sodcalculator

10 Tech How-To

Kali NetHunter on MediaTek: Install Guide

Guide 10-49316 · Updated · Step by step

This guide walks you through installing Kali NetHunter on a MediaTek-powered Android device. NetHunter is a mobile penetration-testing platform that layers Kali Linux tools onto your existing Android system, giving you a portable security toolkit. You’ll need a compatible device, an unlocked bootloader, and a willingness to follow each step carefully—this process wipes your device and carries a risk of bricking it.

What You’ll Need

  • A MediaTek Android device with an unlocked bootloader (check your specific model on the NetHunter supported devices list).
  • A Windows, Linux, or macOS computer with USB drivers installed for your device.
  • ADB and Fastboot tools installed on your computer (platform-tools from the Android developer site).
  • The NetHunter installer script or a custom recovery like TWRP (Team Win Recovery Project) for your exact device model.
  • A USB cable and a fully charged battery (at least 80%).
  • Backup of all important data—this process erases everything.

Step-by-Step

  1. Verify device compatibility. Visit the official NetHunter wiki and confirm your exact MediaTek model is listed. If it’s not there, stop—the installer may not support your chipset or kernel.
  2. Unlock the bootloader. On most MediaTek devices, go to Settings > Developer Options and enable OEM unlocking. Then connect your phone to the computer, reboot to fastboot (usually Volume Down + Power), and run fastboot oem unlock or fastboot flashing unlock. Confirm on the phone screen. This wipes your data.
  3. Install a custom recovery. Download the TWRP image for your exact device model. Reboot to fastboot again and run fastboot flash recovery twrp.img, then fastboot reboot recovery. If you get a ‘no such partition’ error, try fastboot boot twrp.img to boot TWRP temporarily instead.
  4. Back up your current ROM. In TWRP, tap Backup, select System, Data, and Boot, and swipe to back up to your SD card or OTG drive. This is your safety net if something goes wrong.
  5. Download the NetHunter installer. From the official NetHunter downloads page, get the nethunter-generic-arm64 zip (or the device-specific build if one exists). Also grab the corresponding nethunter-kali zip if the installer asks for it.
  6. Transfer the zip files. With TWRP still open, connect your phone to the computer and copy the NetHunter zip(s) to the internal storage or SD card. Disconnect when done.
  7. Install NetHunter. In TWRP, tap Install, select the NetHunter zip, and swipe to confirm. The installer will ask whether you want to install the Kali rootfs, the NetHunter app, and custom kernel—select all if available. Wait for the process to finish (it can take 5–10 minutes).
  8. Wipe cache and dalvik. After the zip installs, go to Wipe > Advanced Wipe, select Dalvik/ART Cache and Cache, and swipe to wipe. Do not wipe Data unless you want a completely fresh start.
  9. Reboot and set up. Tap Reboot > System. The first boot may take longer than usual. Once booted, open the NetHunter app, grant it root access (you’ll need Magisk or SuperSU installed beforehand), and let it finish the initial setup.
  10. Verify installation. In the NetHunter app, check the ‘NetHunter Status’ section. It should show ‘Kali Chroot: Installed’ and ‘NetHunter App: Installed’. Open a terminal in the app and run nethunter to enter the Kali environment.

Common Mistakes

  • Skipping the backup. Many users jump straight to flashing and lose all data. Always back up in TWRP first.
  • Using the wrong TWRP. A recovery built for a different MediaTek variant can cause a bootloop. Double-check the exact model number (e.g., MT6765 vs MT6768).
  • Not unlocking the bootloader. Flashing TWRP will fail silently if the bootloader is still locked. Verify with fastboot getvar unlocked—it should say ‘yes’.
  • Ignoring kernel requirements. NetHunter needs a custom kernel with HID and USB gadget support. If the installer doesn’t include one for your device, many features won’t work.
  • Forgetting to enable USB debugging. Without it, ADB won’t see your device. Go to Settings > About Phone and tap Build Number 7 times, then enable USB debugging in Developer Options.

Tips

  • Use a dedicated USB port on your computer, not a hub, to avoid connection drops during flashing.
  • Keep the NetHunter installer zip on your SD card, not just internal storage, in case you need to reflash from recovery.
  • Install Magisk before NetHunter if you want root access—NetHunter’s installer can detect it and integrate properly.
  • Test your setup with a simple command like nmap -sn 192.168.1.0/24 in the NetHunter terminal to confirm the chroot works.
  • For wireless attacks, you’ll need an external USB Wi-Fi adapter that supports monitor mode; the built-in chip usually won’t.

Troubleshooting

  • Device stuck in bootloop. Boot back into TWRP (Volume Up + Power), restore the backup you made earlier, and try a different NetHunter build or kernel.
  • Fastboot doesn’t see the device. Install or update the MediaTek USB drivers on your computer. On Windows, use Device Manager to manually point to the driver folder.
  • NetHunter app says ‘Kali Chroot: Not Installed’. Re-run the installer zip and make sure the ‘Kali rootfs’ option is selected. Alternatively, download the rootfs separately and place it in /sdcard/nh_files before reinstalling.
  • Wi-Fi or Bluetooth stops working after install. This usually means the custom kernel is incompatible. Reflash your stock boot.img from the backup, then reinstall NetHunter with the ‘kernel’ option unchecked.
  • ADB device shows as ‘unauthorized’. On your phone, accept the RSA fingerprint prompt when you connect via USB. If it doesn’t appear, revoke USB debugging authorizations in Developer Options and reconnect.
  • Installer aborts with ‘Error 7’. This usually means the zip is for a different device. Download the correct build for your exact model and try again.

Frequently Asked Questions

Will this work on any MediaTek phone?

No. Only devices with a custom kernel or an officially supported build will work. Check the NetHunter wiki for your exact model before starting.

Do I need to be rooted before installing NetHunter?

Yes. NetHunter requires root access. Install Magisk or SuperSU after unlocking the bootloader and before running the NetHunter installer.

Can I keep my existing Android apps and data?

Unlocking the bootloader wipes your device. After that, you can restore from a backup, but the NetHunter installation itself doesn’t delete your apps—it adds a chroot environment alongside them.

Is it safe to use NetHunter on my daily driver?

It can be, but it’s risky. A failed kernel flash can brick the device or cause instability. It’s best to use a dedicated test device.

How do I uninstall NetHunter?

Boot into TWRP, restore your backup from before the install, or flash your stock ROM via fastboot. That removes the custom kernel and chroot completely.

Why can’t I put my Wi-Fi card into monitor mode?

The internal Wi-Fi chip on most phones doesn’t support monitor mode. You need an external USB adapter that supports it, and NetHunter must have the proper drivers built into the kernel.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →