sodcalculator

10 Tech How-To

How to Remove Single Hung Windows: Step-by-Step Guide

Guide 10-51841 · Updated · Step by step

Removing a single hung window is a straightforward DIY job if you understand how the sash and balance system work. This guide walks you through taking out the lower sash, the upper sash, and the balance system so you can clean, repair, or replace the window. You’ll need a few basic tools and about 30 minutes per window. Before starting, confirm your window is a single hung (only the bottom sash moves) and not a double hung (both sashes move), as the removal steps differ slightly.

What You’ll Need

  • Flathead screwdriver
  • Phillips screwdriver (or drill with bits)
  • Putty knife or thin pry bar
  • Utility knife
  • Safety glasses
  • Work gloves
  • Drop cloth or old towel
  • Penetrating oil (like WD-40) if parts are stuck

Step-by-Step

  1. Clear the area. Remove any window treatments, curtains, blinds, or screens. Lay a drop cloth below the window to protect the floor and catch any loose parts.
  2. Inspect the window. Look at the bottom of the lower sash. You should see a tilt latch on each side (small spring-loaded buttons) near the top corners of the sash, or a single center latch. Also check for any screws or covers on the jamb (the vertical tracks) that hold the balance system in place.
  3. Release the tilt latches (if present). Push both tilt latches inward simultaneously toward the center of the sash. While holding them in, tilt the top of the lower sash outward toward you. This disengages the sash from the balance shoes in the jamb tracks.
  4. Remove the lower sash. With the top tilted out, lift the sash up slightly and then pull it straight out of the frame. Set it aside on the drop cloth. If the sash doesn’t have tilt latches, look for a release clip on the balance shoe (the metal piece in the track) – press it to free the sash, then lift and tilt out.
  5. Access the upper sash. With the lower sash removed, you can now see the upper sash. In a single hung window, the upper sash is fixed and does not move. It may be held in place by screws, nails, or a stop molding (a thin wooden strip) along the top and sides.
  6. Remove the stop molding (if present). If there is a stop molding covering the upper sash, use a putty knife to gently pry it away from the frame. Start at the bottom corner and work your way up. Be careful not to crack the wood. If it’s painted shut, score the paint line with a utility knife first.
  7. Unscrew or unnail the upper sash. Look for screws on the top of the upper sash or along the sides. Remove them with the appropriate screwdriver. If the sash is nailed, use a pry bar to gently work it loose. In some windows, the upper sash is simply held in place by the balance system – if so, you’ll need to release it from the balance shoes just like the lower sash.
  8. Pull out the upper sash. Once freed, tilt the upper sash inward and pull it out of the frame. If it’s stuck, run a utility knife around the perimeter to break any paint seal, then gently pry it out.
  9. Remove the balance system (optional). If you’re replacing the entire window or the balances are broken, you’ll need to remove the balance system. Look for a small screw or clip at the top of each jamb track that holds the balance tube or spring in place. Remove these screws and carefully pull the balance system out of the track. Be aware that some balances are under spring tension – keep your face and hands clear.
  10. Clean the frame. With both sashes and the balances removed, take the opportunity to clean the sill, tracks, and frame of dust, debris, and old paint chips. This is also a good time to check for rot or damage.

Common Mistakes

  • Forcing the tilt latches. If the latches are stuck, don’t force them – you’ll break the spring. Use penetrating oil and wait a few minutes before trying again.
  • Removing the wrong sash first. In a single hung, always remove the lower sash first. Trying to remove the upper sash while the lower is still in place is nearly impossible and can damage the frame.
  • Not supporting the sash. A glass sash is heavy. Always hold it firmly with both hands when tilting and pulling it out. Letting it drop can shatter the glass or damage the frame.
  • Skipping the paint score. If the window is painted shut, skipping the utility knife step will cause the paint to peel or the wood to splinter when you pry.
  • Removing balance screws without noting the position. If you’re removing the balances, note which side they came from and their orientation. They are not always interchangeable.

Tips

  • Take photos with your phone before removing anything. This gives you a reference for reassembly.
  • Label each sash and balance with masking tape (e.g., “lower left”) so you know exactly where each piece goes back.
  • Work with a partner for larger windows – it’s much safer and easier to manage the weight.
  • If the tilt latches are broken, you can often still remove the sash by pressing the balance shoe release clip with a screwdriver through the jamb slot.
  • Use a vacuum with a crevice tool to clean out the balance tracks before reinstalling.
  • Lubricate the tracks and moving parts with a silicone spray (not oil, which attracts dust) before putting the window back together.

Troubleshooting

  • Sash won’t tilt out. The tilt latches may be stuck or broken. Try pressing them with a screwdriver tip. If they don’t move, apply penetrating oil and wait. If they’re broken, you’ll need to remove the stop molding on the side of the jamb to access the balance shoe release clip directly.
  • Sash is painted shut. Run a utility knife around all edges where the sash meets the frame. Then insert a putty knife and gently tap it with a hammer to break the seal. Work your way around the entire perimeter.
  • Balance shoe won’t release. The release clip may be seized. Spray it with penetrating oil and try again. If it still won’t budge, you may need to remove the entire balance system from the top of the jamb, which will free the shoe.
  • Upper sash is stuck in place. If it’s fixed with screws that are stripped, use a screw extractor or drill out the screw head. If it’s nailed, carefully pry with a flat bar, placing a scrap block under the bar to protect the frame.
  • Glass cracks during removal. Stop immediately. Do not try to remove a cracked sash by hand – the glass can shatter. Tape the crack with painter’s tape, then carefully remove the sash with a partner, or call a professional glazier.
  • You can’t find the release mechanism. Some older windows have a different system – a spiral balance with a pin that fits into a hole in the sash. Look for a small hole or pin on the side of the sash. You may need to rotate the sash slightly to disengage it.

Frequently Asked Questions

Do I need to remove the upper sash in a single hung window?

Not unless you’re replacing the entire window or need to access the glass for repair. For cleaning or replacing just the lower sash, you only need to remove that one.

How do I know if my window is single hung or double hung?

Try to slide the upper sash up. If it doesn’t move, it’s a single hung. If both sashes move, it’s a double hung. Single hung windows are more common in older homes and are cheaper to manufacture.

Can I remove a single hung window from the outside?

It’s possible, but not recommended. The tilt mechanism is designed to be operated from inside. Working from outside also creates a fall risk. Always remove from the inside.

What if my window has no tilt latches?

Older windows may not have tilt latches. In that case, look for a small release clip on the balance shoe inside the jamb track. Press it with a screwdriver while lifting the sash. Some very old windows have a pin that you pull out.

How do I put the window back in?

Reverse the steps: insert the upper sash first (if removed), then the lower sash. Tilt the lower sash into the tracks, align the balance shoes with the pins or clips, and push the top of the sash in until the tilt latches click. Then test the window by sliding it up and down.

Is it safe to remove a window myself?

Yes, for most standard single hung windows, as long as you work slowly and support the sash properly. If the window is large, on an upper floor, or shows signs of rot, it’s safer to have a helper or hire a professional.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →