sodcalculator

10 Tech How-To

Install Custom Recovery on Samsung Galaxy Note

Guide 10-47750 · Updated · Step by step

Installing a custom recovery like TWRP on your Samsung Galaxy Note lets you flash custom ROMs, kernels, and mods, and create full system backups. This guide covers the general process for most Galaxy Note models; exact key combos and file names vary slightly by model, so confirm specifics for your device before starting.

What You’ll Need

  • A Samsung Galaxy Note with an unlocked bootloader (most carrier models need a code or may be locked).
  • A Windows PC (Mac/Linux can work but Odin is Windows-only).
  • Odin flashing tool (latest version).
  • The correct TWRP recovery image (.tar file) for your exact Note model.
  • USB cable (preferably the original) and Samsung USB drivers installed on your PC.
  • Backup of all important data – this process can wipe your device.

Step-by-Step

  1. Enable Developer Options and OEM Unlock. Go to Settings > About Phone, tap “Build Number” 7 times. Then go to Settings > Developer Options and enable “OEM Unlock” and “USB Debugging”. If OEM Unlock isn’t there, your bootloader may be locked.
  2. Download the right TWRP file. Visit the official TWRP site, find your exact model number (e.g., SM-N950F for Note 8, SM-N975F for Note 10+), and download the recovery .tar file. Do not use a file for a different model.
  3. Install Samsung USB drivers. If you haven’t already, install them so Odin can recognize your phone.
  4. Boot your Note into Download Mode. Power off the phone. Then press and hold Volume Down + Home (if present) + Power for a few seconds. On newer models without Home, use Volume Down + Power. Accept the warning by pressing Volume Up.
  5. Open Odin as Administrator. Right-click Odin.exe and select “Run as administrator”.
  6. Connect your phone to the PC. Use the USB cable. In Odin, the “ID:COM” box should turn blue and show a port number. If not, reinstall drivers or try a different USB port.
  7. Add the TWRP file to Odin. Click the “AP” button (or “PDA” on older Odin versions) and select the TWRP .tar file you downloaded. Leave all other buttons (BL, CP, CSC) empty.
  8. Disable “Auto Reboot” in Odin. Uncheck the “Auto Reboot” option in the Options tab. This is critical – you’ll manually reboot after flashing.
  9. Click “Start”. Odin will flash the recovery. Wait until you see “PASS!” in green. Do not unplug during this.
  10. Reboot directly into recovery. After PASS, unplug the phone, then press and hold Volume Up + Home + Power (or Volume Up + Power on newer models) until you see the TWRP screen. If you let it boot normally first, the stock recovery may overwrite TWRP.
  11. Allow system modifications (if prompted). TWRP may ask to keep system read-only or allow modifications. Swipe to allow modifications, then reboot to recovery once more to make sure it sticks.

Common Mistakes

  • Wrong TWRP file. Flashing a recovery for a different model can hard-brick your phone. Triple-check your model number in Settings > About Phone.
  • Letting the phone boot normally after flashing. This can cause the stock recovery to replace TWRP. Always manually reboot to recovery.
  • Forgetting to enable OEM Unlock. Without it, Odin may fail with a “custom binary blocked” error.
  • Using a USB hub or bad cable. This often causes Odin to hang or fail. Use a direct USB port and the original cable.
  • Not unchecking Auto Reboot. If Odin reboots the phone, you might miss the recovery boot window.

Tips

  • Before flashing, write down your model number and current Android version. Some TWRP builds are version-specific.
  • After TWRP is installed, immediately make a full Nandroid backup to an external SD card or USB OTG drive. This can save you later.
  • Keep the original TWRP .tar file in a safe place – you may need to reflash it after a stock firmware update.
  • If your device has a locked bootloader (common on US carrier models), you may need to unlock it via a paid service or it may be impossible. Research your exact model before attempting.
  • Use Odin version 3.14 or newer for most modern Notes. Older versions may not work with newer firmware partitions.

Troubleshooting

  • Odin says “FAIL!” or “Custom binary blocked”. This usually means OEM Unlock wasn’t enabled or the bootloader is locked. Go back to Settings, enable OEM Unlock, and try again. If it’s a carrier-locked model, you may need to contact the carrier or use a paid unlock service.
  • Odin doesn’t detect the phone. Reinstall Samsung USB drivers, try a different USB port (preferably USB 2.0), or try a different cable. Also ensure the phone is in Download Mode, not just plugged in.
  • Phone boots to a black screen or boot loop. Don’t panic. Reboot into Download Mode (Volume Down + Power) and reflash the stock firmware via Odin to restore your device, then try again with the correct TWRP file.
  • TWRP disappears after a reboot. This happens when the phone boots normally once. Reflash TWRP and this time boot directly into recovery. If it still disappears, your device may have a “dm-verity” or “vaultkeeper” feature that re-flashes stock recovery – you’ll need to disable it via a modified kernel or a “no-verity” patch.
  • Touchscreen doesn’t work in TWRP. This can happen with a mismatched TWRP version. Try an older or newer build for your exact model.
  • “Failed to mount /data” error in TWRP. This is common after a first install. Go to Wipe > Format Data, type “yes”, and reboot to recovery. This will erase your internal storage, so back up first.

Frequently Asked Questions

Will installing TWRP void my warranty?

Yes, in most cases it will trip Knox and void your warranty. You can often reflash stock firmware to restore the warranty, but the Knox fuse is permanently blown.

Can I install TWRP without a PC?

No, you need Odin on a PC for the initial install. After that, you can update TWRP from within the app or via a flashable zip.

What’s the difference between TWRP and the stock recovery?

TWRP is a custom recovery with a touch interface, backup/restore, and the ability to flash unsigned zips. The stock recovery can only install official updates.

Will TWRP brick my phone?

Only if you flash the wrong file for your model. If you follow the steps correctly, the risk is low. Always double-check the model number.

Can I uninstall TWRP later?

Yes, you can flash the stock recovery back using Odin, or flash a stock firmware package. This will remove TWRP but may not restore warranty if Knox is tripped.

Do I need root to use TWRP?

No, TWRP is separate from root. You can use it to flash root (like Magisk) or just for backups. But many custom ROMs require root or at least an unlocked bootloader.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →