhone has a strong Wi-Fi connection and is not in Low Power Mode. Low Power Mode can delay background updates. Plug the case into power and leave it undisturbed for at least an hour. If it still fails, try connecting the case to a different power source.

Frequently Asked Questions

Q: What does the red exclamation point on AirPods Pro mean?
A: It indicates a connection or hardware problem. It usually means the AirPods failed to update firmware, the charging contacts are dirty, or there is a hardware fault in the AirPod or the case.

Q: Will resetting my AirPods delete anything important?
A: No. It only clears pairing information and custom settings like noise control preferences and ear tip fit test data. You will need to re-pair them to your devices after the reset.

Q: How long should I hold the reset button?
A: Press and hold for about 15 seconds. You’ll see the status light flash amber, then white. Release the button when you see the white flashing light. Holding it longer won’t cause damage but is unnecessary.

Q: Can I fix the red exclamation point by updating iOS?
A: Sometimes. If the error is caused by a software bug in the Bluetooth stack, updating your iPhone to the latest iOS version can resolve it. It’s worth checking for updates before assuming hardware failure.

Q: Is the red exclamation point covered under Apple’s warranty?
A: If it’s a hardware defect and your AirPods are within the one-year limited warranty, yes. Apple also has a service program for AirPods Pro that covers certain sound issues, but the red exclamation point itself is not part of that specific program. Contact Apple Support to check your eligibility.

Q: Why does the red exclamation point keep coming back after I fix it?
A: This usually indicates an intermittent hardware issue, such as a loose charging contact or a failing battery. If the error recurs frequently, even after cleaning and resetting, the component needs professional repair or replacement.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →