sodcalculator

10 Tech How-To

Reset Surface Password with Windows Password Genius Advanced

Guide 10-50655 · Updated · Step by step

If you are locked out of your Microsoft Surface because you forgot your password, Windows Password Genius Advanced can create a bootable USB drive to reset it. This guide walks you through the entire process, from preparing the USB to booting your Surface from it and clearing the password — no technical background required.

What You’ll Need

  • A working Windows PC (to create the recovery USB).
  • A USB flash drive (8 GB or larger; all data on it will be erased).
  • Windows Password Genius Advanced software (download from the official website and install on the working PC).
  • Your Surface device (the one you are locked out of).
  • Access to a second computer or phone to look up steps if needed.

Step-by-Step

  1. Download and install Windows Password Genius Advanced on your working Windows PC. Use the official website to avoid malware. After installation, launch the program.
  2. Insert the USB flash drive into the working PC. Make sure it is empty or that you have backed up any important files, because the tool will format it.
  3. In Windows Password Genius Advanced, select “Create Password Reset USB” (or similar wording). The interface may vary slightly by version, but the option is usually on the main screen.
  4. Choose your USB drive from the list and click “Start” or “Create”. The software will write the necessary boot files to the USB. Wait for the progress bar to finish — do not unplug the USB during this time.
  5. Once the USB is ready, safely eject it from the working PC.
  6. Plug the USB into your Surface. If your Surface has a USB-C port, you may need a USB-C to USB-A adapter if the drive is USB-A.
  7. Turn off the Surface completely. Press and hold the power button for about 10 seconds until the screen goes black.
  8. Boot from the USB drive. The method varies by Surface model:
    • For most Surface models (Pro, Laptop, Book): Press and hold the Volume Down button, then press and release the Power button. Keep holding Volume Down until the Windows logo appears or the “Choose an option” screen shows.
    • For Surface Go and Surface Pro X: Press and hold the Volume Up button, then press and release Power. Keep holding Volume Up until the boot menu appears.

    If the Surface boots to Windows normally, you missed the timing — repeat from step 7.

  9. When the boot menu appears, select the USB drive as the boot device. It may be listed as “USB Storage” or “UEFI: [USB name]”. Use the arrow keys to highlight it and press Enter.
  10. Windows Password Genius Advanced will load. It may take a minute. You will see a list of user accounts on the Surface.
  11. Select your user account (the one you are locked out of) from the list.
  12. Click “Reset Password” (or “Clear Password”). The software will remove the password for that account. Some versions ask you to set a new password — if so, type a new one and confirm.
  13. After the reset, click “Reboot” or “Restart”. Remove the USB drive when prompted.
  14. Your Surface will restart. If you cleared the password, you should be able to log in by just pressing Enter (or clicking the arrow) on the login screen. If you set a new password, enter that.

Common Mistakes

  • Using a USB drive that is too small — the tool needs at least 8 GB. A 4 GB drive may fail silently.
  • Not backing up the USB drive — the process formats the drive, erasing everything on it.
  • Incorrect boot button combination — holding the wrong volume button or not holding it long enough will boot to Windows normally.
  • Booting from the wrong device — if you have multiple USB ports or an SD card inserted, the Surface might try to boot from the wrong one.
  • Interrupting the USB creation process — unplugging the USB during writing can corrupt the bootable drive.
  • Selecting the wrong user account — if you have multiple accounts, choosing the wrong one will not help you get into your account.

Tips

  • Use a USB 3.0 drive for faster booting and writing.
  • Charge your Surface to at least 50% before starting, to avoid a shutdown during the reset.
  • Disable Secure Boot temporarily if the USB does not boot. On Surface, you can access UEFI by holding Volume Up + Power, then go to “Secure Boot Control” and set it to Disable. (Remember to re-enable it after resetting.)
  • Write down your new password or store it in a password manager to avoid this situation again.
  • If you use a Microsoft account, resetting the local password will not change your Microsoft account password — you may need to reset that online instead.

Troubleshooting

  • USB does not boot: Try a different USB port (preferably the one built into the Surface, not a dock). If you are using a USB-C to USB-A adapter, try a different one. Also, check that the USB was created correctly by testing it on another PC (boot from it to see if the tool loads).
  • “No account found” or empty list: This can happen if the Surface uses a Microsoft account rather than a local account. In that case, the password is stored online. You can reset it by going to account.live.com/password/reset from any device. The USB tool may still show a local account (like “Administrator”) — you can try resetting that, but it may not help with your Microsoft account login.
  • Boot loop after reset: If the Surface keeps restarting, try holding the power button for 20 seconds to force a shutdown, then turn it back on. If it still loops, boot from the USB again and choose “Repair” or “Startup Repair” if available.
  • USB is recognized but the tool crashes: Re-create the USB on a different computer, or try a different USB drive. Some USB drives have compatibility issues with the bootloader.
  • Surface still asks for password after reset: Make sure you selected the correct account. If you have multiple accounts, try resetting each one. Also, check if the “Require sign-in” option is set to “When PC wakes from sleep” — that may ask for a PIN or password even if the password is cleared. You can change that in Settings after logging in.

Frequently Asked Questions

Will this work on any Surface model?

Yes, as long as the Surface has a USB port (or you have a USB-C adapter) and you can boot from USB. This includes Surface Pro, Surface Laptop, Surface Book, Surface Go, and Surface Studio.

Do I need to know the current password?

No, the whole point is to reset it without knowing the current password. You only need physical access to the device and a working PC to create the USB.

Is this legal? Can I use it on someone else’s Surface?

It is legal to reset the password on a device you own. Using it on someone else’s device without permission is not allowed and could be illegal. Only use this on your own Surface.

Will resetting the password delete my files?

No, the password reset tool only changes the password. Your files, apps, and settings remain intact. However, if you have BitLocker encryption enabled, you may need your BitLocker recovery key to access the drive after the reset.

What if I have a Microsoft account instead of a local account?

If you log in with a Microsoft account, the password is managed online. You can reset it by visiting the Microsoft account recovery page from any device. The USB tool will not change your Microsoft account password, but it may allow you to access the local “Administrator” account if you need to get into the system.

How long does the whole process take?

Creating the USB takes about 5–10 minutes. Booting and resetting the password takes another 5–10 minutes. In total, expect around 15–20 minutes.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →