sodcalculator

10 Tech How-To

Wake Windows 10 PC Remotely: Step-by-Step

Guide 10-53571 · Updated · Step by step

This guide shows you how to wake your Windows 10 PC from sleep or hibernation when you are away from it, using another device on the same network or the internet. You will learn the necessary BIOS/UEFI settings, Windows configuration, and a reliable wake-on-LAN tool to make it work every time.

What You’ll Need

  • A Windows 10 PC with a wired Ethernet connection (Wi-Fi wake is unreliable and often unsupported).
  • Another device (smartphone, tablet, or another computer) to send the wake-up signal.
  • Administrator access to your PC to change power settings and firewall rules.
  • Access to your router’s settings if you want to wake from outside your local network.
  • A free wake-on-LAN app or tool (e.g., Wake on Lan for Android, or a desktop utility).

Step-by-Step

  1. Enable Wake-on-LAN in BIOS/UEFI. Restart your PC and press the key shown on the first screen (often Del, F2, F10, or Esc) to enter setup. Look for a setting named “Wake on LAN,” “Power On by PCI-E,” or “Resume by LAN.” Enable it and save/exit. The exact location varies by motherboard, so check your manual if you can’t find it.
  2. Enable Wake-on-LAN in Windows. Open Device Manager (right-click the Start button and select it). Expand “Network adapters,” right-click your Ethernet adapter, and select “Properties.” Go to the “Power Management” tab and check all three boxes: “Allow this device to wake the computer,” “Only allow a magic packet to wake the computer,” and “Allow the computer to turn off this device to save power.” Click OK.
  3. Disable Fast Startup (recommended). Open Control Panel > Hardware and Sound > Power Options > Choose what the power buttons do. Click “Change settings that are currently unavailable,” then uncheck “Turn on fast startup” under Shutdown settings. This prevents the PC from entering a hybrid shutdown state that blocks wake-on-LAN. Save changes.
  4. Find your PC’s MAC address and IP address. Open Command Prompt and type ipconfig /all. Look for your Ethernet adapter’s “Physical Address” (this is the MAC, format like 00-1A-2B-3C-4D-5E) and its IPv4 address (e.g., 192.168.1.100). Note these down.
  5. Set a static IP address (for local network use). To avoid the IP changing, go to Settings > Network & Internet > Ethernet > Change adapter options. Right-click your Ethernet adapter, select Properties, then double-click “Internet Protocol Version 4 (TCP/IPv4).” Choose “Use the following IP address” and enter an IP outside your router’s DHCP range (e.g., 192.168.1.200), subnet mask 255.255.255.0, and your router’s IP as default gateway. You can also set a DHCP reservation in your router’s admin page—this is often easier.
  6. Allow Wake-on-LAN through Windows Firewall. Wake-on-LAN uses UDP port 9 (and sometimes 7). Open Windows Defender Firewall with Advanced Security (type it in Start). Click “Inbound Rules” > “New Rule…” > Port. Choose UDP and enter port 9. Allow the connection, check all profiles (Domain, Private, Public), name it “Wake-on-LAN,” and finish.
  7. Test on your local network. Install a wake-on-LAN app on your phone or use a desktop tool. Enter your PC’s IP address and MAC address (the app may ask for the broadcast address, e.g., 192.168.1.255). Put your PC to sleep (Start > Power > Sleep). Then send the wake command. The PC should power on within a few seconds.
  8. Set up remote access from outside your network (optional). To wake from the internet, you need to forward UDP port 9 to your PC’s static IP in your router’s port forwarding settings. Then find your public IP (search “what is my IP” on a device on the same network). Use that public IP in your wake-on-LAN app. Be aware that your public IP may change unless you set up DDNS (Dynamic DNS) with a service like No-IP or DuckDNS.

Common Mistakes

  • Using Wi-Fi: Wake-on-LAN over Wi-Fi is unreliable and often not supported by drivers. Use Ethernet.
  • Fast Startup enabled: This makes the PC shut down in a hybrid state that ignores wake packets. Disable it.
  • Wrong MAC address: Make sure you use the MAC of the Ethernet adapter, not the Wi-Fi adapter. Also, some motherboards have multiple LAN ports—use the one connected.
  • Firewall blocking: Even with the rule added, some security software may block UDP port 9. Temporarily disable third-party firewalls to test.
  • Sleep vs. Hibernate: Wake-on-LAN works from sleep and hibernate, but not from a full shutdown unless your BIOS supports “Wake on LAN from S5” (off state). Check your BIOS.

Tips

  • Set your PC to sleep after a period of inactivity (Settings > System > Power & sleep) so it is ready to wake.
  • Use a dedicated wake-on-LAN app that can store multiple profiles if you have several PCs.
  • For remote wake, consider using a router with built-in DDNS to keep your public IP stable.
  • If your motherboard has “ErP” or “Deep Sleep” mode enabled in BIOS, it may cut power to the network card entirely—disable that.
  • Test the wake command with the PC in sleep mode first; if that works, then try hibernate.

Troubleshooting

PC doesn’t wake at all: Check that the Ethernet cable is plugged in and the link light is on. Verify the BIOS setting is enabled. Try sending the magic packet with the PC fully shut down (if your BIOS supports S5 wake). If still not working, test with a different wake-on-LAN tool.

Works locally but not remotely: Confirm the port forwarding is correct (UDP 9 to your PC’s static IP). Check that the public IP you are using is current. Some routers require you to enable “Port Forwarding” for UDP separately from TCP. Also, ensure your PC’s firewall allows inbound UDP 9 from the internet (the rule you added should cover it).

PC wakes but immediately goes back to sleep: This can happen if the wake packet is sent repeatedly or if the PC is set to sleep again due to inactivity. Check your power settings and make sure you are sending the packet only once. Also, some network activity (like Windows Update) can wake the PC and then it goes back to sleep—that’s normal.

Wake-on-LAN option missing in Device Manager: Your network adapter may not support it. Update the driver from the manufacturer’s website. If it still doesn’t appear, your adapter may not support wake-on-LAN at all—consider a USB Ethernet adapter that does.

Frequently Asked Questions

Can I wake my PC from a full shutdown?

Yes, if your motherboard supports “Wake on LAN from S5” (off state). This is often a separate BIOS setting. If not, the PC must be in sleep or hibernate.

Do I need a static IP?

For local network wake, a static IP helps but isn’t strictly required if you use the broadcast address. For remote wake, you must have a static IP or a DHCP reservation so the port forward points to the right device.

Is wake-on-LAN secure?

Wake-on-LAN itself sends a magic packet that only turns on the PC—it doesn’t give access. However, if you forward port 9 to the internet, anyone can send a magic packet and wake your PC. That’s usually harmless, but it can be annoying. You can restrict the source IP in your router’s firewall rules.

Can I wake a laptop?

Yes, but it must be connected to Ethernet and plugged in (or have the battery fully charged). Laptops often disable wake-on-LAN on battery to save power.

What is a magic packet?

A magic packet is a special network frame that contains your MAC address repeated 16 times. The network card detects it and signals the motherboard to power on.

Why doesn’t wake-on-LAN work after a power outage?

Some BIOS settings reset after a power loss. Re-enter BIOS and re-enable wake-on-LAN. Also, if the PC was shut down abruptly, it may be in a full shutdown state that doesn’t respond unless S5 wake is supported.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →