This guide shows you how to reset an iPad when you don’t have the iCloud password. You’ll learn the official recovery mode method that erases the device and removes the Activation Lock, plus what to do if you run into problems. Before starting, make sure you know the Apple ID email or phone number associated with the iPad, and back up any data you want to keep if possible.
What You’ll Need
- A computer (Mac or Windows PC) with the latest version of iTunes installed, or a Mac with macOS Catalina or later (Finder is used instead of iTunes).
- The USB cable that came with your iPad (or a compatible one).
- Your iPad’s Apple ID email address (you’ll need it to prove ownership after the reset).
- If the iPad has a SIM card, you may want to remove it before starting.
Step-by-Step
- Put your iPad into Recovery Mode. The exact buttons depend on your iPad model:
- iPad with Face ID (no Home button): Press and quickly release the Volume Up button, then the Volume Down button. Press and hold the Top button until the iPad turns off. Keep holding the Top button until the recovery mode screen appears (a computer icon or a screen with a cable).
- iPad with Home button (iPad 6th gen and earlier, iPad Pro 1st gen): Press and hold the Home button and the Top (or Side) button at the same time. Keep holding until the recovery mode screen appears.
- Connect your iPad to the computer. Use the USB cable. If you’re using a Mac with macOS Catalina or later, open Finder. On Windows or older macOS, open iTunes. If you don’t see a prompt, manually select your iPad in the sidebar (Finder) or the device icon (iTunes).
- Choose “Restore” when prompted. A dialog will appear saying that your iPad has a problem and needs to be updated or restored. Click Restore (not Update). This will download the latest iPadOS software and erase your iPad completely.
- Wait for the restore to finish. The download may take a while depending on your internet speed. Do not unplug the iPad during this process. Once the restore is complete, the iPad will restart and show the “Hello” setup screen.
- Set up your iPad. When you reach the Activation Lock screen, you’ll be asked for the Apple ID and password that were previously used on the device. If you don’t have them, you’ll need to use the steps in the Troubleshooting section below.
- If you know the Apple ID password, enter it. If you don’t, you’ll need to use Account Recovery (see Troubleshooting).
Common Mistakes
- Not entering Recovery Mode properly. If you hold the buttons too long or release too early, the iPad may just turn off or restart normally. Watch for the recovery mode screen (a computer or cable icon) before connecting to the computer.
- Choosing “Update” instead of “Restore”. Update attempts to keep your data, but it may not remove Activation Lock. You need to select Restore to erase everything.
- Using a different Apple ID than the one originally used. Activation Lock is tied to the first Apple ID that signed in on the iPad. If you use a different one, it won’t work.
- Unplugging the iPad during the restore. This can cause a software error and leave the iPad in a non-functional state.
- Forgetting to back up. If you have any data you want to keep, you should back up before resetting, because the restore erases everything.
Tips
- Use a reliable computer and cable. A faulty cable or port can cause the restore to fail.
- Make sure your computer has enough storage. The iPadOS firmware file is several gigabytes, so you need free space on your computer.
- Keep the iPad connected. Even after the restore finishes, keep it plugged in until you see the setup screen.
- If you have the original proof of purchase, keep it handy. Apple Support may ask for it if you need to unlock the device.
- Try a different USB port if the computer doesn’t recognize the iPad. A direct port on the back of a desktop is often more reliable than a front port or a hub.
Troubleshooting
If the restore fails or the iPad is stuck in Recovery Mode:
- Force restart the iPad. For Face ID models: press and release Volume Up, then Volume Down, then hold the Top button until the Apple logo appears. For Home button models: press and hold both the Home and Top buttons until the Apple logo appears. Then try the recovery mode process again.
- Try a different computer. If one computer doesn’t recognize the iPad, another may work.
- Update your computer’s software. Make sure iTunes is the latest version (on Windows) or that your Mac is updated to a recent macOS version.
If you see the Activation Lock screen and don’t know the Apple ID password:
- Use Account Recovery. Go to iforgot.apple.com and enter the Apple ID email. Follow the prompts to reset the password. This may take a few days if Apple needs to verify your identity.
- Contact Apple Support. If you can prove you own the iPad (with a receipt or original packaging), Apple may be able to remove Activation Lock for you. You’ll need to provide the device’s serial number and a proof of purchase.
- Do not attempt to bypass Activation Lock. There is no legitimate way to do this without Apple’s help. Third-party tools that claim to bypass it are usually scams or may harm your device.
If the iPad is disabled (shows “iPad is disabled” message):
- You can still use Recovery Mode to erase it, but you’ll still need the Apple ID password to get past Activation Lock.
Frequently Asked Questions
Q: Can I reset my iPad without a computer?
A: No, you need a computer to put the iPad into Recovery Mode and restore it. There’s no way to do a full reset without one.
Q: Will this remove the Activation Lock?
A: The restore itself removes the data, but Activation Lock is tied to your Apple ID. If you don’t know the password, you’ll need to reset it via Apple’s website or contact Apple Support.
Q: What if I bought a used iPad and the previous owner didn’t remove their Apple ID?
A: You need to contact the previous owner and ask them to remove the device from their iCloud account. If you can’t reach them, you’ll need to contact Apple Support with proof of purchase.
Q: How long does the restore take?
A: The download of iPadOS can take 10-30 minutes depending on your internet speed, and the restore itself usually takes about 5-10 minutes. The whole process can take up to an hour.
Q: Will I lose all my data?
A: Yes, restoring erases everything on the iPad. If you have an iCloud or iTunes backup, you can restore your data after the reset, but you’ll still need to enter the Apple ID password to reactivate the device.
Q: Can I use a friend’s computer to do this?
A: Yes, as long as you have the USB cable and the computer has iTunes (or Finder on macOS Catalina or later). Just make sure you trust the computer, as it will have access to your iPad’s data.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix msmpeg2vdec.dll Errors in Windows
- How to Update Sonos App and Speakers
- Unlock iPad Without Apple ID: Is It Possible?
- iOS 18 WhatsApp Notifications Not Working? Fix
- Fix Windows Cannot Locate Suitable Printer Driver
- How to Group Text and Pictures in Word