sodcalculator

10 Tech How-To

Fix Stop 0xAC HAL Memory Allocation in Windows

Guide 10-45496 · Updated · Step by step

Stop 0xAC (HAL_MEMORY_ALLOCATION) is a Blue Screen of Death that appears when the Hardware Abstraction Layer (HAL) cannot allocate a memory block it needs, often due to faulty RAM, driver conflicts, or BIOS/UEFI settings. This guide walks you through the most effective fixes, from simple restarts to hardware diagnostics, so you can get your system stable again.

What You’ll Need

  • Administrator access to Windows
  • A Windows installation USB or recovery drive (for advanced steps)
  • Access to your motherboard’s BIOS/UEFI (usually by pressing Del, F2, or F12 during boot)
  • Optional: a known-good spare RAM module for testing

Step-by-Step

  1. Restart your PC. A temporary memory allocation glitch can sometimes clear with a simple reboot. If the error only appears once and doesn’t return, you may not need further action.
  2. Run Windows Memory Diagnostic. Press Win + R, type mdsched.exe, and press Enter. Choose “Restart now and check for problems.” Windows will run a memory test and reboot. If errors are found, your RAM is likely faulty.
  3. Check for driver issues. Open Device Manager (Win + X → Device Manager). Look for devices with a yellow exclamation mark. Right-click any problematic device and select “Update driver” → “Search automatically for drivers.” Pay special attention to chipset, storage, and network drivers.
  4. Run System File Checker (SFC). Open Command Prompt as Administrator (Win + X → Command Prompt (Admin)). Type sfc /scannow and press Enter. Let it complete; it will repair corrupted system files if found.
  5. Check for disk errors. In the same Command Prompt, type chkdsk /f /r and press Enter. You’ll be prompted to schedule it for the next restart – type Y and restart. This scans for bad sectors and file system corruption.
  6. Update BIOS/UEFI. Visit your motherboard manufacturer’s website, find your exact model, and download the latest BIOS update. Follow their instructions carefully – a failed BIOS update can brick your system.
  7. Disable memory-related BIOS features. Enter BIOS/UEFI (usually Del, F2, or F12 during boot). Look for settings like “Memory Remapping,” “XMP,” “EXPO,” or “Memory Fast Boot.” Disable them temporarily and save changes. Restart and see if the error persists.
  8. Test with a single RAM stick. If you have multiple RAM modules, remove all but one. Boot and stress-test the system. Repeat with each module individually. This isolates a faulty stick.
  9. Perform a Clean Boot. Press Win + R, type msconfig, and go to the “Services” tab. Check “Hide all Microsoft services,” then click “Disable all.” Go to the “Startup” tab and click “Open Task Manager.” Disable all startup items. Restart. If the error disappears, a third-party service or startup program is the culprit. Re-enable them one by one to find the offender.
  10. Reset Windows (last resort). If nothing works, consider resetting Windows. Go to Settings → Update & Security → Recovery → “Reset this PC.” Choose “Keep my files” to preserve personal data, but reinstall apps.

Common Mistakes

  • Skipping the memory test. The most common cause is faulty RAM, so don’t skip step 2.
  • Not updating chipset drivers. Outdated chipset drivers can cause HAL memory allocation failures. Always update them from the motherboard manufacturer’s site.
  • Overclocking RAM. If you have XMP/EXPO enabled, try disabling it. Unstable overclocks are a frequent trigger.
  • Ignoring BIOS updates. Manufacturers often release updates that fix memory compatibility issues.
  • Using a single RAM stick test incorrectly. When testing with one stick, make sure it’s properly seated in the correct slot (usually slot 2 or 4, check your motherboard manual).

Tips

  • Back up your data. Before any hardware or BIOS changes, back up important files to an external drive.
  • Use a reliable RAM testing tool. Windows Memory Diagnostic is basic; MemTest86 (free version) is more thorough. You can create a bootable USB and run it overnight.
  • Keep a system restore point. Create one before making major changes (Control Panel → System → System Protection → Create).
  • Monitor temperatures. Overheating can cause memory errors. Use a tool like HWMonitor to check CPU and RAM temperatures.
  • Check for bent CPU pins. If you recently built or upgraded your PC, a bent pin on the CPU socket can cause memory issues. Inspect carefully.

Troubleshooting

If the error persists after trying all steps, consider these additional checks:

  • Test with a different RAM slot. Sometimes the motherboard slot itself is faulty. Try moving the RAM to a different slot.
  • Check for hardware conflicts. Remove all non-essential hardware (extra drives, PCIe cards, USB devices) and see if the error goes away.
  • Run a full system diagnostic. Use the manufacturer’s diagnostic tool for your PC (e.g., Dell SupportAssist, HP PC Hardware Diagnostics) to test the motherboard and CPU.
  • Verify the Windows installation. If you have a Windows installation USB, boot from it and choose “Repair your computer” → “Troubleshoot” → “Startup Repair.”
  • Check the Windows event log. After a crash, open Event Viewer (Win + R, type eventvwr.msc) and look under “Windows Logs” → “System” for events with source “BugCheck” or “Kernel-Power.” The details may point to a specific driver.

Frequently Asked Questions

What does Stop 0xAC mean exactly?

It means the HAL (Hardware Abstraction Layer) failed to allocate a block of memory. The HAL is a layer between Windows and your hardware; when it can’t get memory, it crashes to prevent data corruption.

Can I fix Stop 0xAC without reinstalling Windows?

Yes, in most cases. The steps above (memory test, driver updates, BIOS reset) resolve the issue without a reinstall. Reinstalling should be a last resort.

Is Stop 0xAC always caused by faulty RAM?

No, but RAM is the most common cause. Driver conflicts, BIOS settings, and even disk corruption can also trigger it. That’s why the guide covers multiple fixes.

How long should I run a memory test?

Windows Memory Diagnostic takes about 20-30 minutes. For a more thorough test, MemTest86 recommends at least 4 passes, which can take several hours. If you have time, run it overnight.

Will updating BIOS help if the error is random?

Yes, especially if the error appears after adding new RAM or changing memory settings. BIOS updates often improve memory compatibility and stability.

What if the error only happens during heavy gaming or video editing?

That suggests a load-dependent issue, like an unstable overclock or overheating. Disable any overclocking (including XMP) and monitor temperatures. If it persists, test RAM under load using a stress tool like Prime95’s Blend test.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →