Restore mode (also called recovery mode) is a special iPhone state used to reinstall iOS or fix serious software problems. When your iPhone is stuck on the connect-to-computer screen or won’t boot past the Apple logo, this guide will walk you through getting it back to normal. You’ll need a computer (Mac or Windows) and a compatible USB cable.
What You’ll Need
- A Mac or Windows PC with the latest version of Finder (macOS Catalina or later) or iTunes (Windows or older macOS).
- A USB-to-Lightning or USB-C cable that came with your iPhone or is Apple-certified.
- Your iPhone’s passcode (if you need to trust the computer).
- Enough battery charge (ideally above 20%) or plug your iPhone into power while connected.
Step-by-Step
- Update your computer software. Make sure macOS or iTunes is up to date. On a Mac with Catalina or later, use Finder. On Windows or older macOS, use iTunes. If you’re not sure, open the app and check for updates in the menu bar.
- Connect your iPhone to the computer. Use a cable that supports data transfer (not just charging). Plug one end into your iPhone and the other into a USB port on your computer. If prompted, tap “Trust This Computer” on your iPhone and enter your passcode.
- Open Finder or iTunes. On a Mac, click the Finder icon in the Dock. On Windows, open iTunes. If you’re on a Mac with an older macOS, open iTunes as well.
- Locate your iPhone. In Finder, look under “Locations” in the sidebar and click your iPhone. In iTunes, click the device icon near the top-left corner of the window.
- Check for an option to update or restore. If your iPhone is in restore mode, you’ll see a message saying “There is a problem with the iPhone that requires it to be updated or restored.” You’ll have two buttons: “Update” and “Restore.”
- Choose “Update” first. Clicking Update will try to reinstall iOS without erasing your data. This is the safer option and often fixes the issue. Your computer will download the software and install it on your iPhone. This can take 10–30 minutes depending on your internet speed.
- Wait for the process to finish. Keep your iPhone connected and do not unplug it. Your iPhone may restart several times. When the progress bar completes, your iPhone will boot to the home screen or the setup screen.
- If Update fails, use “Restore.” If the Update option doesn’t work or your iPhone still won’t exit restore mode, go back to the same screen and click “Restore.” This will erase all data and install the latest iOS. Confirm when asked. Your iPhone will then be restored to factory settings.
- Set up your iPhone. After a successful restore, you’ll see the “Hello” screen. Follow the on-screen instructions to set up your iPhone as new or restore from a backup.
Common Mistakes
- Using a charge-only cable. Some cables only carry power, not data. If your computer doesn’t recognize your iPhone, try a different cable (preferably the one that came with your iPhone).
- Unplugging too early. Interrupting the update or restore process can leave your iPhone in a worse state. Always wait until the progress bar completes and your iPhone restarts.
- Choosing Restore when you meant Update. Restore erases everything. If you have a recent backup, it’s not a disaster, but it’s still a hassle. Always try Update first.
- Not updating iTunes/Finder. An outdated version may not support your iPhone model or iOS version, causing errors.
- Ignoring battery warnings. If your iPhone dies mid-restore, it could cause a permanent failure. Plug your iPhone into power if the battery is low.
Tips
- Use a USB port directly on your computer. Avoid hubs or front-panel ports that may not provide stable power or data.
- Close other apps. Some programs can interfere with the connection. Close unnecessary apps on your computer before starting.
- Try a different USB port. If your computer doesn’t recognize your iPhone, switch to another port.
- Force restart your iPhone first. Sometimes a simple force restart can kick it out of restore mode without needing a computer. The method varies by model:
- iPhone 8 or later: Press and quickly release Volume Up, then Volume Down, then press and hold the Side button until the Apple logo appears.
- iPhone 7/7 Plus: Press and hold both the Side and Volume Down buttons until the Apple logo appears.
- iPhone 6s or earlier: Press and hold both the Home and Side (or Top) buttons until the Apple logo appears.
- Keep your iPhone plugged in overnight. If the update is taking a long time, let it run. Do not disconnect it.
Troubleshooting
If the steps above don’t work, try these additional fixes:
- iPhone not recognized by computer. Make sure the cable is firmly connected. Try a different cable or a different computer. If you’re on Windows, install the latest Apple Mobile Device USB driver (usually done automatically when you install iTunes).
- Error 4013 or 4014. These errors often indicate a connection issue. Try a different cable, port, or computer. Also, restart your computer and iPhone.
- Error 9 or 4005. These can be hardware-related. Try a different cable and port. If the error persists, your iPhone may have a hardware issue that requires Apple Support.
- Update or Restore gets stuck. If the progress bar stays at the same spot for over an hour, your internet may be slow. Let it continue. If it’s been several hours, disconnect and try again with a wired internet connection (if possible).
- iPhone still shows the connect-to-computer screen after restore. This can happen if the restore didn’t complete. Repeat the process, but this time, try a different computer or cable.
- If all else fails, use a third-party tool (optional). Some reputable tools like ReiBoot or iMyFone Fixppo claim to exit restore mode without data loss. However, use them at your own risk—they are not official and may not work. Always back up your data if possible before using them.
Frequently Asked Questions
Will I lose my data if I exit restore mode?
If you choose “Update,” your data is preserved. If you choose “Restore,” all data is erased. If you have a backup (iCloud or computer), you can restore it afterward.
How do I know if my iPhone is in restore mode?
You’ll see a black screen with a Lightning cable pointing to a computer or a laptop icon. This screen appears when the iPhone is in recovery mode.
Can I exit restore mode without a computer?
Sometimes a force restart (see Tips) can exit restore mode without a computer. If that doesn’t work, you’ll need a computer to update or restore.
Why did my iPhone enter restore mode in the first place?
Common causes include a failed iOS update, a corrupted system file, or a hardware issue. It can also happen if you tried to jailbreak or modify the system.
How long does the update or restore take?
It depends on your internet speed and the iOS version. Typically, it takes 10–30 minutes. If it takes longer, be patient.
What if my iPhone is disabled or I forgot my passcode?
If your iPhone is disabled, you’ll need to restore it (which erases data). If you forgot your passcode, you’ll also need to restore. In both cases, you’ll lose data unless you have a backup.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Create App Shortcuts in Windows 10 Start Menu
- How to Rename a SQL Server Database
- Recover Deleted Admin Account in Windows 11
- Install Custom Recovery on Samsung Galaxy E5
- Fix Administrator Blocked You From Running This App Error
- Fix Google Calendar Not Syncing on iPhone