sodcalculator

10 Tech How-To

Reverse Tether Android: PC Internet to Phone

Guide 10-57751 · Updated · Step by step

Reverse tethering lets your Android phone use your computer’s internet connection instead of your mobile data or Wi-Fi. This is useful when your PC has a stable connection (Ethernet, Wi-Fi, or even a VPN) but your phone doesn’t, or when you want to save mobile data. You’ll need a Windows PC (Mac and Linux are possible but trickier), a USB cable, and a few minutes. This guide walks you through the most reliable method using USB tethering built into Android, plus a fallback using a third-party app.

What You’ll Need

  • An Android phone with USB tethering enabled (most phones have it under Settings > Network & Internet > Hotspot & Tethering).
  • A Windows PC (Windows 10 or 11 recommended) with internet access.
  • A USB cable that supports data transfer (not just charging).
  • ADB and Fastboot tools installed on your PC (for the manual method). You can download them from the Android developer website or use a package like Minimal ADB.
  • For the app method: a free app like Gnirehtet (reverse tethering) or Reverse Tethering (by Kitsunebi). These require ADB too.

Step-by-Step

Method 1: Using Built-in USB Tethering (Simplest, No Root)

  1. Enable Developer Options: Go to Settings > About Phone and tap “Build Number” 7 times until you see “You are now a developer.”
  2. Enable USB Debugging: Go to Settings > Developer Options and turn on “USB Debugging.”
  3. Connect your phone to your PC via USB. On your phone, allow the “Allow USB debugging” prompt if it appears.
  4. Open a command prompt or terminal on your PC and navigate to the folder where you have ADB installed (e.g., cd C:\adb).
  5. Test the connection: Type adb devices and press Enter. You should see your device listed with “device” status. If it says “unauthorized,” check your phone and allow the prompt.
  6. Enable reverse tethering: Type adb reverse tcp:8080 tcp:8080 and press Enter. This forwards your PC’s port 8080 to your phone’s port 8080. (You can use any port, but 8080 is common.)
  7. Configure your phone’s proxy: On your phone, go to Settings > Wi-Fi. Long-press the connected Wi-Fi network (if any) and select “Modify network.” If you’re not on Wi-Fi, you may need to enable Wi-Fi and connect to a network (even if it has no internet). Then set Proxy to “Manual” and enter 127.0.0.1 as the hostname and 8080 as the port. Save the changes.
  8. Test your connection: Open a browser on your phone and try to load a website. If it works, you’re done. If not, try the next method.

Method 2: Using Gnirehtet (No Root, More Reliable)

  1. Download Gnirehtet: Get the latest release from the official GitHub repository (search “Gnirehtet”). Extract the ZIP to a folder on your PC.
  2. Connect your phone and enable USB Debugging as described in Method 1.
  3. Open a command prompt in the Gnirehtet folder. Right-click inside the folder and choose “Open in Terminal” or “Command Prompt.”
  4. Run the command: Type gnirehtet run (on Windows, it’s gnirehtet-run.bat) and press Enter. This will install a small app on your phone and start the reverse tether automatically.
  5. Accept the VPN prompt: On your phone, you’ll see a notification asking to set up a VPN connection. Tap “OK” and allow it. This is how Gnirehtet routes your traffic.
  6. You’re connected! Your phone should now have internet access through your PC. You can verify by opening a browser or checking the status in the Gnirehtet app.

Method 3: Using a Third-Party App (Reverse Tethering)

  1. Download the app: Install “Reverse Tethering” from the Google Play Store (by Kitsunebi). It’s free and works without root.
  2. Enable USB Debugging as before.
  3. Connect your phone to PC and open the app. The app will guide you to download a small helper file on your PC.
  4. Follow the on-screen instructions: The app will ask you to run a .bat file on your PC. Do that, and it will set up the connection automatically.
  5. Accept the VPN prompt on your phone when it appears.
  6. Check your connection: The app shows a status indicator. If it says “Connected,” you’re good.

Common Mistakes

  • Using a charge-only USB cable: Many cables only carry power. Use the cable that came with your phone or one that’s known to support data.
  • Not enabling USB Debugging: Without it, ADB cannot communicate with your phone.
  • Forgetting to allow the USB debugging prompt: If you miss the prompt, your device shows as “unauthorized” in ADB.
  • Setting the proxy on the wrong network: Make sure you modify the network you’re actually connected to (or the one you’ll use).
  • Using a port that’s already in use: If you get an error like “bind: Address already in use,” try a different port (e.g., 8081).

Tips

  • Use a wired connection for best speed: If your PC is on Wi-Fi, reverse tethering will be limited by that Wi-Fi speed. Ethernet is more stable.
  • Keep your phone plugged in: Reverse tethering can drain your battery. Plug your phone into a charger or keep it connected to the PC.
  • For frequent use, create a shortcut: You can create a .bat file that runs the ADB command automatically.
  • If you use a VPN on your PC, it will be shared: Reverse tethering shares the PC’s network connection, so any VPN on the PC will also apply to your phone.
  • Disable mobile data on your phone: To ensure you’re using the PC’s internet, turn off mobile data in your phone’s settings.

Troubleshooting

  • “adb devices” shows unauthorized: Disconnect and reconnect your phone, then watch for the prompt on your phone and tap “Allow.” If it doesn’t appear, go to Developer Options and revoke USB debugging authorizations, then try again.
  • No internet after setting proxy: Make sure the ADB reverse command is still running (keep the command prompt open). Also, check that the proxy port matches exactly. Try using a different port like 8080.
  • Gnirehtet fails to start: Ensure you have the latest version and that your phone’s Android version is supported (Android 5.0+). Also, disable any existing VPN on your phone before running Gnirehtet.
  • Connection drops frequently: Try a different USB port on your PC (preferably USB 2.0). Also, make sure your phone’s screen stays on during the process – you can set screen timeout to 30 minutes temporarily.
  • Phone shows “Connected, no internet”: Check your PC’s internet connection. If your PC requires a login (e.g., captive portal), make sure you’re logged in. Also, try turning off Windows Firewall temporarily to see if it’s blocking the connection.

Frequently Asked Questions

Do I need root access?

No, all the methods described work without root. They use ADB and VPN-based routing, which are standard Android features.

Will this work on macOS or Linux?

Yes, ADB works on all platforms. The steps are similar, but the commands may differ slightly (e.g., use ./gnirehtet on Mac/Linux). The built-in USB tethering method also works, but you may need to install additional drivers.

Can I reverse tether over Wi-Fi instead of USB?

Technically, you can use ADB over Wi-Fi, but it’s more complex and less reliable. USB is recommended for stability and speed.

Is reverse tethering safe?

Yes, it’s a standard feature. However, be cautious when using third-party apps – only download from trusted sources like the Google Play Store or official GitHub repositories.

Why does my phone show a VPN notification?

Apps like Gnirehtet create a local VPN to route your traffic. This is normal and doesn’t mean your data is being sent to a remote server; it stays on your device.

Can I use this to share my PC’s internet with multiple devices?

No, reverse tethering is typically one-to-one. For multiple devices, you’d need to set up a hotspot on your PC or use a router.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →