Remote Play lets you stream your PlayStation games to a phone, tablet, PC, or another console, but a shaky connection can turn it into a slideshow. This guide walks you through the network, hardware, and software tweaks that give you the smoothest, lowest-lag Remote Play experience possible, whether you’re at home or away.
What You’ll Need
- A PlayStation 4 or PlayStation 5 with Remote Play enabled
- The Remote Play app on your device (phone, tablet, PC, or Mac)
- A stable internet connection (home upload speed of at least 5 Mbps for 720p, 15 Mbps for 1080p)
- Optional: Ethernet cable for the console and/or the device
- Optional: A DualSense or DualShock 4 controller
Step-by-Step
- Connect your PlayStation to the internet via Ethernet. A wired connection is the single biggest improvement you can make. Plug an Ethernet cable from your router directly into the PS4 or PS5. In the console’s network settings, confirm it shows “LAN cable connected.” If you can’t wire the console, move it closer to the router or use a powerline adapter.
- Set up your console for Remote Play. On PS5, go to Settings > System > Remote Play and enable it. On PS4, go to Settings > Remote Play Connection Settings and check “Enable Remote Play.” Also, set the console to stay in Rest Mode (PS5: Settings > System > Power Saving > Features Available in Rest Mode; PS4: Settings > Power Saving Settings) and make sure “Stay Connected to the Internet” and “Enable Turning On PS5/PS4 from Network” are both checked.
- Use the Remote Play app’s video quality settings. In the app, go to Settings > Video Quality for Remote Play. Choose a resolution and frame rate that your network can actually handle. For most home networks, 720p at 60fps gives a better balance of clarity and responsiveness than 1080p at 30fps. If you still see lag, drop to 540p.
- Connect your device to the router with Ethernet if possible. If you’re using a PC or Mac, plug it into the same router with an Ethernet cable. For phones and tablets, you can’t use Ethernet, but you can use a USB-C to Ethernet adapter on many Android devices and newer iPads.
- If using Wi-Fi on your device, make sure it’s on the 5 GHz band. The 2.4 GHz band is more prone to interference and congestion. On your router’s settings, create a separate SSID for 5 GHz or disable band steering. Connect your device to that 5 GHz network.
- Reduce network congestion. Pause any large downloads, stop video streaming on other devices, and close bandwidth-hungry apps on your device. You can also set your router to prioritize traffic to your console and device using Quality of Service (QoS) settings, if available.
- Adjust your TV/monitor’s game mode. If you’re playing on a TV, enable “Game Mode” in its picture settings. This reduces input lag from the display itself, making the stream feel much more responsive.
- Connect your controller directly to the device you’re streaming to. For example, if you’re using a PC, connect the DualSense via USB cable rather than Bluetooth. This eliminates controller input lag that can be added by the Bluetooth connection.
- Close background apps on your console. On PS5, press the PlayStation button, go to Switcher, and close any games or apps you’re not using. On PS4, close apps from the home screen. This frees up system resources for the Remote Play stream.
- Test your network speed and stability. Run a speed test on the device you’re using for Remote Play. You want at least 15 Mbps download and 5 Mbps upload. More important than raw speed is latency (ping) — aim for under 50 ms to your local network. Also, check for packet loss using a tool like PingPlotter or by pinging your router.
Common Mistakes
- Using Wi-Fi on both the console and the device. Even if both are on 5 GHz, wireless is half-duplex and prone to interference. Wired is always better.
- Ignoring the video quality settings. Leaving it on “Automatic” can sometimes pick a higher resolution than your connection can handle, causing stutter. Set it manually.
- Not enabling Rest Mode features. If you want to start Remote Play while away, the console must be in Rest Mode and the network wake-up option enabled.
- Playing on a TV without Game Mode. The display adds 50-100 ms of lag if Game Mode is off, which is huge for a streaming experience.
- Streaming over the internet when you’re in the same house. If you’re at home, make sure you’re using the “Direct Connect” option in the app’s settings (on some devices) or that your device is on the same network as the console.
Tips
- For the best experience at home, use a wired connection for both the console and the device. This is the closest you’ll get to playing directly on the console.
- If you’re away from home, a 5 GHz Wi-Fi connection on the remote device is essential. Public Wi-Fi is often too slow and congested — a mobile hotspot with a strong signal can work better.
- Keep your console and app updated. Sony regularly releases updates that improve Remote Play performance.
- On PC, close any overlay apps (like Discord or GeForce Experience) that might interfere with the video stream.
- If you’re using a phone, turn off Bluetooth when not using a controller — it can cause interference with Wi-Fi on some devices.
Troubleshooting
Still laggy after following all steps? Try these in order:
- Restart your router and console. This clears up network glitches and frees up memory.
- Lower the resolution to 540p and frame rate to 30fps in the app. If it’s smooth, your network can’t handle higher settings.
- Check if other devices are saturating your upload bandwidth. If you’re streaming away from home, your console’s upload speed is critical — test it from the console’s browser.
- If you’re on a mesh Wi-Fi system, try disabling the mesh nodes and using just the main router for a test. Sometimes mesh backhaul adds latency.
- On PC, try disabling hardware acceleration in the Remote Play app’s settings. It can cause issues with some GPUs.
- If you’re using a VPN on your device, turn it off. VPNs add significant latency.
- As a last resort, reinstall the Remote Play app and restart your console in Safe Mode (hold the power button until the second beep) and select “Rebuild Database.” This can fix software glitches.
Frequently Asked Questions
Does Remote Play work over the internet?
Yes, you can connect to your PS5/PS4 from anywhere, but you need a strong upload speed on your home connection (at least 5 Mbps, ideally 15+ Mbps) and a stable, low-latency connection on the remote device.
Why is my Remote Play blurry?
Blurriness is usually caused by the app automatically lowering resolution to maintain frame rate. Set the video quality manually to a resolution your network can handle, and make sure your device is on 5 GHz Wi-Fi or wired.
Can I use Remote Play with a PS5 controller on PC?
Yes, the DualSense works with the Remote Play app on PC. For the lowest input lag, connect it via USB cable rather than Bluetooth.
Does Remote Play support 4K?
No, Remote Play is capped at 1080p on PS5 and 720p on PS4. The app doesn’t support 4K streaming.
Why does Remote Play disconnect randomly?
This is often due to Wi-Fi interference, network congestion, or the console going to sleep. Make sure your console is set to stay in Rest Mode and that your device’s Wi-Fi is stable. Also, check that your router isn’t set to reboot automatically.
Can I use Remote Play with a different network than my console?
Yes, you can connect from any network, but you’ll need to sign in to the same PlayStation Network account and have your console in Rest Mode with network features enabled.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Disable Autocorrect on iPhone or iPad: Quick Guide
- View Notification Count on iPhone: Full Guide
- Custom Keyboard Shortcuts on Windows 11 & macOS
- Restore Windows 11 Display Scaling to Recommended
- Semiconductor Cycle: How Investors Track It0.0
- Microsoft Store Error 0x80073d12: Fixes That Work