Google Maps lets you measure the straight-line distance between any two points, or the exact distance along a road, trail, or custom path. You can do this on both the desktop website and the mobile app. This guide covers both methods, so you can get accurate measurements for planning a run, a bike ride, a road trip, or just checking the size of a property.
What You’ll Need
- A device with Google Maps: a computer (any modern browser) or a smartphone/tablet with the Google Maps app installed (iOS or Android).
- An internet connection (the map needs to load).
- For the desktop method: a mouse or trackpad to right-click.
- For the mobile method: your finger or a stylus to tap and drag on the screen.
Step-by-Step
On a Computer (Desktop)
- Open Google Maps in your web browser. Go to
maps.google.com. - Find your starting point. Use the search box to enter an address or place name, or click and drag the map to navigate to the area you want.
- Right-click on the starting point. A context menu will appear. It may look slightly different depending on your browser, but you’re looking for the option that says “Measure distance”. Click it.
- A small black circle will appear at the point you clicked. This is your starting marker. A small pop-up box will also appear at the bottom of the screen showing “Distance: 0” (or similar).
- Click on the map to add your next point. Click anywhere on the map to create a straight line from the starting point to that new point. The distance will update in the pop-up box.
- Add more points to trace a path. To measure a route along roads or a winding path, click at each turn or bend. For example, click at the corner of a street, then click again at the next corner, and so on. Each click adds a new point, and the total distance is calculated cumulatively.
- To measure a straight line (as the crow flies), just click once at your destination. The line will be straight, and the distance shown is the direct distance.
- Adjust a point if you need to. You can click and drag any of the white circular points (or the black starting point) to reposition them. The distance will update automatically.
- Remove a point. Click on the point you want to remove. It will be deleted, and the line will reconnect between the remaining points.
- Finish measuring. When you’re done, the distance is shown in the pop-up box at the bottom of the screen. You can close the measurement by clicking the X in the pop-up box, or by right-clicking and choosing “Clear measurement” (or similar).
On a Smartphone or Tablet (Mobile App)
- Open the Google Maps app on your device.
- Find your starting point. Use the search bar or navigate the map by dragging with your finger.
- Press and hold on the starting point. A red pin will drop, and a menu will appear at the bottom of the screen.
- Tap the name of the location (or the address) in that bottom menu. This opens a new screen with details about that place.
- Scroll down and tap “Measure distance”. You’ll see this option in the list of actions. The map will now show a crosshair icon (a circle with a dot in the middle) and a black circle at the pin’s location.
- Move the crosshair to your next point. Drag the map so the crosshair is over the location you want to measure to. The crosshair is the target you’re aiming at.
- Tap the “Add point” button (the blue plus sign, usually at the bottom right). This locks in that point and draws a line from the previous point.
- Continue adding points. Move the crosshair to the next point and tap “Add point” again. For a straight line, just add one point at your destination.
- See the total distance. The total distance is displayed at the bottom of the screen, next to the “Add point” button. It updates as you move the crosshair.
- Undo a point. Tap the undo arrow (the circular arrow icon) at the top right to remove the last point you added.
- Clear everything. Tap the three dots (menu) at the top right and select “Clear” to start over.
- Finish. When you’re done, tap the back arrow (or the checkmark) at the top left to exit the measuring mode.
Common Mistakes
- Not zooming in enough. If you’re measuring a short distance or a precise path, you need to zoom in to see the exact roads or boundaries. Clicking on a blurred or tiny map can place points in the wrong spot.
- Clicking instead of dragging on mobile. On the mobile app, you must use the crosshair and tap “Add point”. Simply tapping the map will not add a point; it will just move the map.
- Forgetting to add points on curves. If you’re measuring a winding road, you need to click at every turn. If you only click at the start and end, you’ll get a straight line, not the actual road distance.
- Confusing the starting point. The black circle on desktop is the start. If you click on the map and then decide you want to start somewhere else, you need to delete the first point and start over, or drag the black circle to the new location.
- Not clearing the previous measurement. If you measure a distance and then start a new measurement without clearing the old one, the new points will connect to the old ones, giving you a combined distance.
Tips
- Use the ruler for area too. While the measure tool is for distance, you can use it to estimate area by measuring the length and width of a plot and multiplying them.
- Switch units. By default, Google Maps shows distance in miles or kilometers depending on your region. You can change the unit in the settings (on desktop: Settings > Distance units; on mobile: Settings > Distance units).
- Measure a route for a run or bike ride. You can use the measure tool to plan a route by clicking along the streets you intend to take. This gives you a good estimate of the total distance, though it may not be as precise as a dedicated route planner.
- Use the “Measure distance” feature for property lines. You can trace the perimeter of a property to get an approximate linear footage, which is useful for estimating fencing or landscaping needs.
- Save your measurement. On desktop, you can copy the distance from the pop-up box and paste it into a note. On mobile, you can take a screenshot of the measurement before you exit.
Troubleshooting
- The “Measure distance” option is grayed out or not appearing. This usually means you’re not right-clicking on the map itself. Make sure you’re right-clicking on the map area, not on a search result or a place card. If you’re in the mobile app, make sure you’ve dropped a pin first and then tapped the location name.
- My points are not connecting properly. On desktop, if you click and drag, you’ll move the map instead of adding a point. Make sure you’re simply clicking (not dragging) to add a point. On mobile, make sure you’re tapping the “Add point” button, not just tapping the map.
- The distance seems too short or too long. Double-check that you’ve added all the necessary points. For a road route, you need a point at every curve. For a straight line, you only need two points. Also, check that you’re not measuring in the wrong units (e.g., miles vs. kilometers).
- I can’t delete a point on mobile. There is no direct “delete point” button on mobile. You can only undo the last point you added using the undo arrow. To remove a specific point, you’ll need to clear the measurement and start over.
- My measurement disappeared. If you accidentally tapped the back arrow or closed the app, the measurement is gone. You’ll need to start over. On desktop, if you click the “X” on the pop-up, it clears the measurement.
Frequently Asked Questions
Can I measure distance without an internet connection?
No, you need an internet connection to load the map and use the measuring tool. However, if you’ve downloaded offline maps for the area, you may be able to measure within that downloaded area, but it’s not guaranteed to work reliably.
What’s the difference between the distance I measure and the driving distance shown in directions?
The measure tool gives you the distance along the exact path you draw. The directions feature gives you the distance along the actual road network, following one-way streets and turn restrictions. They can be different if you draw a path that doesn’t follow roads or if you take a shortcut.
Can I measure the area of a property with Google Maps?
There’s no direct “measure area” tool in Google Maps. However, you can use the measure distance tool to trace the perimeter and then calculate the area using a separate tool or by breaking the shape into rectangles and triangles. For a simple rectangle, measure the length and width and multiply.
Does the measurement account for elevation changes?
No, the measurement is a 2D distance on the map. It does not account for hills or valleys. If you’re measuring a hiking trail with significant elevation gain, the actual distance you walk will be longer than the measured distance.
Can I measure distance in nautical miles?
Google Maps does not have a built-in nautical miles unit. You can measure in miles or kilometers and then convert. 1 nautical mile is approximately 1.1508 statute miles or 1.852 kilometers.
Why does the distance change when I zoom in or out?
The distance itself doesn’t change, but your ability to place points accurately does. When you zoom in, you can place points more precisely, which can slightly change the total distance, especially on curved paths. It’s always best to zoom in as much as possible when placing points.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone