If you’re locked out of your Samsung phone because you forgot the PIN, pattern, or password, a factory reset is the standard way to regain access. This guide walks through the two main methods: using Samsung’s Find My Mobile service (which preserves your data if you had it enabled) and using the hardware key recovery mode (which erases everything). Before starting, make sure your phone has at least 50% battery and, if possible, back up any data you want to keep—the hardware key method will wipe your phone completely.
What You’ll Need
- A Samsung account and a device where you’re already signed in (for the Find My Mobile method)
- Your phone’s charging cable and a computer or another device with internet access
- Your Google account credentials (for the hardware key method, if your phone has FRP – Factory Reset Protection)
- Your phone’s model name (Settings > About Phone, if you can access it, or look on the back of the device)
Step-by-Step
Method 1: Using Samsung Find My Mobile (Recommended if You Enabled It)
- On a computer or another phone, go to findmymobile.samsung.com and sign in with the same Samsung account that is linked to your locked phone.
- If you have multiple devices, select the locked phone from the list at the top.
- On the left menu, click “Unlock” (it might be under “Lock” or “Security”). This will remotely remove the screen lock (PIN, pattern, or password).
- Confirm the action when prompted. The phone will receive the command over Wi-Fi or cellular data.
- Wait a few minutes, then check your phone. The lock screen should be gone, and you can set a new lock method from Settings.
- If the Unlock option isn’t available, you can also click “Back up” first to save your data, then click “Factory reset” to wipe the phone remotely. This will erase everything, but your backup will be saved to Samsung Cloud.
Method 2: Hardware Key Factory Reset (Works Without a Samsung Account)
This method works on all Samsung Galaxy phones, but it erases all data. You’ll need to know your Google account password afterward to get past the setup screen (FRP).
- Power off your phone completely. If you can’t turn it off normally, press and hold the Power button and Volume Down button for about 10 seconds until the screen goes dark.
- Once the phone is off, press and hold the Volume Up button and the Power button simultaneously. (On older models, also hold the Home button.)
- Keep holding both buttons until the Samsung logo appears, then release. You’ll see the Android recovery menu after a few seconds.
- Use the Volume Down button to navigate to “Wipe data/factory reset” and press the Power button to select it.
- Use Volume Down to highlight “Factory data reset” (or “Yes – delete all user data”) and press Power to confirm.
- When the reset is complete, the menu will show “Reboot system now”. Press Power to restart the phone.
- The phone will boot into the initial setup screen. You’ll need to enter your Google account credentials (the same one that was previously on the phone) to proceed. If you don’t remember them, you’ll be stuck at this point.
Common Mistakes
- Not backing up before a hardware reset: The recovery mode wipe deletes everything—photos, contacts, messages, apps. If you didn’t back up, your data is gone.
- Using the wrong key combination: On some models (especially Galaxy S20 and newer), you need to plug the phone into a computer while holding Volume Up + Power. Without a USB connection, the phone may boot normally instead of into recovery.
- Forgetting your Google password: After a factory reset, FRP will ask for the Google account that was last synced. If you can’t provide it, the phone is unusable until you can reset that password.
- Assuming Find My Mobile is enabled: If you never turned on “Remote unlock” in Settings > Biometrics and security > Find My Mobile, the Unlock option won’t work.
- Interrupting the reset: Pulling the battery or holding buttons during the reset process can corrupt the system and cause boot loops.
Tips
- Before attempting any reset, try the “Forgot pattern” option on the lock screen (for older Android versions) or use Smart Lock if you have a trusted device or location set up.
- If you have a Samsung account with “Find My Mobile” enabled, the Unlock feature is the safest and fastest way—it doesn’t erase your data.
- After a hardware reset, you’ll need to set up your phone as new. Make sure you know your Wi-Fi password and Google account details.
- If you’re selling or giving away the phone, do a factory reset via Settings (if you can access it) or via recovery mode, and then remove the Google account from the phone before resetting to avoid FRP issues.
- Keep your phone charged during the process. A dead battery mid-reset can cause problems.
Troubleshooting
- Phone won’t enter recovery mode: If holding Volume Up + Power doesn’t work, try connecting the phone to a computer with a USB cable, then hold those buttons. For older models, also try Volume Up + Home + Power. If it still fails, check your model’s specific key combo online.
- Find My Mobile says “Unlock” failed: Make sure the phone is connected to the internet (Wi-Fi or mobile data). If the phone is in airplane mode or has no signal, the command won’t reach it. Wait a few minutes and try again.
- Phone boots to a black screen after reset: This can happen if the reset was interrupted. Try entering recovery mode again and selecting “Reboot system now”. If that fails, you may need to use Samsung Smart Switch (on a computer) to perform an emergency recovery, which will reinstall the firmware.
- Stuck on “Google account verification” after reset: You must enter the Google account that was previously on the phone. If you forgot the password, use a computer to go to Google’s account recovery page and reset it. If the account was removed before the reset, you won’t see this screen.
- Phone is not recognized by Find My Mobile: Your Samsung account might not be linked to the phone, or the device is not registered. Try signing in with a different Samsung account (the one you used when setting up the phone).
- Recovery menu is in Chinese or another language: This is rare but can happen if the firmware is from another region. Look for the option with “wipe” or “factory reset” in English, or use the volume keys to select the last option (which is usually “Reboot”).
Frequently Asked Questions
Will a factory reset remove the screen lock?
Yes, a factory reset removes the screen lock (PIN, pattern, password) because it erases all user data and settings. However, on newer Samsung phones, Google’s Factory Reset Protection (FRP) will still ask for the Google account that was previously on the phone before you can use it again.
Can I reset my Samsung phone without a computer?
Yes, you can use the hardware key method (Volume Up + Power) to access recovery mode and perform a factory reset without a computer. You’ll only need a computer if your phone doesn’t enter recovery mode normally, or if you need to use Samsung Smart Switch to fix a boot loop.
What if I forgot my Google account password?
If you forgot the Google account password that was on the phone, you’ll need to reset it via Google’s account recovery page on a computer. Once you have a new password, you can enter it on the phone’s setup screen after the factory reset.
Is there a way to reset without losing my photos and contacts?
Yes, if you have Samsung Find My Mobile enabled, use the “Unlock” feature—it only removes the lock, not your data. If you don’t have that, you can try to back up your data via Samsung Smart Switch on a computer before a factory reset, but you’ll need to unlock the phone to do that.
How long does a factory reset take?
A factory reset typically takes 1 to 5 minutes, depending on the phone model and how much data is stored. After the reset, the phone will reboot and may take another few minutes to reach the setup screen.
Will a factory reset remove the FRP (Google account lock)?
No, a factory reset does not remove FRP. The FRP is a security feature that stays active until you sign in with the Google account that was previously synced on the device. If you don’t know that account, you won’t be able to use the phone after the reset.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Error 0x8007025d in Windows 10
- Fix Alexa App Stuck on Setup
- Android Camera for 7 Office Tasks: Step-by-Step
- Pair Phone to Pioneer Stereo After Bluetooth Reset
- Fix Windows Not Saving Remote Desktop Credentials
- Essential Tips for macOS Users Switching to Windows