This guide shows you how to make your Apple Watch play a sound and vibrate so you can find it, using only your iPhone. This is the standard way to locate a misplaced watch, and it works when the watch is connected to your iPhone via Bluetooth or on the same Wi-Fi network. You’ll need your iPhone with the Watch app installed and your Apple Watch nearby.
What You’ll Need
- Your iPhone (with iOS 16 or later, though the steps work on earlier versions too).
- Your Apple Watch (any model, running watchOS 9 or later).
- Both devices should have Bluetooth enabled, and ideally be on the same Wi-Fi network for the ping to work reliably.
Step-by-Step
- Unlock your iPhone. Make sure the screen is on and you’re at the Home Screen or any app.
- Open the Watch app. This is the app with a black icon featuring a white outline of a watch face. It’s usually on your first Home Screen page.
- Tap the “My Watch” tab. This is the bottom-left icon in the Watch app. It looks like a watch face.
- Scroll down and tap “Find My Watch”. This option is near the bottom of the list, under the “Find My” section. It has a green radar-like icon.
- Tap “Play Sound”. This is a large green button at the top of the screen. Your Apple Watch will immediately start playing a loud, high-pitched chime and vibrate continuously.
- Follow the sound. The watch will keep pinging for about 30 seconds, or until you stop it. Move around your home or office to locate it.
- Stop the sound. Once you find the watch, tap “Dismiss” on your iPhone, or press the side button or Digital Crown on the watch itself. The sound stops immediately.
Common Mistakes
- Watch is in Airplane Mode. If your watch is in Airplane Mode, it won’t connect to your iPhone, and the “Play Sound” button will be grayed out.
- Watch is out of Bluetooth range. The ping usually works over Bluetooth, which has a range of about 30 feet (10 meters). If you’re farther away, the feature may not work unless both devices are on the same Wi-Fi network.
- Watch is powered off. If the watch battery is completely dead or the watch is off, it cannot receive the ping.
- You’re looking in the wrong app. The “Find My” app on your iPhone is for locating your devices on a map, not for playing a sound on your watch. You must use the Watch app.
Tips
- Use the Control Center shortcut. On your Apple Watch, swipe up from the bottom of the watch face to open Control Center, then tap the phone icon. This makes your iPhone ring instead. To make your watch ring, you need the Watch app on your iPhone.
- Enable “Ping Apple Watch” in Control Center on iPhone. You can add a shortcut to your iPhone’s Control Center that goes directly to the “Play Sound” button. Go to Settings > Control Center, then tap the green plus next to “Ping Apple Watch”. Then, swipe down from the top-right of your iPhone screen, tap the watch icon, and it will immediately ping your watch.
- Keep your watch charged. A watch with less than 10% battery may still ping, but it’s less reliable. Charge it regularly to avoid the situation.
- If the watch is on silent, it still rings. The ping overrides the silent mode, so you’ll hear it even if your watch is muted.
Troubleshooting
“Play Sound” is grayed out. This means your watch isn’t connected to your iPhone. Try the following:
- Bring your iPhone and watch closer together.
- Turn Bluetooth off and on again on your iPhone (Settings > Bluetooth).
- Restart both devices: press and hold the side button on your watch to power it off, then turn it back on. For iPhone, press and hold the side button and volume up, then slide to power off.
The sound plays but you can’t hear it. The ping is loud, but if the watch is under a pillow or in a drawer, it might be muffled. Try calling your watch using the “Ping Apple Watch” Control Center shortcut repeatedly, or use the Find My app to see its last known location on a map.
The watch is not in the list of devices in the Watch app. This indicates your watch is unpaired. Open the Watch app, tap “All Watches” at the top, and see if your watch appears. If not, you’ll need to pair it again.
You get a “No Location Found” message. This is normal if the watch hasn’t reported its location recently. The “Play Sound” feature still works as long as the watch is connected via Bluetooth or Wi-Fi.
Frequently Asked Questions
Does the ping work if my watch is on silent?
Yes, the ping overrides silent mode. Your watch will play the chime and vibrate even if it’s set to silent.
Can I make my watch ring from my iPhone if it’s in another city?
No, the ping requires a Bluetooth or Wi-Fi connection. If your watch is out of Bluetooth range and not on the same Wi-Fi network, you can’t make it ring. You can, however, use the Find My app to see its last known location on a map.
How long does the sound play?
The sound plays for about 30 seconds, or until you stop it by tapping “Dismiss” on your iPhone or pressing the side button or Digital Crown on the watch.
Why is the “Play Sound” button grayed out?
This means your watch is not connected to your iPhone. Check that Bluetooth is on, both devices are within range, and your watch is not in Airplane Mode.
Can I use this feature to find my iPhone from my watch?
Yes, the reverse is true. On your Apple Watch, swipe up to open Control Center and tap the phone icon. This makes your iPhone ring, even if it’s on silent.
Does this work with Apple Watch SE or older models?
Yes, the “Play Sound” feature is available on all Apple Watch models, including the original, SE, and Ultra. The steps are the same.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Google Photos Backup Stuck? Fixes That Work
- Record Your Own Alarm Sound on Android
- Transfer Music from ZTE to iPhone: Full Guide
- Angel Investor vs Venture Capitalist: Key Differences
- Sync Apps Between Android Devices Using Google Play
- Find What Drains Your iPhone Battery Fast