sodcalculator

10 Tech How-To

How to Get Into a Locked iPhone 15 (No Passcode)

Guide 10-48168 · Updated · Step by step

This guide covers the legitimate ways to regain access to a locked iPhone 15 when you’ve forgotten the passcode, bought a used device that’s still tied to someone else, or the screen is unresponsive. The method you use depends on whether you know the Apple ID password and whether the device has been previously synced with a computer. We’ll walk through each official recovery path, from the fastest software-based reset to the hardware button method for a completely locked-out phone.

What You’ll Need

  • A computer (Mac or Windows PC) with the latest version of iTunes installed, or a Mac running macOS Catalina or later (which uses Finder).
  • The original USB-C charge cable that came with the iPhone 15 (or any certified USB-C to USB cable).
  • Your Apple ID password and the associated email address, if you plan to restore from a backup or erase via iCloud.
  • If you’re unlocking a used phone, proof of purchase may be required to contact Apple Support for activation lock removal.

Step-by-Step

Method 1: Using a Computer (For Forgotten Passcode)

  1. Ensure your computer is updated. On a Mac, update to the latest macOS. On a PC, install the latest version of iTunes from Apple’s website.
  2. Turn off the iPhone 15. Press and hold the Side button and either Volume button until the power-off slider appears. Drag the slider. If the screen is unresponsive, force-restart it (see Troubleshooting).
  3. Put the iPhone into Recovery Mode. With the phone off, press and hold the Side button (on the right edge) and connect the USB-C cable to your computer while still holding the Side button. Do not release the Side button until you see the Recovery Mode screen—a computer icon with a cable on a black background.
  4. Open Finder or iTunes. On a Mac with Catalina or later, open Finder. On a PC or older Mac, open iTunes. A dialog will appear: “There is a problem with the iPhone that requires it to be updated or restored.”
  5. Choose “Restore”. Click the Restore button. This will download the latest iOS software and erase your iPhone. Wait for the process to finish; it can take 10-15 minutes depending on your internet speed.
  6. Set up your iPhone. After the restore completes, the phone will restart to the “Hello” screen. You can set it up as new or restore from a backup you made previously.

Method 2: Using iCloud Find My (If Find My iPhone Was Enabled)

  1. Go to iCloud.com/find on any computer or another device and sign in with the Apple ID that was used on the locked iPhone.
  2. Select “All Devices” at the top and choose your iPhone 15 from the list.
  3. Click “Erase iPhone”. This will remotely wipe the device and remove the passcode. You will need to enter your Apple ID password to confirm.
  4. Wait for the erase to complete. The phone must be connected to Wi-Fi or cellular for this to work. Once erased, the phone will show the “Hello” screen.
  5. Set up the phone. You can restore from an iCloud backup during setup, or set it up as new. If you don’t want the new user to be locked out, remove the device from your Apple ID account afterward.

Method 3: For a Used iPhone with Activation Lock (Previous Owner’s Apple ID)

  1. Contact the previous owner. Ask them to sign into iCloud.com/find, select the device, and click “Remove from Account”. This instantly disables Activation Lock.
  2. If you can’t reach the owner, go to Apple’s Activation Lock support page and start a request. You’ll need to provide the original proof of purchase (receipt showing the serial number).
  3. Wait for Apple’s response. They typically review within a few days. If approved, the lock is removed from their servers, and you can set up the phone normally.

Common Mistakes

  • Releasing the Side button too early. In Recovery Mode, you must hold the Side button until the computer icon appears. Releasing it after the Apple logo appears means you missed the window; you’ll need to repeat the process.
  • Using a non-data cable. Some USB-C cables are charge-only. If the computer doesn’t recognize the phone, try a different cable, preferably the one that came with the phone.
  • Trying to guess the passcode repeatedly. After 10 failed attempts, the iPhone will be disabled and require a computer restore anyway. Don’t waste time; go straight to Recovery Mode.
  • Forgetting to back up. A restore erases everything. If you never backed up, your photos and messages are gone. There is no way around this for a forgotten passcode.
  • Using iCloud Erase when the phone is offline. The erase command queues but won’t execute until the phone connects to the internet. If the phone is stolen, this can delay the lock.

Tips

  • Use a wired connection. For the computer method, plug the iPhone directly into a USB port on the computer, not a hub or keyboard port, to avoid connection drops.
  • Keep the phone plugged in during restore. If the battery dies mid-restore, you can brick the phone. Connect to power if possible.
  • Note your Apple ID credentials. After a restore, you’ll be asked for the Apple ID password that was on the phone (Activation Lock). If you don’t know it, the computer method won’t fully unlock the phone.
  • Try a different computer. If your PC has driver issues, try a friend’s Mac or a different Windows machine. Sometimes the Apple Mobile Device USB driver needs a fresh install.
  • Use DFU mode as a last resort. If Recovery Mode fails, DFU (Device Firmware Update) mode can force a restore. To enter DFU: connect to computer, turn off phone, hold Side button for 3 seconds, then hold both Side and Volume Down for 10 seconds, then release Side but keep holding Volume Down for 5 seconds. The screen stays black—if you see the Apple logo, you missed it.

Troubleshooting

  • Computer says “iPhone could not be restored. An unknown error occurred (error 4013).” This usually means a USB connection issue. Try a different port, a different cable, and restart both the phone and computer. If it persists, the phone may have a hardware issue.
  • Recovery Mode won’t appear. Make sure the phone is completely off (not just screen off). If the screen is frozen, force-restart: press Volume Up, then Volume Down, then hold the Side button until the Apple logo appears. Then try Recovery Mode again.
  • iCloud Erase says “Pending”. The phone is offline. Wait until it connects to Wi-Fi or cellular. If it’s a stolen phone, this may never happen; contact your carrier to blacklist it.
  • After restore, it asks for the previous owner’s Apple ID. This is Activation Lock. You cannot bypass it. You must contact the previous owner or Apple Support with proof of purchase.
  • The phone is disabled and says “Connect to iTunes”. This is expected. Plug it into a computer and follow Method 1. It will automatically enter Recovery Mode.

Frequently Asked Questions

Q: Can I unlock my iPhone 15 without a computer?
A: Only if Find My iPhone was enabled and the phone has internet access. You can erase it remotely from iCloud.com/find. Otherwise, a computer is required for the Recovery Mode restore.

Q: Will a factory reset remove the Activation Lock?
A: No. Activation Lock is tied to the Apple ID and is stored on Apple’s servers. A restore only removes the passcode, not the Apple ID lock. You’ll still need the original Apple ID password.

Q: I bought a used iPhone 15 and it’s locked to someone else. What can I do?
A: Ask the seller to remove it from their iCloud account. If they won’t or can’t, you need Apple Support with the original receipt. Without that, the phone is a paperweight.

Q: Is there a way to bypass the passcode without erasing data?
A: No. Apple’s security design means the only way to remove a forgotten passcode is to erase the phone. If you have an iCloud or iTunes backup, you can restore your data after the erase.

Q: How long does the restore take?
A: The download of iOS can take 5-20 minutes depending on your internet speed. The actual restore to the phone takes another 5-10 minutes. Total time is usually under 30 minutes.

Q: What if my iPhone 15 has a damaged screen and I can’t see anything?
A: Connect it to a computer and enter Recovery Mode by holding the buttons as described. The computer will still detect it. You can restore it blindly, but you won’t be able to set it up without a working screen.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →