sodcalculator

10 Tech How-To

How to Get Better Signal on iPhone: 14 Fixes

Guide 10-51829 · Updated · Step by step

Weak cellular signal on an iPhone is a common frustration, but you can often improve it without a new phone or carrier plan. This guide covers the most effective fixes, from quick software toggles to physical positioning changes, so you can get back to reliable calls and data.

What You’ll Need

  • Your iPhone (any model running a recent iOS version)
  • Access to Settings app
  • Optional: a paperclip or SIM eject tool (for SIM card troubleshooting)
  • Optional: a different location (for testing signal strength)

Step-by-Step

  1. Check your signal strength properly. The bars in the status bar are not precise. To see the actual signal in dBm, open the Phone app, dial *3001#12345#* and press call. This opens Field Test mode. You’ll see a number like -100 or -115. Anything above -90 dBm is excellent, -90 to -110 is good, and below -110 is poor. Exit by pressing the Home button or swiping up.
  2. Toggle Airplane Mode. Swipe down from the top-right corner (or up from the bottom on older models) to open Control Center. Tap the airplane icon to turn it on, wait 5 seconds, then tap it off. This forces your iPhone to re-scan for the best available network.
  3. Restart your iPhone. Press and hold the side button and either volume button until the power off slider appears. Slide to power off, wait 30 seconds, then press and hold the side button to turn it back on. This clears temporary software glitches that can affect the modem.
  4. Update iOS. Go to Settings > General > Software Update. If an update is available, tap “Download and Install.” Carrier settings updates often come bundled with iOS updates, which can improve network compatibility.
  5. Check for carrier settings update. Go to Settings > General &em; About. If a carrier update is available, you’ll see a prompt to update. If not, you’ll see “Carrier” with your carrier name and version, but no prompt.
  6. Reset Network Settings. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This clears saved Wi-Fi passwords, Bluetooth pairings, and cellular settings. You’ll need to re-enter Wi-Fi passwords afterward, but it often resolves stuck network configurations.
  7. Remove and reinsert your SIM card. Use a paperclip or SIM eject tool to pop out the SIM tray (located on the right side of the iPhone). Remove the SIM, inspect it for damage, and reseat it firmly. If you have an eSIM, skip this step.
  8. Move to a better location. Signal strength varies dramatically with obstacles. Move near a window, go upstairs, or step outside. Avoid basements, elevators, and buildings with thick concrete or metal walls.
  9. Remove your phone case. Some cases, especially those with metal or thick rubber, can block or attenuate the antenna signal. Test your signal without the case to see if it improves.
  10. Turn off Wi-Fi calling if it’s causing issues. Go to Settings > Cellular > Wi-Fi Calling and toggle it off. Wi-Fi calling can sometimes cause dropped calls or poor audio if your Wi-Fi is weak, even if cellular is fine.
  11. Switch to 4G instead of 5G. Go to Settings > Cellular > Cellular Data Options > Voice & Data and select “4G” or “LTE.” 5G can sometimes be weaker indoors or in fringe areas; 4G often provides a more stable connection.
  12. Manually select a network operator. Go to Settings > Cellular > Network Selection and turn off “Automatic.” Wait for the list to populate, then choose your carrier. This can help if your iPhone is stuck on a weak roaming network. Turn Automatic back on after testing.
  13. Enable “Reduce Interference” (if available). On iPhone 12 and later, go to Settings > Cellular > Cellular Data Options > Voice & Data and toggle on “Reduce Interference.” This uses a setting that can help in areas with signal interference, but may slightly reduce data speeds.
  14. Contact your carrier. If you’ve tried everything and still have poor signal, there may be an outage in your area, a problem with your account, or a faulty SIM. Call your carrier’s support line or use their app to report the issue.

Common Mistakes

  • Misreading signal bars: Bars are not linear; they vary by manufacturer and iOS version. Rely on the dBm reading from Field Test mode for an accurate measure.
  • Forgetting to reset network settings after a major iOS update: Sometimes a fresh network configuration is needed after an update.
  • Using a metal or magnetic phone case: These can physically block the antenna. Test without the case.
  • Assuming Wi-Fi calling is always better: If your Wi-Fi is weak, Wi-Fi calling can be worse than cellular. Try turning it off.
  • Not checking for carrier settings updates: These are separate from iOS updates and can fix network bugs.

Tips

  • Use Wi-Fi calling when you’re in a dead zone: If you have a weak cellular signal but a strong Wi-Fi connection, enable Wi-Fi calling in Settings > Cellular &em; Wi-Fi Calling. This routes calls and texts over your Wi-Fi network.
  • Try a signal booster: If you’re in a fixed location (like home or office) with poor signal, consider a cellular signal booster that repeats the signal from outside. These are legal in most countries, but check with your carrier.
  • Keep your iPhone updated: Apple frequently improves modem firmware in iOS updates, which can improve signal reception.
  • Check for network congestion: If your signal is fine but data is slow, it might be network congestion. Try again at off-peak hours.
  • Use a different location for calls: If you’re at home, try moving to a different room. Signal can vary by just a few feet.

Troubleshooting

If you still have no signal after trying all steps:

  • Check for a carrier outage: Visit your carrier’s website or social media to see if there’s a known outage in your area.
  • Try your SIM in another phone: If the SIM works in another phone, the issue is with your iPhone’s hardware. If it doesn’t work, the SIM may be faulty.
  • Restore your iPhone: As a last resort, back up your iPhone and restore it to factory settings via Finder or iTunes. This can fix deep software issues that affect the modem.
  • Contact Apple Support: If the problem persists, there may be a hardware issue with the antenna or modem. Contact Apple Support or visit an Apple Store for diagnostics.

Frequently Asked Questions

Why does my iPhone show full bars but still have slow data?

Bars indicate signal strength, not data speed. Slow data can be due to network congestion, a weak backhaul connection, or your carrier throttling data after a certain usage threshold.

Does a phone case really affect signal?

Yes, especially cases with metal components, thick rubber, or magnetic mounts. These can block or detune the antenna, reducing signal strength. Test without the case to see if it helps.

Will resetting network settings delete my photos or contacts?

No, resetting network settings only clears Wi-Fi passwords, Bluetooth pairings, and cellular settings. Your photos, contacts, and other data are not affected.

How do I know if my iPhone is on 5G or 4G?

Go to Settings > Cellular > Cellular Data Options > Voice & Data. The current selection is highlighted. You can also check the status bar for the “5G” or “LTE” icon.

Can I force my iPhone to use a specific carrier network?

Yes, you can manually select a carrier in Settings > Cellular > Network Selection. Turn off Automatic and pick your carrier from the list. This can help if your iPhone is stuck on a weaker roaming network.

Is it worth buying a signal booster?

If you’re in a fixed location with consistently poor signal, a booster can help. However, they require a decent outdoor signal to amplify, and they must be approved by your carrier. Check with your carrier before purchasing.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →