If your LG G6 is dropping calls, showing fewer bars than usual, or struggling with mobile data, this guide walks you through the most effective fixes, from quick software toggles to deeper network settings resets. No special tools are required, and most steps take under five minutes.
What You’ll Need
- Your LG G6 with the battery charged (above 20%)
- Your SIM card ejector tool (or a small paperclip)
- Access to your Wi-Fi network (for some steps)
- A safe place to set the phone down (for a temporary reset)
Step-by-Step
1. Toggle Airplane Mode
This is the fastest way to force your phone to re-register with the nearest cell tower. Swipe down from the top of the screen with two fingers to open the quick settings panel, then tap the Airplane Mode icon to turn it on. Wait about 10 seconds, then tap it again to turn it off. Your phone will search for a network and reconnect.
2. Restart Your Phone
A simple restart clears temporary software glitches that can interfere with the radio. Press and hold the Power button, then tap Restart. If your phone is unresponsive, press and hold the Power button for about 10 seconds until it powers off, then turn it back on.
3. Check Your Network Mode
Your LG G6 might be set to a network mode that doesn’t match your carrier’s strongest signal. Go to Settings > Network & internet (or Connections) > Mobile networks > Network mode. Choose Global (or LTE/3G/2G if available) to allow the phone to pick the best available network. If you’re in a rural area, switching to 3G only might give you a more stable connection.
4. Reinsert the SIM Card
A loose or slightly misaligned SIM card is a common cause of signal drops. Power off the phone. Insert the SIM ejector tool into the small hole on the SIM tray (located on the top edge of the phone). Gently push until the tray pops out. Remove the SIM card, check for any visible damage or dust, and wipe it with a soft, dry cloth. Reinsert the SIM card firmly into the tray, then push the tray back into the phone. Power on the phone.
5. Reset Network Settings
This clears saved Wi-Fi networks, Bluetooth pairings, and cellular settings that might be corrupted. Go to Settings > System > Reset > Network settings reset. Confirm the action. Your phone will restart. Afterward, you’ll need to re-enter your Wi-Fi passwords and re-pair Bluetooth devices.
6. Update Your Carrier Settings
Carriers occasionally push updates that improve network compatibility. Go to Settings > Network & internet > Mobile networks > Carrier settings (or Access Point Names). If an update is available, you’ll see a prompt to install it. If not, you can manually check by tapping the menu (three dots) and selecting Update if present.
7. Check for Software Updates
System updates often include radio firmware improvements. Go to Settings > System > Update center > Software update > Check for updates. If an update is available, download and install it while connected to Wi-Fi.
8. Try Safe Mode
Third-party apps can sometimes interfere with the radio. To test, press and hold the Power button, then tap and hold Power off until you see a prompt to reboot into Safe Mode. Confirm. In Safe Mode, third-party apps are disabled. If your signal is strong in Safe Mode, a downloaded app is the culprit. Restart normally and uninstall recently installed apps, especially battery savers, VPNs, or network boosters.
9. Contact Your Carrier
If none of the above works, the issue may be on your carrier’s side. Call them and ask if there is a known outage in your area, or if your SIM card needs to be reactivated or replaced. They can also check if your account has any restrictions that might affect signal.
Common Mistakes
- Using a metal case or a thick battery case: Metal can block radio waves. Remove the case temporarily to see if it helps.
- Ignoring the network mode: Setting your phone to a specific network mode (like LTE only) in an area with poor LTE coverage can cause constant disconnects.
- Skipping the SIM reinsertion: A SIM that looks fine can still make poor contact. Always reseat it.
- Resetting without backing up Wi-Fi passwords: A network settings reset will erase them. Note them down first.
Tips
- Update your profile and PRL (if on a CDMA carrier): Go to Settings > Network & internet > Mobile networks > Update profile (or Update PRL). This refreshes your connection to the carrier’s network.
- Use Wi-Fi calling: If you have poor cellular coverage at home or work, enable Wi-Fi calling. Go to Settings > Network & internet > Mobile networks > Wi-Fi calling and turn it on.
- Keep your phone’s software up to date: Regular updates often include radio improvements.
- Restart your phone weekly: This clears memory leaks that can degrade performance over time.
Troubleshooting
- Signal still weak after all steps: Try a different SIM card from your carrier (ask for a replacement). If the new SIM works, your old one is faulty.
- No signal at all after a network reset: Double-check that you’ve selected the correct network mode and that Airplane Mode is off. If the problem persists, perform a factory reset (back up your data first).
- Signal drops only in certain locations: This is likely a coverage issue, not a phone issue. Check your carrier’s coverage map or use a signal app to confirm.
- Phone heats up during calls: Heat can affect the radio. Remove the case and avoid using the phone while charging.
- SIM tray won’t eject: Do not force it. Try a different ejector tool or a thin paperclip. If it still won’t budge, visit a repair shop.
Frequently Asked Questions
Why does my LG G6 show full bars but still drop calls?
Full bars indicate a strong signal to the tower, but call quality also depends on network congestion and the backhaul connection. Try toggling Airplane Mode to force a re-registration, and if the problem persists, contact your carrier about a possible network issue.
Will a factory reset fix signal problems?
It can, if the issue is caused by a software glitch or a corrupted system file. However, it’s a last resort—try all other steps first, and back up your data before resetting.
Can a damaged SIM card cause weak signal?
Yes. A scratched or bent SIM card can lose contact with the phone’s reader, leading to intermittent signal loss. Inspect the card and replace it if you see damage.
Why does my signal improve when I remove the case?
Some cases, especially those with metal or thick materials, can block or weaken radio signals. If you notice an improvement, consider a case made of plastic or silicone.
Does the LG G6 support 5G?
No, the LG G6 was released in 2017 and only supports up to 4G LTE. If you’re on a 5G plan, the phone will simply use the 4G network.
How do I know if it’s a hardware problem?
If you’ve tried all the software fixes and the signal is still bad in multiple locations, and a different SIM card doesn’t help, the phone’s antenna or radio hardware may be damaged. In that case, contact LG support or a professional repair service.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Google Photos Backup Stuck? Fixes That Work
- Record Your Own Alarm Sound on Android
- Transfer Music from ZTE to iPhone: Full Guide
- Angel Investor vs Venture Capitalist: Key Differences
- Sync Apps Between Android Devices Using Google Play
- Find What Drains Your iPhone Battery Fast