sodcalculator

10 Tech How-To

iOS 18 Control Center: Add Wi-Fi, Cellular & Bluetooth Icons

Guide 10-45258 · Updated · Step by step

In iOS 18, Apple completely redesigned Control Center, and the old single connectivity tile (the one with airplane mode, Wi-Fi, Bluetooth, and cellular) is gone. Instead, you now add individual toggles for Wi-Fi, Cellular Data, and Bluetooth as separate icons. This guide shows you exactly how to add those icons to your Control Center, rearrange them, and fix common issues.

What You’ll Need

  • An iPhone or iPad running iOS 18 or later (check in Settings > General > Software Update).
  • Your device unlocked and on the Home Screen or Lock Screen.

Step-by-Step

  1. Open Control Center: Swipe down from the top-right corner of the screen (on an iPhone with Face ID) or swipe up from the bottom edge (on an iPhone with a Home button).
  2. Enter Edit Mode: Tap and hold anywhere on the empty space in Control Center until the icons start jiggling, or tap the + button in the top-left corner. You’ll see a Add a Control button appear.
  3. Tap “Add a Control”: A grid of available controls will slide up from the bottom. Scroll through the list or use the search bar at the top.
  4. Find the Connectivity Controls: Look for these three separate items:
    • Wi-Fi – shows the Wi-Fi icon and toggles Wi-Fi on/off.
    • Cellular Data – shows the cellular icon and toggles your mobile data on/off.
    • Bluetooth – shows the Bluetooth icon and toggles Bluetooth on/off.

    They are usually near the top of the list, but you can also type “Wi-Fi” or “Bluetooth” in the search bar.

  5. Tap the + (plus) next to each control: Tapping the plus icon adds it to your Control Center. It will appear in the main grid area.
  6. Position the icons: After adding, the new icon will appear with a highlighted border. Drag it to your preferred spot. You can place it in the main grid or in one of the smaller groups. Release your finger to drop it.
  7. Resize (optional): Some controls, like Wi-Fi and Bluetooth, can be resized. If you see a small handle on the bottom-right corner of the icon, drag it to make the icon larger or smaller. A larger icon shows more info (like the network name).
  8. Exit Edit Mode: Tap the Done button in the top-right corner, or tap anywhere outside the editing area. Your icons are now saved.
  9. Use the icons: Tap any of the new icons to toggle that feature on or off. A blue icon means it’s on; gray means off. Press and hold an icon to see more options (like choosing a Wi-Fi network or a Bluetooth device).

Common Mistakes

  • Looking for the old combined tile: In iOS 18, there is no single “Connectivity” tile anymore. You must add each icon separately. If you don’t see Wi-Fi, Cellular, or Bluetooth in your Control Center, you haven’t added them yet.
  • Not entering Edit Mode properly: Simply swiping down and tapping icons won’t let you add new ones. You must press and hold on empty space or tap the + button to enter edit mode.
  • Adding the wrong control: There is a “Wi-Fi” control and also a “Personal Hotspot” control. Make sure you’re adding the right one. Similarly, “Cellular Data” is different from “Cellular Plan” (which shows your SIM info).
  • Dragging icons out of the grid: If you drag an icon too far to the edge, it may disappear. Just drag it back into the grid area.
  • Forgetting to tap Done: If you exit by swiping down, your changes are still saved, but if you force-quit Control Center, it’s also fine. However, if you tap the Done button, you know you’ve exited cleanly.

Tips

  • Group them together: Place Wi-Fi, Cellular Data, and Bluetooth next to each other for quick access. You can also place them in the same row or column.
  • Use the larger size: For Wi-Fi and Bluetooth, the larger size shows the currently connected network or device name. This is handy if you switch networks often.
  • Press and hold for more options: A long press on the Wi-Fi icon opens a menu where you can pick a network, enable Personal Hotspot, or turn on AirDrop. The Bluetooth icon gives you a list of paired devices.
  • Reorder other controls: While in edit mode, you can also rearrange any other Control Center icons (like the flashlight or calculator) to make room for your new connectivity icons.
  • Remove icons you don’t use: If your Control Center feels crowded, tap the − (minus) button on any icon you don’t need to remove it and free up space.

Troubleshooting

The icons don’t appear after adding them: First, make sure you actually tapped the + button next to the control. If you did, try exiting edit mode and reopening Control Center. If they still don’t show, restart your iPhone (press and hold the side button and volume button, then slide to power off).

I can’t find the “Cellular Data” control: On an iPad (Wi-Fi only model), there is no Cellular Data control because the device doesn’t have a cellular radio. On an iPhone, it should be in the list. If you have a dual-SIM setup, you might see “Cellular Data” as a single toggle that controls the default line.

The icons are grayed out or not responding: This usually means the feature is turned off at a deeper level. For Wi-Fi and Bluetooth, check Settings > Wi-Fi and Settings > Bluetooth to make sure they aren’t disabled. For Cellular Data, check Settings > Cellular > Cellular Data. Also, Airplane Mode will disable all three – turn it off in Control Center (the airplane icon).

I added the icons but they disappeared after a restart: This is rare, but if it happens, try resetting your Control Center layout. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset Control Center Layout. This will remove any customizations, but it will also bring back the default controls. Then you can re-add your connectivity icons.

The icons are there but toggling doesn’t work: If tapping the icon doesn’t turn the feature on/off, try toggling it from the Settings app. If it works there, the issue is with Control Center. A simple restart usually fixes this. If not, go to Settings > Control Center and toggle “Access Within Apps” off and on again.

Frequently Asked Questions

Can I still get the old combined connectivity tile?

No. Apple removed the combined tile in iOS 18. You must add separate Wi-Fi, Cellular Data, and Bluetooth icons. There is no official way to get the old tile back.

Why is there no “Cellular” icon on my iPad?

If your iPad is a Wi-Fi-only model, it has no cellular hardware, so the “Cellular Data” control is not available. On a cellular iPad, it will appear in the list.

How do I remove a connectivity icon I added?

Enter edit mode (press and hold on empty space), tap the − (minus) button on the icon, then tap Remove. Tap Done to save.

Can I make the Wi-Fi icon show the network name?

Yes. When you add the Wi-Fi control, it appears in a small size by default. While in edit mode, drag the handle on the bottom-right corner of the icon to enlarge it. The larger size will display the current network name.

Will adding these icons drain my battery?

No. The icons themselves are just shortcuts. They don’t consume extra battery. However, leaving Wi-Fi, Bluetooth, or Cellular Data on when you don’t need them can affect battery life.

Do these icons work the same as the Settings toggles?

Yes. Tapping the Control Center icon toggles the same feature as the switch in Settings. The icon also reflects the current status (blue = on, gray = off).

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →