If you have been experimenting with AT commands on your Samsung Galaxy and now the network or calling is broken, this guide walks you through restoring normal operation. It covers resetting the modem, restoring the APN, and clearing the phone’s network cache, so you can get back to making calls and using mobile data.
What You’ll Need
- Your Samsung Galaxy phone (any model running Android 10 or later)
- The device’s SIM card (and the SIM ejector tool if you need to remove it)
- Access to your carrier’s APN settings (usually found on their website or support page)
- Optional: a computer with Samsung Smart Switch or ADB if the phone is unresponsive
Step-by-Step
- Restart your phone. Press and hold the side button, then tap “Restart.” This clears temporary glitches and reloads the modem firmware, which often resolves minor issues caused by AT command changes.
- Turn Airplane Mode on and off. Swipe down from the top of the screen to open Quick Settings, tap the Airplane Mode icon to enable it, wait 10 seconds, then tap again to disable it. This forces the phone to re-register with the network.
- Check the network mode. Go to Settings > Connections > Mobile networks > Network mode. Ensure it is set to “Global” or “LTE/3G/2G (auto connect)” – not a locked band or a specific mode that might have been changed via AT commands.
- Reset the APN settings. Go to Settings > Connections > Mobile networks > Access Point Names. Tap the three-dot menu (top right) and select “Reset to default.” If that does not work, manually enter your carrier’s APN settings. You can find these on your carrier’s website or by contacting support.
- Clear the network cache. Go to Settings > Apps, tap the three-dot menu, and select “Show system apps.” Find “Network” or “Connectivity” (the exact name varies), tap “Storage,” then “Clear cache.” Do not clear data unless you are sure, as it may sign you out of Wi-Fi networks.
- Re-insert the SIM card. Power off the phone, use the SIM ejector tool to remove the SIM tray, take out the SIM card, inspect it for damage, and reinsert it firmly. Power the phone back on.
- Update the phone’s software. Go to Settings > Software update > Download and install. If an update is available, install it. Updates often fix modem bugs and restore proper network behavior.
- Factory reset (last resort). Back up your data first. Go to Settings > General management > Reset > Factory data reset. This will erase all settings, including any AT command changes, and restore the phone to its original state.
Common Mistakes
- Changing AT commands without knowing the exact syntax – a single wrong character can corrupt the modem’s configuration.
- Not resetting the APN after changing it – many network issues are actually APN-related.
- Assuming the issue is hardware when it is a software setting – always try the software resets first.
- Skipping the reboot after each change – some settings only take effect after a restart.
Tips
- Write down your original AT command settings before you change anything, so you can revert them manually if needed.
- Use the Samsung Members app to run a diagnostic test on your network – it can identify if the problem is with the phone or the network.
- If you are using a third-party app to send AT commands, uninstall it after you are done – it may reset the modem every time it runs.
- Keep your carrier’s customer service number handy – they can verify if your line is active and if there are any outages in your area.
Troubleshooting
- If calls still fail after step 4: Try manually adding a new APN. Tap the “+” icon, enter your carrier’s APN settings, save it, and select it as the active APN.
- If the phone shows “No service” after step 6: Try a different SIM card (from another phone) to see if the issue is with your SIM or the phone. If the other SIM works, contact your carrier for a replacement SIM.
- If the phone is stuck in a boot loop after AT commands: Connect to a computer and use Smart Switch to do an emergency recovery. This will reinstall the firmware.
- If the network mode is greyed out: This can happen if the phone is in “Safe mode” or if a restrictive AT command is active. Restart the phone normally and try again.
- If you cannot access Settings at all: Perform a hard reset by holding Volume Up + Power (for most models) until the recovery menu appears, then select “Wipe data/factory reset.” This will erase everything, so only do this if you have no other option.
Frequently Asked Questions
Can AT commands permanently damage my Samsung phone?
No, AT commands are software-level changes. They can make the phone unusable until corrected, but a factory reset or firmware reinstall will always restore it.
What AT command should I use to restore the default network settings?
There is no single universal command. The safest approach is to use the phone’s built-in reset options (as described in the steps) rather than trying to guess the correct AT command.
Why did my network stop working after I sent an AT command?
AT commands can change the modem’s band selection, network mode, or APN settings. If you set a band that is not supported by your carrier, the phone cannot connect.
Will clearing the network cache delete my contacts or photos?
No, clearing the network cache only removes temporary files related to network connections. Your personal data is safe.
Do I need to contact my carrier if the problem persists?
Yes, if you have tried all the steps and the issue remains, it could be a network outage or a problem with your SIM card. Contact your carrier to check.
Can I use AT commands to improve my signal?
AT commands cannot boost signal strength. They only change how the phone communicates with the network. Improving signal usually requires moving to a better location or using a signal booster.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step
- Stop Outlook From Changing Hyperlink Font
- Hiberfil.sys: What It Is & How to Delete It
- How to Make a Mask on Snapchat: Step-by-Step