This guide walks you through installing Windows 11 as a virtual machine in VMware Workstation Player. You’ll create a new VM, attach the Windows 11 ISO, and configure the required settings (TPM, Secure Boot, RAM, disk) so the installer runs without errors. You’ll need a Windows 11 ISO file and VMware Workstation Player installed (the free version works fine).
What You’ll Need
- VMware Workstation Player (free version, version 16 or later recommended)
- Windows 11 ISO file (download from Microsoft’s official website)
- A PC with hardware virtualization enabled (Intel VT-x or AMD-V) — check BIOS/UEFI if unsure
- At least 8 GB of RAM on the host (4 GB for the VM is minimum)
- At least 64 GB of free disk space (VM disk size can be set smaller, but Windows 11 needs ~64 GB)
Step-by-Step
- Download Windows 11 ISO – Go to Microsoft’s Windows 11 download page and choose “Download Windows 11 Disk Image (ISO)”. Select Windows 11 (multi-edition ISO) and choose your language. Save the ISO to a folder you can easily find.
- Open VMware Workstation Player – Launch the application. If you see the home screen, click “Create a New Virtual Machine”. If you already have a VM open, go to Player > File > New Virtual Machine.
- Select the ISO – In the New Virtual Machine Wizard, choose “Installer disc image file (iso)” and browse to the Windows 11 ISO you downloaded. Click Next.
- Enter Windows product key (optional) – If you have a Windows 11 key, enter it. If not, leave blank (you can enter it later). Click Next.
- Choose the guest operating system – The wizard should auto-detect “Microsoft Windows” and “Windows 10 x64” (or similar). If it doesn’t, manually select “Microsoft Windows” and then “Windows 10 x64” – Windows 11 is not listed separately, but the 64-bit Windows 10 option works. Click Next.
- Name the VM and choose location – Give the VM a name like “Windows 11” and choose where to store it (default is fine). Click Next.
- Set disk size – Specify the maximum disk size (default is 60 GB, which is fine). Choose whether to store the virtual disk as a single file or split into multiple files (single file is slightly faster, but split is more portable). Click Next.
- Customize hardware (important for Windows 11) – Before finishing, click “Customize Hardware”. This is where you must enable TPM and Secure Boot, otherwise Windows 11 will refuse to install.
- Add TPM – In the Hardware window, click “Add” at the bottom. Choose “Trusted Platform Module” and click Finish. VMware Player will create a virtual TPM 2.0 chip. (If this option is grayed out, your host may not support it – see Troubleshooting.)
- Enable Secure Boot – Still in the Hardware window, select “Virtualize Intel VT-x/EPT or AMD-V/RVI” (this is for virtualization, not Secure Boot). To enable Secure Boot, you need to edit the VM’s .vmx file after creation. For now, close the Hardware window and click Finish to create the VM.
- Edit the .vmx file – After the VM is created, go to the folder where you stored it (e.g., Documents\Virtual Machines\Windows 11). Open the .vmx file with Notepad. Add the following lines at the end:
firmware = "efi"secureBoot = "TRUE"
Save the file. (If you don’t do this, Windows 11 installer will complain about Secure Boot.) - Start the VM – In VMware Player, select the VM and click “Play virtual machine”. The Windows 11 setup will begin.
- Install Windows 11 – Follow the on-screen prompts. When asked for a product key, you can click “I don’t have a product key” if you skipped it earlier. Choose the edition (Windows 11 Home or Pro) and accept the license terms. When asked about installation type, select “Custom: Install Windows only (advanced)”.
- Partition the disk – You’ll see unallocated space. Select it and click Next. Windows will create the necessary partitions automatically. The installation will copy files and reboot several times.
- Complete setup – After the final reboot, you’ll go through the Windows Out-of-Box Experience (OOBE): choose region, keyboard layout, sign in with a Microsoft account (or create a local account if you prefer), set up PIN, etc. Once done, you’ll be at the Windows 11 desktop.
Common Mistakes
- Forgetting to enable TPM – Windows 11 requires TPM 2.0. If you skip adding the virtual TPM, you’ll get the error “This PC can’t run Windows 11”.
- Not setting firmware to EFI – The default firmware is BIOS, but Windows 11 requires UEFI. You must edit the .vmx file to set firmware = “efi”.
- Not enabling Secure Boot – Even with UEFI, Secure Boot is required. Add secureBoot = “TRUE” to the .vmx file.
- Using a 32-bit Windows 10 VM template – Windows 11 is 64-bit only. Make sure the VM is set to “Windows 10 x64”.
- Allocating too little RAM – Windows 11 needs at least 4 GB. If you give less, the installer may be extremely slow or fail.
- Not enabling hardware virtualization in BIOS – If the host has VT-x/AMD-V disabled, VMware won’t run 64-bit VMs properly. Enable it in BIOS/UEFI.
Tips
- Use the “Easy Install” feature – VMware can auto-install Windows with a product key, but it’s often easier to do a manual install to avoid issues.
- Allocate at least 8 GB RAM to the VM if your host has 16 GB or more. This makes Windows 11 much more responsive.
- Enable 3D acceleration in the VM settings (under Display) if you plan to use graphics-heavy apps.
- Take a snapshot after installation and Windows updates – this lets you revert if something goes wrong later.
- Install VMware Tools after Windows boots – it improves mouse integration, clipboard sharing, and display resolution.
- If you want to skip the Microsoft account during setup, disconnect the network (or use the command
shift+F10and typeoobe\bypassnro) to create a local account.
Troubleshooting
- Error: “This PC can’t run Windows 11” – This is almost always due to missing TPM or Secure Boot. Double-check that you added the TPM device and that the .vmx file has the correct lines. Also ensure the VM is using EFI firmware.
- TPM option is grayed out in VMware – This usually means your host CPU doesn’t support virtualization or it’s disabled in BIOS. Enable Intel VT-x/AMD-V in your BIOS/UEFI settings. Also, VMware Player 16 and later support TPM; if you have an older version, update it.
- VM won’t boot from ISO – Make sure the ISO is attached in the CD/DVD drive settings. You can also press Esc during boot to select the boot device manually.
- Installation freezes or is very slow – Increase the RAM allocated to the VM (at least 4 GB) and ensure the host has enough free resources. Also, check that hardware virtualization is enabled.
- Secure Boot error after editing .vmx – If you get “Secure Boot is not supported” when starting the VM, you may have added the lines incorrectly. Open the .vmx file and verify the lines are exactly
firmware = "efi"andsecureBoot = "TRUE"(note the quotes and capitalization). - No network in the VM – After installation, if there’s no network, install VMware Tools and check the network adapter settings (NAT is usually fine).
Frequently Asked Questions
Can I install Windows 11 in VMware Player for free?
Yes, VMware Workstation Player is free for personal use, and Windows 11 can be installed without a license (you’ll get a watermark and limited personalization until you activate).
Does Windows 11 run well in VMware Player?
Yes, with at least 4 GB RAM and 2 CPU cores, Windows 11 runs smoothly for everyday tasks. For gaming or heavy apps, you may need more resources.
Why does Windows 11 installer say my PC doesn’t meet requirements?
This is because the VM lacks TPM 2.0 or Secure Boot. Follow the steps to add the TPM device and edit the .vmx file to enable EFI and Secure Boot.
Can I use an existing Windows 10 virtual machine to upgrade to Windows 11?
You can, but it’s easier to create a new VM with the correct settings. If you want to upgrade, you’ll need to add TPM and change firmware, which may be complicated.
How much disk space does Windows 11 need in a VM?
Windows 11 requires about 64 GB of free space. The default 60 GB is tight; set it to 80 GB or more if you plan to install many apps.
Can I install Windows 11 without a Microsoft account?
Yes. During setup, when asked to sign in, click “Domain join instead” or use the oobe\bypassnro trick to create a local account. Note that Windows 11 Home may require an internet connection for initial setup.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- Fix Slow Internet Lag on Samsung Galaxy Note
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step