sodcalculator

10 Tech How-To

How to Join a Verizon Fios Wi-Fi Network: Find SSID & Password

Guide 10-50492 · Updated · Step by step

This guide shows you how to connect your device to a Verizon Fios home Wi-Fi network, including how to locate the network name (SSID) and password. You’ll find the credentials on the router label, in the My Fios app, or through the router’s web interface. No special tools are needed, just access to the router or your Verizon account.

What You’ll Need

  • Your Verizon Fios router (the device that provides Wi-Fi)
  • A device to connect (phone, laptop, tablet, etc.)
  • If using the app or web portal: your Verizon username and password
  • If using the router label: nothing else

Step-by-Step

  1. Locate the router label. Look on the back, bottom, or side of your Verizon Fios router. You’ll see a sticker with the default Wi-Fi network name (often labeled “Network Name” or “SSID”) and the Wi-Fi password (sometimes called “WPA2 Key” or “Password”). This is the fastest way if the router hasn’t been customized.
  2. Check the My Fios app (if you have it). Open the My Fios app on your smartphone and sign in with your Verizon account. Go to the “Internet” or “Wi-Fi” section. You’ll see your current network name and password there. If you don’t have the app, you can also log in at verizon.com/myfios on a web browser.
  3. Access the router’s web interface (if the label is unreadable or changed). Connect a device to the router via an Ethernet cable or use the default Wi-Fi from the label. Open a web browser and go to 192.168.1.1 (the common Fios router address). Log in with the admin username and password (often printed on the label too, or “admin” and “password” for older models). Then find the “Wi-Fi” or “Wireless” settings tab to view the SSID and password.
  4. Connect your device to the Wi-Fi. On your phone, laptop, or tablet, open the Wi-Fi settings. Find the network name (SSID) you saw in step 1, 2, or 3. Tap or click it, then enter the password exactly as shown (case-sensitive). Click “Connect” or “Join.”
  5. For a guest network (optional). If you want to connect a visitor, many Fios routers have a separate guest network with its own SSID and password. You’ll find those credentials on the same label or in the router settings, usually under “Guest Wi-Fi.”
  6. If you changed the password and forgot it. You can reset the router to factory defaults by pressing and holding the reset button (usually a small pinhole) for about 10 seconds with a paperclip. This will restore the default SSID and password from the label. Note: this also resets any custom settings.

Common Mistakes

  • Typing the password with extra spaces or wrong capitalization. Wi-Fi passwords are case-sensitive. Copy-paste when possible.
  • Confusing the router’s admin login with the Wi-Fi password. The admin password is for the router settings page, not for connecting to Wi-Fi.
  • Looking at the wrong label. Some routers have multiple labels; make sure you’re reading the one that says “Wi-Fi” or “SSID,” not the serial number or MAC address.
  • Using the default SSID that was changed. If you or someone else changed the network name, the label won’t match. Use the app or web interface to see the current name.
  • Forgetting to press Enter after typing the password. On some devices, you need to tap “Join” or “Connect” after entering the password.

Tips

  • Write down your Wi-Fi credentials in a safe place, or use a password manager, so you don’t have to look them up again.
  • Use the My Fios app to change your Wi-Fi password to something you’ll remember. It also lets you share the password with guests easily.
  • If you have a dual-band router (2.4 GHz and 5 GHz), you may see two network names. Connect to the 5 GHz for faster speeds if you’re close to the router; use 2.4 GHz for better range.
  • When entering the password on a TV or game console, use the on-screen keyboard carefully—it’s easy to mistype.
  • Keep the router label intact—it’s your backup if you forget the admin login.

Troubleshooting

  • Can’t find the network name in your device’s list? Make sure the router is powered on and the Wi-Fi light is solid (not blinking). Move closer to the router. If it’s still not visible, restart the router by unplugging it for 30 seconds and plugging it back in.
  • Password not accepted? Double-check that you’re entering the correct password for the correct network (e.g., don’t use the guest password for the main network). If you’ve changed it recently, try the new one. If you’re unsure, reset the router to factory defaults.
  • Can’t log into the router web interface? Try a different browser or clear your cache. The default IP might be different (check the label). If you’ve forgotten the admin password, you’ll need to reset the router.
  • My Fios app shows a different network name than the label? That’s normal if the network was customized. Use the app’s name and password.
  • Guest network not working? Check that guest Wi-Fi is enabled in the router settings. Some routers have a separate toggle for it.
  • Still can’t connect? Try connecting a device via Ethernet cable to the router. If that works, the issue is Wi-Fi-specific. If not, the router may need a reset or replacement—contact Verizon support.

Frequently Asked Questions

  1. Where is the Wi-Fi password on a Verizon Fios router? It’s on a sticker on the back or bottom of the router, labeled as “WPA2 Key” or “Password.” You can also find it in the My Fios app or router settings.
  2. What is the default Verizon Fios Wi-Fi password? It’s unique to each router and printed on the label. There is no universal default; it’s a random string of letters and numbers.
  3. How do I change my Fios Wi-Fi password? Use the My Fios app or go to the router’s web interface at 192.168.1.1, log in, and find the Wi-Fi settings. Enter a new password and save.
  4. Can I connect to Fios Wi-Fi without the password? No, the password is required for security. However, if you have a WPS button on the router, you can press it and then press WPS on your device to connect without typing the password (if your device supports it).
  5. Why does my Fios Wi-Fi have two networks? Many Fios routers broadcast both 2.4 GHz and 5 GHz bands. They may have the same name or different names. Connect to the one that works best for your device.
  6. How do I find the SSID if the label is worn off? Use the My Fios app or log into the router’s web interface. You can also connect via Ethernet and look at the settings.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →