sodcalculator

10 Tech How-To

Force High Refresh Rate on All Android Apps

Guide 10-50755 · Updated · Step by step

This guide shows you how to force a high refresh rate (90Hz, 120Hz, or 144Hz) on every Android app, even those that are not optimized for it. You will learn how to override the system’s default refresh rate selection, which often locks certain apps to 60Hz to save battery. This makes scrolling, animations, and transitions feel noticeably smoother across your entire phone.

What You’ll Need

  • An Android phone with a display that supports a refresh rate higher than 60Hz (check your phone’s specs).
  • Android 11 or newer for the built-in method. Older versions may require third-party tools.
  • Developer Options enabled on your phone (see Step 1).

Step-by-Step

  1. Enable Developer Options. Go to Settings > About Phone. Tap the Build Number seven times in a row. You will see a message saying “You are now a developer!” This unlocks the Developer Options menu.
  2. Open Developer Options. Go back to the main Settings menu and scroll down. Tap System > Developer Options (on some phones it is directly in the main Settings list).
  3. Find the Refresh Rate setting. Scroll through the Developer Options menu. Look for an entry labeled Force peak refresh rate, Force 120 Hz, or High refresh rate. The exact name varies by manufacturer (Samsung, OnePlus, Google, etc.).
  4. Turn it on. Toggle the switch to the On position. This tells the system to always use the highest refresh rate the display supports, regardless of what each app requests.
  5. Restart your phone (recommended). Some apps and the system UI may not immediately apply the new setting. A quick restart ensures the change takes effect cleanly.
  6. Verify it is working. Open an app that previously felt like 60Hz (e.g., a maps app or a social media feed). Scroll quickly. The motion should feel noticeably smoother and more fluid. You can also check your phone’s refresh rate display in the Developer Options if it has a “Show refresh rate” overlay toggle.

If your phone does not have this option: You can use the Android Debug Bridge (ADB) from a computer. Connect your phone via USB with USB debugging enabled, then run the command: adb shell settings put system peak_refresh_rate 120 (replace 120 with your screen’s maximum refresh rate). This writes the setting directly and often works on phones where the toggle is hidden.

Common Mistakes

  • Enabling the wrong setting. Some phones have a “Show refresh rate” option that only displays the current rate; it does not change it. Make sure you toggle the one that says “Force” or “Peak.”
  • Forgetting to restart. The setting often applies immediately, but a restart clears any cached app states that may be holding the old refresh rate.
  • Using a third-party app that requires root. Most “force 120Hz” apps on the Play Store need root access. The built-in Developer Option or ADB method works without root and is safer.
  • Not checking app-specific overrides. Some phones (like Samsung) have a separate “App refresh rate” or “Battery” menu that can override the global setting per app. Make sure no app is individually set to 60Hz there.

Tips

  • Battery life trade-off. Forcing a high refresh rate will increase battery drain, often by 5–15%. If you want to save battery, turn the setting off and rely on the phone’s adaptive refresh rate.
  • Use adaptive mode when possible. If your phone has a “Adaptive” or “Auto” refresh rate mode, it will switch between 60Hz and the high rate automatically. This is a good middle ground for battery life.
  • Test with a scrolling benchmark. Open a long webpage or a list of emails and scroll. The difference between 60Hz and 120Hz is most obvious on fast, continuous scrolling.
  • Check for overheating. If your phone gets warm during normal use after forcing the refresh rate, consider turning it off during gaming or heavy tasks.

Troubleshooting

  • The setting is grayed out. This usually means your display does not support a refresh rate above 60Hz, or the phone’s firmware has locked it. Check your phone’s official specs. If it supports 90Hz or 120Hz, try the ADB command method instead.
  • Nothing changed after enabling. First, restart the phone. Then, check if your phone has a separate “Battery” or “Display” setting that caps the refresh rate (e.g., “Standard” vs. “High” in Display settings). Set that to the highest option. Finally, verify with the “Show refresh rate” overlay in Developer Options.
  • Some apps still run at 60Hz. A few apps (like video players and camera apps) intentionally lock to 60Hz to save power or because their content is 60fps. This is normal and cannot be overridden in most cases.
  • Battery drains very fast. The high refresh rate is likely the cause. Turn off the force setting and use adaptive mode instead. You can also lower the screen resolution if your phone allows it, which reduces GPU load.
  • The ADB command fails with “device not found.” Make sure USB debugging is enabled, the phone is unlocked and shows the “Allow USB debugging” prompt, and you have installed the correct ADB drivers for your phone brand.
  • After a system update, the setting resets. This is common. Simply re-enable the Developer Option and toggle the setting again.

Frequently Asked Questions

Will forcing 120Hz damage my phone’s screen? No. The display is designed to run at that refresh rate. It will not cause physical damage, though it will use more battery and generate slightly more heat.

Does this work on all Android phones? Only on phones whose displays support a refresh rate higher than 60Hz. If your phone is a budget model with a 60Hz panel, there is nothing to force.

Is this the same as “Adaptive” refresh rate? No. Adaptive mode lets the phone choose the refresh rate dynamically. Forcing it locks the display to the maximum at all times.

Will this make games run faster? It can make games look smoother if the game itself runs at a high frame rate. It does not increase the game’s internal FPS; it only changes how often the screen updates.

Can I force 144Hz on a 120Hz phone? No. You can only force the maximum refresh rate that the display hardware physically supports.

Does this void my warranty? No. It is a standard Android developer setting. It does not require root or any modification to the system partition.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →