sodcalculator

10 Tech How-To

Bose Soundbar 500 Bass Settings: App & Subwoofer Guide

Guide 10-53852 · Updated · Step by step

This guide walks you through the Bose Music app to adjust bass on the Soundbar 500, including adding and configuring a separate subwoofer. You’ll learn where the bass controls live, how to tune them for movies vs. music, and how to fix common issues like weak bass or a subwoofer that won’t connect.

What You’ll Need

  • Bose Soundbar 500 (powered on and connected to your Wi-Fi network)
  • Bose Music app installed on your smartphone or tablet (iOS or Android)
  • Your phone/tablet on the same Wi-Fi network as the soundbar
  • Optional: Bose Bass Module 500 or 700 subwoofer (if you want to adjust subwoofer-specific settings)
  • Bose remote or the app’s remote screen (for some quick adjustments)

Step-by-Step

  1. Open the Bose Music app on your phone or tablet. If you haven’t already, create a Bose account and add your Soundbar 500 to the app by tapping the + icon and following the on-screen prompts.
  2. Select your Soundbar 500 from the list of devices in the app’s home screen. This takes you to the device control screen.
  3. Tap the gear icon (settings) in the top-right corner of the device screen. This opens the soundbar’s settings menu.
  4. Look for “Audio” or “Sound” settings. The exact label may vary slightly depending on your app version, but it’s usually under a section called “Audio” or “Sound.” Tap it.
  5. Find the “Bass” slider. In the Audio settings, you’ll see a slider labeled “Bass” with a range from -100 to +100 (or -10 to +10 on some versions). Drag the slider to the right (positive numbers) to increase bass. The default is usually 0. Start with +20 and adjust to taste.
  6. Adjust the “Treble” slider if needed. Increasing bass can sometimes make the sound muddy. A slight treble boost (+10 or +20) can help keep dialogue clear.
  7. If you have a Bose Bass Module 500 or 700, it should appear as a separate device in the app. Tap on the subwoofer’s name in the device list (or under “Devices” in settings).
  8. In the subwoofer’s settings, you’ll find its own bass level control. This is separate from the soundbar’s bass. Increase it to add more low-end punch. The Bass Module 700 also has a “Phase” setting – leave it at 0° unless you hear a boomy or hollow sound.
  9. If you don’t have a subwoofer yet, you can still increase bass on the soundbar itself. The Soundbar 500’s built-in drivers can produce a surprising amount of bass for its size, especially when placed near a wall.
  10. Test with your favorite music or a movie scene. Play something with a strong bass line. Adjust the sliders while the audio is playing to hear the changes in real time.
  11. Use the “Dialogue Mode” or “Night Mode” if available. These are separate from bass, but they affect overall sound. Night Mode reduces bass and overall volume, so if bass sounds weak, make sure Night Mode is off.
  12. Save your settings. The app usually saves changes automatically. If you see a “Save” button, tap it. Your bass settings will be remembered for all inputs (HDMI, optical, Bluetooth, etc.).

Common Mistakes

  • Confusing the soundbar bass with the subwoofer bass. They are separate controls. If you have a subwoofer and only adjust the soundbar’s bass, the subwoofer may still sound weak.
  • Turning bass all the way up. Maxing out the bass (+100) often causes distortion and can damage the speakers. It’s better to keep it moderate and use the subwoofer for extra punch.
  • Forgetting to check Night Mode. Night Mode dramatically reduces bass and dynamic range. If your bass seems weak, check that Night Mode is off.
  • Placing the soundbar inside a cabinet. Enclosed spaces muffle bass. The soundbar should have at least a few inches of clearance around it.
  • Not updating the app or firmware. Older versions may have different menu layouts or lack subwoofer controls.

Tips

  • Use the “Bass” slider for music, and the subwoofer for movies. For music, you often want a tighter bass; for movies, you want the rumble. Adjust per use case.
  • Place the subwoofer in a corner. Corner placement naturally boosts bass output. Experiment with a few positions – the difference can be dramatic.
  • Use the “Adaptiq” audio calibration if you have the optional ADAPTiQ headset. This feature (found in the app’s settings) measures your room’s acoustics and automatically optimizes the sound, including bass. Run it after moving furniture or the soundbar.
  • For TV dialogue clarity, don’t just boost bass. A slight treble increase and enabling “Dialogue Mode” (if available) often helps more than bass.
  • Check your source’s own volume. If you’re streaming from a phone, make sure the phone’s volume is maxed out. Low source volume will make the bass seem weak even with high soundbar bass.

Troubleshooting

  • Bass slider is grayed out. This usually means the soundbar is not connected to the app. Restart the app, make sure your phone is on the same Wi-Fi, and try again.
  • Subwoofer not appearing in the app. Ensure the subwoofer is plugged in and within 3 feet of the soundbar during setup. Try pressing and holding the “Connect” button on the back of the subwoofer for 5 seconds to enter pairing mode, then re-add it in the app.
  • Bass is distorted even at moderate levels. Lower the bass slider and check if the soundbar is placed too close to a wall (within 2 inches can cause booming). Also, make sure the bass module’s phase is set to 0°.
  • No bass after updating the app. Go to Settings > Audio and re-adjust the bass slider. Firmware updates sometimes reset audio settings to default.
  • Subwoofer connects but makes no sound. Check the subwoofer’s own volume in the app – it may be set to 0. Also, play a test tone or music with deep bass; some TV shows have very little low-end.
  • App says “Unable to connect to soundbar.” Power-cycle the soundbar (unplug for 10 seconds, plug back in) and restart the app. If the issue persists, check your Wi-Fi router – the soundbar requires a stable 2.4GHz or 5GHz connection.

Frequently Asked Questions

Can I increase bass without the app?

Yes, the Bose remote has a “Bass” button that cycles through preset levels (e.g., Low, Medium, High). But the app gives you finer control with a slider.

Does the Bose Soundbar 500 work with any subwoofer?

No, it only works with Bose Bass Module 500 or 700, or the Bose Surround Speakers 700 (which include some bass). Third-party subwoofers are not supported.

Why does my bass sound different on different inputs?

The bass setting is global, but the source material matters. Streaming music apps often have different mixing levels than movies. Also, Bluetooth audio may have reduced bass due to compression.

What is the best bass setting for movies?

Start with the soundbar bass at +30 and the subwoofer at +50. Adjust based on your room size. For a small room, you might need less.

Will increasing bass damage my soundbar?

Only if you max it out and play at very high volumes for long periods. Moderate increases (up to +50) are safe for normal listening.

How do I reset the bass settings to default?

In the app, go to Settings > Audio and set the Bass slider back to 0. If you want a full reset, go to Settings > System > Reset (this clears all settings).

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →