Getting locked out of your Huawei Mate 9 can be frustrating, but you can regain access by performing a factory reset. This guide walks you through the two main methods: using Google’s Find My Device (if you had it set up) and the hardware key combination for a hard reset. You’ll need your Google account credentials and, for the hardware method, a charged battery and a safe place to set the phone down.
What You’ll Need
- A computer, tablet, or another phone with internet access (for the Find My Device method).
- Your Google account email and password (the one linked to the Mate 9).
- The Mate 9 itself, with at least 30% battery (for the hardware method).
- A USB cable and a computer (optional, only if you need to charge the phone first).
Step-by-Step
Method 1: Using Google Find My Device (If You Had It Enabled)
- On a computer or another device, go to google.com/android/find and sign in with the same Google account that is on your locked Mate 9.
- The website will try to locate your phone. Once it appears in the list, click on it.
- In the left panel, click Erase Device. Read the warning – this will delete all data on the phone and reset it to factory settings.
- Click Erase again to confirm. The phone will start erasing remotely. This may take a few minutes.
- Once the erase is complete, your Mate 9 will restart and show the initial setup screen. You can now set it up as a new device or restore from a backup.
Method 2: Hardware Key Combination (Factory Reset from Recovery Mode)
- Power off your Huawei Mate 9 completely. If it’s unresponsive, press and hold the power button for about 10 seconds until it shuts down.
- Once off, press and hold the Volume Up button and the Power button simultaneously.
- Keep holding both buttons until the Huawei logo appears, then release the Power button but continue holding Volume Up.
- After a few seconds, the phone will enter EMUI recovery mode (a screen with options like “Restart” and “Wipe data/factory reset”).
- Use the Volume buttons to navigate and the Power button to select. Scroll down to Wipe data/factory reset and press Power.
- On the next screen, select Wipe data/factory reset again (or “Yes” if prompted) and press Power.
- Wait for the reset to complete. You’ll see a message like “Factory reset successful.”
- Now select Restart (or “Reboot system now”) and press Power. The phone will reboot and take you to the initial setup screen.
Common Mistakes
- Not backing up data: Both methods wipe all personal data, photos, messages, and apps. If you haven’t backed up, that data is gone.
- Entering recovery mode incorrectly: The key combo must be pressed in the right order. If you press Volume Down instead of Up, you may enter a different menu or nothing happens. Also, release the Power button as soon as the logo appears.
- Using the wrong Google account: For Find My Device, you must use the exact Google account that was synced to the phone. If you don’t remember it, the method won’t work.
- Interrupting the reset: Let the reset process finish completely. Pulling the battery or forcing a reboot during the wipe can corrupt the system.
Tips
- Always enable Find My Device: On a working Mate 9, go to Settings > Security & privacy > Find My Device and make sure it’s on. This is your best remote reset option.
- Back up regularly: Use Google Drive, HiSuite, or the built-in backup feature to keep your data safe. If you’re locked out, you’ll be glad you did.
- Charge before resetting: Ensure the battery is above 30% to avoid the phone dying mid-reset.
- Remove Google account before resetting (if possible): If you can still access the phone partially, go to Settings > Accounts > Google and remove your account. This prevents Factory Reset Protection (FRP) from blocking you after the reset.
Troubleshooting
- Find My Device doesn’t show your phone: Make sure you’re signed in with the correct Google account. If the phone is offline, try again later – it may be in airplane mode or out of battery. You can also try refreshing the page.
- Recovery mode doesn’t appear: If the Huawei logo appears and then the phone boots normally, you didn’t hold the buttons long enough or in the right sequence. Try again, making sure to keep Volume Up pressed until the recovery screen shows.
- Phone asks for Google account after reset (FRP): This is Factory Reset Protection. You’ll need to enter the Google account credentials that were previously on the phone. If you don’t have them, you’ll need to contact Huawei support or use a third-party service (at your own risk).
- Stuck on Huawei logo: If the phone loops on the logo, perform the hardware reset again. If it still doesn’t boot, try charging for 30 minutes and then repeat the process.
- No recovery option “Wipe data”: On some EMUI versions, the option might be labeled “Reset phone” or “Factory reset.” It should be under a section like “Reset” or “Wipe data.”
Frequently Asked Questions
Will a factory reset remove the lock screen password?
Yes, a factory reset removes the current lock screen password, pattern, or PIN. The phone will be as if it were new, and you can set a new one during setup.
Can I reset my Mate 9 without losing data?
No, both methods described here erase all data. If you have a backup (cloud or local), you can restore it after the reset. Without a backup, data is unrecoverable.
What is FRP and how do I bypass it?
FRP (Factory Reset Protection) is a Google security feature that requires you to sign in with the previously synced Google account after a reset. Bypassing it is against Google’s terms and not recommended. The only legitimate way is to enter the correct account credentials.
Will the hardware reset work if the screen is completely unresponsive?
Yes, the hardware key combination works even if the touchscreen is unresponsive, as long as the phone can power on and the buttons work.
How long does a factory reset take?
Typically, it takes 2 to 5 minutes. The phone may reboot once or twice. Don’t interrupt the process.
Can I use my Huawei ID to unlock the phone?
Huawei ID can be used to locate or remotely lock a phone via Find My Phone, but it does not directly reset the lock screen password. You can use it to erase the phone remotely if you’ve enabled that feature.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Spotify Jam Not Working on Mobile? Fixes That Work
- Windows 10 No Internet Secured WiFi Error Fix
- Multi-Cloud GPU Failover Design Guide
- Error Code Currant Destiny? Meaning & Fixes
- How to Set a Timer on iPhone (iOS 18 & 17)
- Block Clipboard Access on Android: Step-by-Step