Resetting a Beats Pill can clear a pairing glitch and let you connect it to a phone, tablet, or computer again. First identify which Pill model you have, charge it, and remove any stale Bluetooth entry from the device that will not connect; the button sequence varies by model.
What You’ll Need
- Your Beats Pill and its charging cable, if the battery may be low.
- The phone, tablet, or computer you want to pair.
- Access to that device’s Bluetooth settings. Keep the Pill and device close together while pairing.
Step-by-Step
- Identify the Pill model. Check the product label, packaging, or the model information in your device settings if it is already connected. Beats Pill, Beats Pill+, Beats Pill 2.0, Beats Pill 2.0 XL, Beats Pill 2.0 Wireless, and the newer Beats Pill do not all use the same reset procedure. Do not assume that instructions for one generation apply to another.
- Charge it and power it on. Connect the speaker to power if its charge is uncertain. Turn it on and check for a power light or other normal response. A drained battery can look like a pairing fault. Disconnect it from the charger once it has enough charge for testing if the speaker behaves differently while plugged in.
- Remove the old pairing from your phone or computer. Open Bluetooth settings, find the Pill in the saved or paired devices list, and choose Forget, Remove device, or the equivalent option. The wording depends on the operating system. If the Pill is listed more than once, remove its duplicate entries too.
- Check whether it is connected elsewhere. Turn off Bluetooth temporarily on other phones, tablets, and computers that have previously used the speaker, or disconnect the Pill from them. A speaker that reconnects to another device may not appear ready for a fresh connection.
- Use the reset sequence for your exact model. For the original Beats Pill, press and hold the power button for about 10 seconds, then release it when the indicator lights flash. For Beats Pill+, press and hold the power button and the “b” button together for about six seconds, until the Fuel Gauge flashes. For the newer Beats Pill, press and hold the system button for at least 15 seconds; release it when the light flashes red and white. These resets clear the speaker’s settings or pairing state. For other Pill generations, look up the reset instructions using the exact model name before holding buttons; do not substitute a sequence from a different model.
- Put the speaker into pairing mode. If the reset has not already made it discoverable, press the model’s system or power button as described in its instructions until the indicator flashes or you hear a pairing prompt. Keep the speaker powered on and close to the device. A steady light may mean it is already connected, not discoverable.
- Pair from the device’s Bluetooth menu. Open Bluetooth settings, make sure Bluetooth is on, and wait for the Pill to appear under available devices. Select the matching name and accept a pairing request if one appears. If prompted for a PIN, do not guess: check the instructions for that model and device.
- Test the connection. Play audio at a low volume, then raise it gradually. Confirm that sound comes from the Pill and that playback remains connected for a minute or two. If it pairs but audio stays on the phone, select the Pill as the sound output in the device’s audio or playback controls.
Common Mistakes
- Using the wrong reset combination: Button sequences differ across Pill versions. Identify the model before resetting, and stop if the expected light pattern does not occur.
- Leaving the old device entry in place: The phone may keep trying to use an outdated pairing record. Forget the speaker first, then search for it as a new device.
- Pairing while the speaker is connected elsewhere: Disable Bluetooth on nearby devices that may grab the connection automatically.
- Confusing a reset with pairing mode: A reset clears a state; the speaker may still need a separate action to become discoverable.
- Holding buttons indefinitely or repeatedly: Follow the model-specific timing and light cue. Repeatedly trying random combinations can trigger an unintended action or make it harder to tell what worked.
- Assuming a successful pairing means audio is routed: The device may connect for calls or control but keep media output elsewhere. Check the selected audio output.
Tips
- Keep the Pill within a few feet (about a metre) of the phone during setup, and move away from other active Bluetooth devices if discovery is unreliable.
- Restart the phone, tablet, or computer after removing the old pairing if it continues to show a stale connection.
- Try pairing the Pill with a second device. If it works there, the first device’s Bluetooth settings or saved record are more likely to be the problem.
- After a reset, you may need to pair the speaker again with every device you use. A reset does not repair damaged hardware or guarantee a firmware update.
- Use the model’s product guide for exact indicator meanings. A flashing light can indicate different states on different generations.
Troubleshooting
The Pill does not turn on: Charge it with a known-working cable and power adapter, and check the charging port for visible debris. Do not insert metal objects or force anything into the port. If there is no light or response after charging, consult the product support instructions for that model.
The Pill does not appear in Bluetooth settings: Confirm it is powered on and in pairing mode, then turn Bluetooth off and back on on the phone. Move closer, temporarily disable Bluetooth on previously paired devices, and search again. Restart both devices if needed.
The phone says it cannot connect: Forget the Pill, restart the phone and speaker, and repeat the pairing process. Make sure the speaker is not already connected to another device. If the error persists, reset only with the sequence specified for the exact model.
It connects, then drops: Charge the Pill, keep it near the source, and test without walls or other sources of interference between them. Disconnect other paired devices and check whether the drop happens with a second phone. If it does, the speaker may need service.
It pairs but there is no sound: Check the device’s media output selector and volume on both devices. Pause and resume playback, then disconnect and reconnect. Some apps retain their own output selection, so check the app’s playback controls too.
The reset light pattern never appears: Stop and verify the model and button instructions. Button names and reset behavior vary. If the correct sequence does not work with a charged speaker, use the manufacturer’s support information rather than trying an unverified combination.
Frequently Asked Questions
Will resetting a Beats Pill erase saved Bluetooth pairings?
It can clear the speaker’s pairing state or settings, depending on the model. Expect to remove the old entry from your phone and pair again; exact effects vary by generation.
How do I know which Beats Pill I have?
Check its label, packaging, or device information, and match the exact model name before following reset instructions. Similar-looking generations can have different button sequences.
Do I need to reset the Pill every time it will not connect?
No. First charge it, disconnect it from other devices, forget the old Bluetooth entry, and try pairing again. Reset only if those simpler steps do not help.
Can I reset the Pill from my phone?
Usually the reset is performed with buttons on the speaker. Your phone can forget the pairing, but that is not necessarily the same as resetting the Pill.
Why does my Beats Pill connect but play no audio?
The phone may have selected another output, or the app may be using a different playback route. Select the Pill as the media output and check volume and playback controls.
What if it still will not pair after a reset?
Test it with another device and confirm the model-specific reset was completed. If it fails with multiple devices, or will not power on, consult support for the exact model.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Apps Not Downloading From Play Store
- Secure a Samsung Galaxy After a Zero-Day Disclosure
- What to Check Before Installing Linux Alongside Windows
- Fix OEM Activation Error 0xc004c060 in Windows 10
- Why Does My App Run One Query for the List and One per Item?
- Fix Google Chrome Has Stopped Working