This guide shows you how to rename Bluetooth devices on your iPhone or iPad, so you can easily tell your headphones, speaker, or car kit apart from other devices. You’ll learn the built-in method that works for most Bluetooth accessories, plus a trick for devices that don’t allow renaming. You only need your iPhone or iPad and the Bluetooth device you want to label.
What You’ll Need
- iPhone or iPad with iOS 13 or later (the steps are the same on all recent versions)
- The Bluetooth device you want to rename (it should be within range and powered on)
- The device should already be paired with your iPhone or iPad
Step-by-Step
- Open Settings. Tap the gray gear icon on your Home Screen or in your App Library.
- Tap Bluetooth. It’s near the top of the Settings list, next to a blue Bluetooth icon.
- Make sure Bluetooth is on. The toggle at the top should be green. If it’s not, tap it to turn it on.
- Find your device in the list. Scroll down to the “My Devices” section. You’ll see all the Bluetooth devices you’ve paired with this iPhone or iPad. The device you want to rename should appear here.
- Tap the info (i) button. It’s a small blue circle with an “i” inside, located to the right of the device name. This opens the device’s settings page.
- Tap the current name. On the device settings page, you’ll see the device’s name at the top, next to a small Bluetooth icon. Tap on the name text itself.
- Type the new name. A text field will appear with the current name highlighted. Type the new label you want, like “My Headphones” or “Car Audio.”
- Tap Done on the keyboard. The keyboard’s Done button is in the bottom-right corner (or top-right on iPad). This saves the new name.
- Tap the back arrow. Go back to the Bluetooth settings list. You should now see your device listed with the new name.
Common Mistakes
- Not seeing the info (i) button. If you don’t see an “i” button next to your device, it’s likely not a Bluetooth device that supports renaming. Some devices, especially older ones or those that use a proprietary connection, don’t allow this.
- Renaming the wrong device. If you have two identical devices, make sure you tap the correct one in the list. The name shown is the name the device itself broadcasts, which might be similar for both.
- Forgetting to tap Done. If you just type the new name and then tap elsewhere, the change might not be saved. Always tap the Done key on the keyboard.
- Renaming while the device is off. If the device is powered off, it might not appear in the list, or the name change might not stick. Turn it on and make sure it’s connected before renaming.
Tips
- Use descriptive names. Instead of “Headphones,” try “Gym Headphones” or “Work Headphones” if you have multiple pairs.
- Include location. For devices you move around, add a location like “Living Room Speaker” or “Bedroom Speaker.”
- Rename from the device itself. Some Bluetooth devices (like certain earbuds) have their own companion app that lets you rename them. Check the manufacturer’s app for more options.
- The name change is local. The new name is stored on your iPhone or iPad, not on the device itself. This means if you pair the device with another phone, it will show its original name there.
- Forget and re-pair if stuck. If the name doesn’t change, try “Forget This Device” and then pair it again. After re-pairing, the rename option will be available.
Troubleshooting
The device doesn’t appear in My Devices. Make sure the device is powered on and within range. If it’s not listed, try turning Bluetooth off and on again, or restarting your iPhone/iPad. If it still doesn’t show, you may need to pair it again.
The rename option is grayed out or missing. This usually means the device doesn’t support renaming. Some devices, especially those that use Apple’s W1 or H1 chip (like AirPods) have their own naming method. For AirPods, go to Settings > Bluetooth, tap the “i” next to them, and tap “Name” to change it. For other devices, you may need to use the manufacturer’s app.
The name reverts to the old one. This can happen if the device’s firmware resets the name, or if you haven’t updated the name on the device itself. Try renaming again, and make sure you tap Done. If it keeps reverting, try forgetting the device and pairing it again.
I renamed the device, but it shows the old name on other devices. As mentioned, the rename is local to your iPhone/iPad. If you want the name to change everywhere, you need to rename it on the device itself (if it supports that) or use the companion app.
Frequently Asked Questions
Can I rename any Bluetooth device on my iPhone?
No, not all devices allow renaming. Most headphones, speakers, and car kits do, but some simple devices like keyboards or mice may not show the rename option. If you don’t see the info (i) button, the device likely doesn’t support it.
Will renaming affect the connection?
No, renaming only changes the label. It does not affect the Bluetooth connection or the device’s performance.
Can I use emojis in the device name?
Yes, you can use emojis and other special characters when renaming a Bluetooth device. Just type them in the text field.
Why does my iPhone show the old name after I renamed it?
Sometimes the Bluetooth cache needs to refresh. Try turning Bluetooth off and on again, or restarting your iPhone. If that doesn’t work, forget the device and pair it again.
Does renaming a device on my iPhone change it on my iPad too?
No, the rename is per-device. If you have both an iPhone and an iPad, you’ll need to rename the device separately on each one.
Can I rename AirPods the same way?
Yes, AirPods can be renamed in the same Settings > Bluetooth > (i) > Name path. You can also change the name in the AirPods settings under Settings > Bluetooth > (i) > Name.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Turn Off Shutter Sound on iPhone
- VPN Setup on iPhone SE: Step-by-Step Guide
- Fix Internet Not Working on Windows 11
- Fix Right Click Not Working in Firefox
- Compare Two Columns with Comma Separated Values in Excel
- How to Limit Ad Tracking on iPhone Apps