Windows 10 normally sends all sound to one output device, but you can route audio to multiple devices at once—say, speakers and headphones, or a TV and a Bluetooth speaker. This guide shows you how to set that up using built-in Windows features and a few free tools, no extra hardware required.
What You’ll Need
- A Windows 10 PC (version 1903 or later recommended)
- Two or more audio output devices (speakers, headphones, Bluetooth, HDMI, etc.)
- Administrator rights to install software if you choose the third-party route
Step-by-Step
Method 1: Use the Built-in “Stereo Mix” (for recording and playback)
- Right-click the speaker icon in the system tray and select Sounds.
- Go to the Recording tab. Right-click an empty area and check Show Disabled Devices.
- Look for Stereo Mix (or “What U Hear” on some sound cards). Right-click it and select Enable.
- Right-click Stereo Mix again and choose Properties.
- Go to the Listen tab, check Listen to this device.
- Under Playback through this device, select your second output device (e.g., headphones).
- Click Apply and OK. Now audio from your default device will also play through the second device.
Note: This method sends all system audio to both devices, but you can’t control volume independently for each.
Method 2: Use the “App Volume and Device Preferences” (Windows 10 1903+)
- Press Win + I to open Settings.
- Go to System > Sound.
- Scroll down to Advanced sound options and click App volume and device preferences.
- You’ll see a list of running apps. For each app, there are two dropdowns: Output and Input.
- Set an app’s output to one device (e.g., speakers) and another app’s output to a different device (e.g., headphones).
- This lets different apps use different outputs simultaneously, but it doesn’t send the same app to two devices.
Method 3: Use a Third-Party Tool (e.g., VoiceMeeter, or Windows’s “Sonic” for some laptops)
- Download and install a virtual audio mixer like VoiceMeeter (free version is fine).
- Open VoiceMeeter. In the top-right, set the Hardware Out to your first device (e.g., speakers).
- In the second hardware out slot, select your second device (e.g., headphones).
- In Windows, set your default playback device to VoiceMeeter Input.
- Now all system audio goes into VoiceMeeter, which sends it to both hardware outputs simultaneously.
- Use the sliders in VoiceMeeter to control volume for each output independently.
Common Mistakes
- Not enabling Stereo Mix – It’s often hidden by default; you must right-click and show disabled devices.
- Selecting the wrong “Listen” device – Make sure you pick the device you want as the second output, not the default one.
- Assuming all apps support per-app output – Some older apps ignore the Windows per-app settings and always use the default device.
- Forgetting to set default device after installing VoiceMeeter – If you don’t set VoiceMeeter as default, audio won’t route through it.
- Bluetooth devices with high latency – Bluetooth speakers/headphones often have a noticeable delay, which can cause echo when used with wired speakers.
Tips
- Use the Volume Mixer (right-click speaker icon > Open Volume Mixer) to adjust volume per app even when using multiple outputs.
- If you only need two devices occasionally, consider a physical splitter for headphones and speakers—simpler and no software.
- In VoiceMeeter, you can also add a virtual input to record the combined output.
- For gaming, check if your game has its own audio output settings—some allow choosing a specific device.
- Keep your audio drivers updated, especially for Bluetooth and HDMI devices.
Troubleshooting
- No sound from second device – Check that the device is set as default or selected in the app’s output settings. Also ensure it’s not muted in the Volume Mixer.
- Echo or delay – This is common when mixing Bluetooth and wired devices. Try disabling the Bluetooth device’s microphone, or use a wired second device.
- Stereo Mix option missing – Some sound cards don’t support it. Try updating your audio driver, or use a third-party tool like VoiceMeeter.
- VoiceMeeter not showing up as a device – Restart the application and Windows audio service (run
services.msc, restart “Windows Audio”). - Apps not respecting per-app settings – Right-click the app in the Volume Mixer and make sure it’s not set to “Default” – you can override per app.
- After a Windows update, settings reset – Re-check the Stereo Mix listen settings or re-select VoiceMeeter as default.
Frequently Asked Questions
Can I output to two different apps on two different devices?
Yes, using the per-app output settings in Windows 10 (Method 2) you can set different apps to different devices.
Does this work with Bluetooth and wired devices together?
Yes, but you may experience latency on the Bluetooth device, which can cause echo if both are playing at once.
Will this work for system sounds and notifications?
Yes, system sounds will follow the default device, but if you use VoiceMeeter, all sounds go to both outputs.
Can I control volume for each device separately?
With VoiceMeeter, yes. With Stereo Mix, no—both devices receive the same signal, and you adjust volume via the device’s own controls.
Is there a way to do this without installing any software?
Yes, using Stereo Mix (if your sound card supports it) or the per-app settings (if you only need different apps on different devices).
Why does my second device have no sound when using Stereo Mix?
Make sure the “Listen to this device” checkbox is checked and the correct playback device is selected. Also ensure the second device is not muted and has volume up.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Windows 10 New PC Settings Tweaks
- Flutter vs Android Studio: Key Differences
- VPN on Samsung Galaxy: App & Settings Setup
- How to Assign a Ringtone to a Specific Contact on Android
- How to Send Confetti on iPhone (iMessage Effect)
- iPad Location Not Available? Fix It Now