If your iPhone’s flashlight is too blinding at night, you can reduce its brightness. This guide shows you how to adjust the flashlight intensity on modern iPhones (models with Face ID, iOS 16 or later) and what to do if the controls don’t appear.
What You’ll Need
- An iPhone with Face ID (iPhone X or newer) – the flashlight brightness slider only works on these models.
- iOS 16 or later – older versions don’t have the brightness slider.
Step-by-Step
- Open Control Center. On an iPhone with Face ID, swipe down from the top-right corner of the screen. (On an iPhone with a Home button, swipe up from the bottom edge – but note that the flashlight slider is not available on those models.)
- Locate the Flashlight icon. It looks like a small flashlight and is usually in the top-left of the Control Center grid.
- Press and hold the Flashlight icon. Do not just tap it – that turns the flashlight on/off. Press and hold until a large slider appears.
- Drag the slider down. The slider goes from low (bottom) to high (top). Drag it to the level you want – the flashlight will turn on as soon as you start dragging, so you can see the effect in real time.
- Release to set. Once you’re happy with the brightness, lift your finger. The flashlight stays on at that level.
- Turn off the flashlight. To switch it off, tap the Flashlight icon once in Control Center, or use the lock screen flashlight button if you have it enabled.
Common Mistakes
- Tapping instead of pressing and holding. A simple tap only toggles the flashlight on/off – you must press and hold to see the brightness slider.
- Looking for the slider on older iPhones. If you have an iPhone with a Home button (like iPhone SE 2nd/3rd gen, iPhone 8 or earlier), the slider doesn’t exist. There’s no built-in way to adjust brightness on those models.
- Dragging the slider too quickly. The flashlight brightness updates live, but if you drag super fast, you might overshoot the level you wanted. Drag slowly and watch the light.
- Expecting the flashlight to remember your setting. The flashlight always turns on at full brightness when you tap the icon. You must adjust it each time you turn it on.
Tips
- Use the lock screen flashlight shortcut. If you have the flashlight button on your lock screen (Settings > Control Center > turn on “Flashlight”), you can press and hold it to adjust brightness from there too – no need to open Control Center.
- Set a custom brightness level. There’s no way to set a default brightness – you’ll always start at full. But you can quickly slide it down to your preferred level each time.
- Use the camera flash as a dimmer alternative. If you need a very dim light, try using the camera app with the flash set to “On” – it’s not as bright as the flashlight.
- Consider a third-party app. Some apps like “Flashlight” or “Torch” let you set a custom brightness level and even a strobe effect. They use the same LED, but they can remember your setting.
Troubleshooting
- The slider doesn’t appear when I press and hold. Make sure you’re pressing and holding the flashlight icon, not just tapping. If it still doesn’t appear, your iPhone may not support it (iPhone 8 or earlier) or your iOS is too old. Update to iOS 16 or later if possible.
- Flashlight is not turning on at all. This can happen if the LED is too hot (after prolonged use) or if there’s a hardware issue. Try turning it off and waiting a few minutes. If it still doesn’t work, restart your iPhone. If the problem persists, contact Apple Support.
- Brightness changes but then resets to full. That’s normal – the flashlight always starts at full when you turn it on. You have to adjust it each time.
- Control Center doesn’t open. Make sure you’re swiping from the very top-right corner. If you have an app open, you might need to swipe down from the top-right edge of the screen (not the center).
Frequently Asked Questions
Can I make the flashlight dimmer than the lowest slider setting?
No, the built-in slider only goes so low. If you need a very dim light, you can cover the LED with your finger or use a third-party app that might offer a lower minimum.
Does the flashlight brightness setting stay the same after I turn it off and on?
No, it always resets to full brightness. You need to adjust it each time you turn on the flashlight.
Why don’t I see the flashlight brightness slider on my iPhone?
The slider is only available on iPhone models with Face ID (iPhone X and later) running iOS 16 or later. If you have an older model or an older iOS, you won’t see it.
Can I adjust the flashlight brightness from the lock screen?
Yes, if you have the flashlight button on your lock screen, press and hold it to bring up the same brightness slider.
Does changing the brightness affect battery life?
Yes, a lower brightness uses less power, so the flashlight will drain your battery slower.
Is there a way to set a default brightness for the flashlight?
No, Apple doesn’t offer a default brightness setting. You’ll have to adjust it each time you use the flashlight.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Spotify Jam Not Working on Mobile? Fixes That Work
- Windows 10 No Internet Secured WiFi Error Fix
- Multi-Cloud GPU Failover Design Guide
- Error Code Currant Destiny? Meaning & Fixes
- AirPlay with Roku Multi-Device Setup: A How-To
- How to Set a Timer on iPhone (iOS 18 & 17)