sodcalculator

10 Tech How-To

Fix Windows Defender Error 0x80070422 (Service Disabled)

Guide 10-49406 · Updated · Step by step

Windows Defender error 0x80070422 usually appears when you try to turn on real-time protection or run a scan, and it means the Windows Defender service or its dependencies are disabled. This guide walks you through enabling the required services, fixing corrupted settings, and restoring Defender so your PC is protected again.

What You’ll Need

  • Administrator access to your Windows PC (you’ll need to confirm UAC prompts).
  • About 10–15 minutes of time.
  • If you use third-party antivirus, you may need to uninstall it first (see Troubleshooting).

Step-by-Step

  1. Open Services – Press Win + R, type services.msc, and press Enter. If prompted by User Account Control, click Yes.
  2. Locate Windows Defender Service – In the list, scroll to Windows Defender Antivirus Service (or just Windows Defender Service on older builds). Double-click it.
  3. Check Startup Type – In the Properties window, look at the “Startup type” drop-down. It should be Automatic (or Automatic (Delayed Start)). If it’s disabled, change it to Automatic.
  4. Start the Service – Click the Start button under “Service status”. If it starts, great. If it fails, note the error and continue to the next steps.
  5. Enable Dependencies – Windows Defender relies on several services. Check each of these and set them to Automatic, then start them if they aren’t running:
    • Security Center (wscsvc)
    • Windows Management Instrumentation (Winmgmt)
    • Remote Procedure Call (RPC) – usually already running, but verify it’s not disabled.
  6. Restart the PC – After changing service settings, reboot. Then try opening Windows Security and running a quick scan.
  7. Use Registry Fix (if still broken) – Press Win + R, type regedit, and press Enter. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinDefend. On the right, double-click Start and set its value to 2 (Automatic). Click OK and close the Registry Editor.
  8. Run System File Checker – Open Command Prompt as administrator (right-click Start > “Command Prompt (Admin)” or “Windows Terminal (Admin)”). Type sfc /scannow and press Enter. Wait for the scan to finish; it may take 10–15 minutes.
  9. Run DISM – In the same Command Prompt, run DISM /Online /Cleanup-Image /RestoreHealth and press Enter. This repairs Windows image files. Wait for completion.
  10. Reinstall Windows Security (if needed) – If the above steps don’t work, open PowerShell as administrator and run:
    Get-AppxPackage Microsoft.Windows.SecHealthUI | Reset-AppxPackage

    Then restart your PC.

Common Mistakes

  • Setting the service to Manual – Some guides suggest Manual, but Windows Defender needs Automatic. Manual can cause the error to return.
  • Forgetting to enable dependencies – Even if the Defender service is set to Automatic, it won’t start if Security Center or WMI are disabled.
  • Not restarting after changes – Service changes often require a reboot to take effect.
  • Using third-party antivirus without uninstalling – If you have another antivirus, Windows Defender may be disabled intentionally. Uninstall the third-party software completely (use its official removal tool) before trying to enable Defender.
  • Editing the registry without backing up – Always export the registry key before changing it, in case you need to revert.

Tips

  • Keep Windows updated – many Defender issues are fixed via Windows Update.
  • If you’re using Windows 10 Home, you can’t disable Defender via Group Policy; if the error persists, check that no group policy is forcing it off (only in Pro/Enterprise).
  • Run a full scan after fixing the service to ensure no malware caused the disruption.
  • Use the Windows Security app (not just the legacy Settings) to check protection status.

Troubleshooting

Service won’t start – If you get an error like “Access denied” or “The service did not respond”, run the System File Checker and DISM as shown above. If that doesn’t help, check if your Windows account has full administrator rights (not just standard user).

Error persists after following all steps – This can happen if another security program left remnants. Uninstall any third-party antivirus using its official removal tool, then re-run the steps. If you still see the error, you can try a Windows “in-place upgrade” (run the Windows installer while keeping files) to repair the OS components.

Registry edit doesn’t stick – If the Start value reverts to 4 (disabled) after reboot, a group policy or a third-party tool is overriding it. Check Group Policy: run gpedit.msc (Pro/Enterprise) and navigate to Computer Configuration > Administrative Templates > Windows Components > Windows Defender Antivirus. Ensure “Turn off Windows Defender Antivirus” is set to “Not Configured”.

Windows Security shows “No active antivirus” – After fixing the service, open Windows Security and click “Turn on” if prompted. If the button is greyed out, restart the PC and try again.

Frequently Asked Questions

Why did my Windows Defender get disabled?

Common causes include third-party antivirus installation, group policy changes, corrupted system files, or a Windows update glitch. Sometimes malware disables it to avoid detection.

Can I fix this without admin rights?

No, you need administrator privileges to change service settings and edit the registry. If you’re on a work or school PC, contact your IT administrator.

Is it safe to edit the registry?

Yes, if you follow the exact steps and back up the key first. Incorrect registry edits can cause system issues, so be careful.

Will I lose any files by running SFC or DISM?

No, these tools only repair Windows system files and do not touch your personal data.

Do I need to uninstall my third-party antivirus?

Yes, if you want to use Windows Defender. Windows automatically disables Defender when another antivirus is active. Uninstall the other program completely, then enable Defender.

What if the error appears after a Windows update?

Try running the Windows Update troubleshooter (Settings > Update & Security > Troubleshoot > Additional troubleshooters). If that fails, use the SFC and DISM commands as described above.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →