This guide walks you through pairing Motorola wireless earbuds with an Android phone, an iPhone, and a Windows PC. You’ll learn the exact steps for each device type, how to fix common pairing problems, and tips to keep the connection stable. No special tools are needed—just your earbuds and the device you want to connect.
What You’ll Need
- Your Motorola earbuds (fully charged)
- The charging case (for resetting and re-pairing)
- The device you want to pair: Android phone, iPhone, or Windows PC
- Bluetooth enabled on the device (check your device’s settings)
Step-by-Step
Pairing with Android
- Put the earbuds in pairing mode. Remove both earbuds from the charging case. If they don’t enter pairing mode automatically, press and hold the touch button on both earbuds for about 5 seconds until the LED flashes blue and red (or you hear “pairing”).
- Open Android Bluetooth settings. Swipe down from the top of the screen to open Quick Settings, then tap the Bluetooth icon to turn it on. Or go to Settings > Connected devices > Connection preferences > Bluetooth.
- Start a new pairing. On the Bluetooth settings page, tap “Pair new device” (or the + icon). Your Android will scan for nearby devices.
- Select your Motorola earbuds. Look for the name like “Motorola Buds” or “Moto Buds 065” in the list of available devices. Tap it.
- Confirm the pairing. If a code appears on your phone, confirm it matches the one shown on the earbuds (usually not needed for earbuds). Wait for the “Connected” status. You’ll hear a chime in the earbuds.
Pairing with iPhone (iOS)
- Put the earbuds in pairing mode. Same as with Android: take them out of the case, or press and hold the touch areas for ~5 seconds until the LED flashes.
- Open iPhone Settings > Bluetooth. Make sure Bluetooth is toggled on.
- Wait for the earbuds to appear. Under “Other Devices,” you should see your Motorola earbuds. If not, try turning Bluetooth off and on again, or put the earbuds back in the case and take them out.
- Tap the earbuds’ name. iOS will connect automatically. You may see a “Pairing” request—tap “Pair” if asked.
- Confirm connection. Once paired, the earbuds move to “My Devices” and show as “Connected.”
Pairing with Windows 10 or Windows 11
- Put the earbuds in pairing mode. Same as above—take them out of the case and hold the touch buttons until the LED flashes.
- Open Windows Bluetooth settings. Click the Start button, then Settings (gear icon) > Bluetooth & devices (Windows 11) or Devices > Bluetooth & other devices (Windows 10).
- Turn on Bluetooth. If it’s off, toggle it on.
- Add a Bluetooth device. Click “Add device” (or “Add Bluetooth or other device”). In the pop-up, choose Bluetooth.
- Select your earbuds. Wait for the list to populate, then click on your Motorola earbuds. Windows will pair and install drivers automatically.
- Confirm. You’ll see “Your device is ready to go” and the earbuds will appear under “Audio.”
Common Mistakes
- Not putting earbuds in pairing mode. Simply taking them out of the case may not trigger pairing if they were already paired to another device. You must press and hold the touch buttons until the LED flashes.
- Leaving Bluetooth off. Obvious but easy to miss—make sure Bluetooth is enabled on the target device.
- Pairing to the wrong device. If your earbuds are already connected to your phone, they won’t show up on your laptop. Disconnect from the first device or put the earbuds in pairing mode again.
- Not charging the earbuds. Low battery can prevent the earbuds from entering pairing mode or maintaining a connection.
- Interference from other Bluetooth devices. Multiple active Bluetooth devices nearby can cause the earbuds to connect to the wrong one or fail to appear.
Tips
- Reset the earbuds if you have trouble. Place both earbuds in the charging case, close the lid, wait 10 seconds, then take them out and try pairing again. For a full reset, press and hold the touch buttons for 10-15 seconds until the LED flashes red and white (or you hear “reset”).
- Keep the earbuds close to the device. Stay within 3 feet (1 meter) during pairing to avoid signal drops.
- Update firmware if possible. Some Motorola earbuds have a companion app (like “Moto Buds” or “Motorola Audio”) that can update firmware and customize controls. Check your app store.
- For Windows, use the “Bluetooth” option, not “Everything else.” Choosing “Everything else” may not show audio devices.
- After pairing once, future connections are automatic. Just take the earbuds out of the case and they’ll reconnect to the last device.
Troubleshooting
Earbuds not showing up in Bluetooth list
- Make sure the earbuds are in pairing mode (LED flashing).
- Turn Bluetooth off and on again on your device.
- Restart the device (phone/PC).
- Reset the earbuds as described above.
Pairing fails or drops immediately
- Check that the earbuds are charged.
- Move away from Wi-Fi routers, microwaves, or other devices that may cause interference.
- On Windows, remove the earbuds from the paired devices list and pair again from scratch.
Only one earbud connects
- Place both earbuds back in the case, close the lid, wait 10 seconds, then take them out together.
- If the issue persists, reset the earbuds (hold both touch buttons for 10-15 seconds).
- Clean the charging contacts on the earbuds and case with a dry cloth.
Earbuds connect but no sound
- Check the audio output on your device. On Windows, make sure the earbuds are set as the default playback device (right-click the speaker icon > Sounds > Playback tab).
- On a phone, check the media volume and ensure the earbuds are not paused.
- Disconnect and reconnect the earbuds.
Earbuds keep reconnecting to an old device
- Turn off Bluetooth on the old device, or unpair the earbuds from it.
- Put the earbuds in pairing mode again to connect to the new device.
Frequently Asked Questions
How do I put my Motorola earbuds in pairing mode?
Take both earbuds out of the charging case. If they don’t automatically enter pairing mode, press and hold the touch button on each earbud for about 5 seconds until the LED flashes blue and red (or you hear a voice prompt).
Why won’t my Motorola earbuds pair with my iPhone?
Ensure the earbuds are in pairing mode and that Bluetooth is on. If they still don’t appear, try resetting the earbuds (place in case, close lid, wait 10 seconds, then hold touch buttons for 10-15 seconds). Also, check that they aren’t already connected to another device.
Can I connect my Motorola earbuds to two devices at once?
Most Motorola earbuds support multipoint connection, meaning they can stay connected to two devices simultaneously (e.g., a phone and a laptop). To use this, pair with both devices. If your model doesn’t support multipoint, you’ll need to disconnect from one before connecting to the other.
How do I reset my Motorola earbuds?
Place both earbuds in the charging case and close the lid. Wait 10 seconds, then take them out. To perform a full factory reset, press and hold the touch buttons on both earbuds for about 10-15 seconds until the LED flashes red and white (or you hear a reset sound). Then re-pair them with your device.
Why do my earbuds keep disconnecting?
This can be due to low battery, interference, or being out of range (typically 30 feet/10 meters). Try charging the earbuds, moving closer to the device, and avoiding areas with heavy Wi-Fi or Bluetooth traffic. Resetting the earbuds often fixes persistent disconnection issues.
Do Motorola earbuds work with Windows 11?
Yes, they work like any standard Bluetooth audio device. Follow the Windows pairing steps above. If you have trouble, make sure your Windows Bluetooth drivers are up to date.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Google Photos Backup Stuck? Fixes That Work
- Record Your Own Alarm Sound on Android
- Transfer Music from ZTE to iPhone: Full Guide
- Angel Investor vs Venture Capitalist: Key Differences
- Sync Apps Between Android Devices Using Google Play
- Find What Drains Your iPhone Battery Fast