Remove Wireless Projection Banner in Windows 10

This guide shows you how to disable the “Wireless projection” banner that sometimes appears at the top of your screen in Windows 10, usually after connecting a wireless display or when the system detects a nearby Miracast device. You’ll learn both quick temporary dismissals and permanent settings changes to stop it from showing up again. No special tools are needed—just your Windows 10 PC and a few minutes.

What You’ll Need

• A Windows 10 PC with administrator access (to change some settings)
• Optional: A wireless display or Miracast receiver if you want to test the changes

Step-by-Step

1. Dismiss the banner temporarily: If the banner is currently visible, simply click the X button on the right side of the banner. This will close it for the current session, but it may reappear later.
2. Turn off wireless projection via Action Center: Click the notification icon (speech bubble) in the system tray to open Action Center. Look for the Connect quick action tile (it looks like a monitor with a cable). If it’s highlighted or blue, click it to turn it off. This stops active wireless projection and usually removes the banner.
3. Disable the “Allow this PC to be discoverable” setting: Go to Settings (Windows key + I) > System > Projecting to this PC. Under the Multiple displays section, set “Windows can project to this PC” to “Always off”. This prevents your PC from being detected as a projection target, which is a common trigger for the banner.
4. Turn off automatic projection discovery: In the same Projecting to this PC settings page, uncheck the box that says “Only project when this PC is plugged in” if you want to avoid prompts while on battery. Also uncheck “Ask me before projecting to this PC” to stop the banner from asking permission each time.
5. Disable the wireless display service (advanced): If the banner persists, you can disable the service that handles wireless projection. Press Windows key + R, type services.msc, and press Enter. Scroll down to “Windows Wireless Display Service” (or “WlanSvc” if you see it). Right-click it, select Properties, set Startup type to Disabled, and click Stop if it’s running. Click OK. Note: This may affect other wireless display features like Miracast.
6. Update graphics drivers: Sometimes the banner appears due to outdated graphics drivers. Open Device Manager (right-click Start > Device Manager), expand Display adapters, right-click your graphics card, and select Update driver. Choose Search automatically for drivers and follow the prompts. Restart your PC after updating.
7. Run the Hardware and Devices troubleshooter: Go to Settings > Update & Security > Troubleshoot > Additional troubleshooters. Select Hardware and Devices and run it. This can fix underlying issues that cause the banner to appear.

Common Mistakes

• Only closing the banner without changing settings: Closing the banner with the X button only hides it temporarily. It will come back unless you adjust the projection settings.
• Disabling the wrong service: Be careful not to disable “Windows Wireless Display Service” if you actually use Miracast or wireless displays regularly—you’ll lose that functionality.
• Forgetting to restart after driver updates: Graphics driver updates often require a restart to take effect. If you skip the restart, the banner may still appear.
• Turning off the Connect tile completely: If you turn off the Connect tile in Action Center, you won’t be able to quickly connect to wireless displays. Only do this if you never use that feature.

Tips

• If you only see the banner occasionally, it’s often triggered by a nearby wireless display or a device trying to connect. Turning off the “discoverable” option is the most effective permanent fix.
• Keep your Windows 10 updated. Microsoft has refined projection behavior in cumulative updates, so a recent update may already have fixed the issue.
• If you need to use wireless projection occasionally, leave the service enabled and just disable the “Ask me before projecting” option to reduce banner pop-ups.
• Use the Action Center quick toggle for “Connect” to quickly enable or disable projection without digging into settings.

Troubleshooting

If the banner still appears after following the steps:

• Check if the banner appears after a reboot: Some settings only apply after a restart. Reboot your PC and see if the banner returns.
• Verify the service is actually disabled: Go back to services.msc and double-check that the startup type is “Disabled” and the service status is “Stopped”. Sometimes it resets after an update.
• Look for third-party display software: Some graphics utilities (like Intel Graphics Command Center or NVIDIA Control Panel) have their own projection settings. Open those apps and disable any auto-discover or notification options.
• Check Group Policy (Pro/Enterprise only): If you’re on Windows 10 Pro, you can use Group Policy Editor (gpedit.msc) to enforce settings. Navigate to Computer Configuration > Administrative Templates > Windows Components > Connect and enable “Turn off wireless projection” to disable it entirely.
• Use Registry Editor (advanced): As a last resort, you can edit the registry. Press Windows key + R, type regedit, and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Connect. If the key doesn’t exist, create it. Create a DWORD (32-bit) named AllowProjection and set its value to 0. Restart your PC. Be extremely careful with the registry—back it up first.
• If nothing works, do a system restore: If the banner started appearing after a recent change, use System Restore to revert to a point before the issue began. Search for “Create a restore point” in the Start menu, click System Restore, and follow the wizard.

Frequently Asked Questions

Why does the wireless projection banner keep appearing?

It appears when Windows detects a wireless display device (like a Miracast receiver) nearby, or when your PC is set to be discoverable for projection. It’s a notification that asks if you want to connect.

Will disabling the wireless display service break anything else?

Yes, it will disable all wireless projection features, including Miracast. If you use wireless displays or screen mirroring, you’ll need to re-enable the service.

Can I just hide the banner without turning off the feature?

You can dismiss it temporarily by clicking the X, but it will return. To stop it permanently, you need to change the projection settings or disable the service.

Does this affect wired projection (like HDMI)?

No, wired connections are unaffected. The settings and services we changed only apply to wireless projection (Miracast).

Is there a way to stop the banner only when I’m using a specific app?

Not directly. The banner is system-wide. You could try running the app in fullscreen mode, which may hide the banner, but it’s not a reliable fix.

Will the banner reappear after Windows updates?

Sometimes Windows updates can reset certain settings, including projection settings. If the banner returns, reapply the steps above. You may also want to check for new graphics drivers after major updates.

Related

• Community Google Assistant Apps: Safe to Install?
• Samsung Galaxy Battery Settings That Delay Charging
• Isolate Browser Sessions in Playwright Tests