sodcalculator

10 Tech How-To

How to Force Restart iPhone 13 (Step-by-Step)

Guide 10-55776 · Updated · Step by step

If your iPhone 13 is frozen, unresponsive, or stuck on a black screen, a force restart is the quickest way to bring it back without losing any data. Unlike a normal restart, a force restart bypasses the software and directly resets the hardware. You don’t need any tools or a computer—just your iPhone and your fingers.

What You’ll Need

  • Your iPhone 13 (any model: mini, standard, Pro, or Pro Max)
  • A few seconds of patience—no other equipment required

Step-by-Step

  1. Locate the three buttons: On the right side of your iPhone, you’ll find the side button (also called the power button). On the left side, there are two volume buttons: the volume up and volume down.
  2. Press and release volume up: Quickly press the volume up button and let it go. Do not hold it.
  3. Press and release volume down: Quickly press the volume down button and let it go. Again, do not hold it.
  4. Press and hold the side button: Immediately after releasing the volume down button, press and hold the side button (on the right edge). Keep holding it.
  5. Wait for the Apple logo: Continue holding the side button for about 10–15 seconds. You’ll see the screen go black, and then the Apple logo will appear. Once the logo shows, release the side button.
  6. Let your iPhone boot up: After releasing, your iPhone will finish starting up. This may take a minute or two. Once the home screen appears, your iPhone is ready to use.

Common Mistakes

  • Holding the volume buttons: The volume buttons must be pressed and released quickly. If you hold them down, the sequence won’t work.
  • Pressing the side button too early: You must press the side button only after releasing the volume down button. If you press it during the volume steps, it may trigger a screenshot or an emergency SOS countdown.
  • Releasing the side button too soon: If you let go of the side button before the Apple logo appears, the force restart won’t complete. Keep holding until you see the logo.
  • Confusing with a normal restart: A force restart is different from sliding to power off. If your screen is responsive, you can do a normal restart via Settings > General > Shut Down, but a force restart is for when the screen is frozen or unresponsive.

Tips

  • Use the correct buttons: On iPhone 13, the side button is on the right edge, not the top. The top has no buttons.
  • Don’t worry about data loss: A force restart does not erase any of your data. It’s safe to do as often as needed.
  • If the screen is black but not frozen: If your iPhone is off or the battery is completely drained, a force restart won’t help. Plug it into power and wait a few minutes before trying again.
  • Force restart for other issues: You can also use this method if your iPhone is stuck on the Apple logo during startup, or if the screen is unresponsive to touches.

Troubleshooting

If the force restart doesn’t work on the first try, here’s what to do:

  • Try again: Sometimes the timing is slightly off. Wait a few seconds, then repeat the steps exactly: press volume up, release, press volume down, release, then hold the side button until the Apple logo appears.
  • Check your battery: If your iPhone has been dead for a while, it may need to charge for at least 5–10 minutes before it can restart. Plug it into a charger and try again.
  • Connect to a computer: If the force restart still doesn’t work, connect your iPhone to a computer with a Lightning cable. Open Finder (on macOS Catalina or later) or iTunes (on Windows or older macOS). If your iPhone appears, you may need to update or restore it. If it doesn’t appear, try a different cable or port.
  • Check for physical damage: If your iPhone has been dropped or exposed to water, the buttons may be damaged. In that case, you may need to visit an Apple Store or authorized service provider.
  • If the Apple logo appears but then disappears: This could indicate a deeper software issue. You may need to put your iPhone into recovery mode (using a computer) and restore it.

Frequently Asked Questions

Will a force restart delete my data?

No. A force restart is safe and does not erase any of your photos, messages, apps, or settings. It simply resets the hardware and forces the software to reload.

How is a force restart different from a normal restart?

A normal restart (swipe to power off) allows the software to shut down gracefully, closing apps and saving data. A force restart is a hardware-level reset that bypasses the software, used when the screen is unresponsive or the system is frozen.

Can I force restart my iPhone 13 if the screen is completely black?

Yes, you can. Even if the screen is black, the buttons still work. Follow the same steps, and you should see the Apple logo appear if the issue is software-related. If the screen remains black, the battery might be dead or there could be a hardware problem.

Why does my iPhone 13 not respond to the force restart?

If the force restart doesn’t work, it could be due to a drained battery, a hardware issue with the buttons, or a more serious software problem. Try charging your iPhone for at least 10 minutes, then attempt the force restart again. If it still fails, connect to a computer and try recovery mode.

Is it okay to force restart my iPhone 13 frequently?

Yes, it’s safe to force restart as often as needed. It doesn’t harm the hardware or software. However, if you find yourself needing to force restart regularly, it might indicate an underlying issue that you should investigate.

Does a force restart fix all problems?

No, a force restart only fixes temporary software glitches, such as a frozen app or an unresponsive screen. It won’t fix hardware damage, water damage, or severe software corruption. For those, you may need to restore your iPhone or get professional help.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →