sodcalculator

10 Tech How-To

Seagate External Drive Factory Reset Guide

Guide 10-46667 · Updated · Step by step

This guide walks you through resetting a Seagate external hard drive to its factory state. This process removes all data, partitions, and any software that came pre-installed, returning the drive to a clean, out-of-the-box condition. You will need a computer (Windows or Mac), the drive itself, and a USB cable. Before starting, understand that this is destructive—every file on the drive will be permanently erased, so back up anything you want to keep.

What You’ll Need

  • Your Seagate external hard drive
  • A computer with a working USB port
  • The USB cable that came with the drive (or a compatible one)
  • Administrator or root access to the computer
  • A backup of any files you want to keep (if applicable)

Step-by-Step

  1. Back up your data. Copy any important files from the Seagate drive to another storage device, such as your computer’s internal drive, a cloud service, or another external drive. Double-check the backup is complete before proceeding.
  2. Connect the drive. Plug the Seagate drive into your computer using the USB cable. Wait for the computer to recognize it. You should see it appear in File Explorer (Windows) or Finder (Mac).
  3. Open Disk Management (Windows) or Disk Utility (Mac).
    • Windows: Right-click the Start button and select “Disk Management.” Alternatively, press Win + X and choose “Disk Management.”
    • Mac: Open Finder, go to Applications > Utilities, and double-click “Disk Utility.”
  4. Identify your Seagate drive. In the list of disks, find the one that matches your Seagate drive’s capacity and model name. Be absolutely certain you have the right disk—selecting the wrong one will erase the wrong drive. The drive will typically be labeled with its brand and size (e.g., “Seagate BUP Slim BK 2TB”).
  5. Delete all partitions (Windows).
    • In Disk Management, right-click on each partition (the blue or black boxes) on your Seagate drive and select “Delete Volume…” for data partitions or “Delete Partition…” for system/utility partitions. Repeat until the disk shows as one large “Unallocated” space.
  6. Erase the drive (Mac).
    • In Disk Utility, select your Seagate drive from the sidebar (the top-level item, not the volume below it). Click the “Erase” button in the toolbar. Choose a format—for a drive used with both Mac and Windows, select “ExFAT”; for Mac-only, “APFS” or “Mac OS Extended (Journaled)”; for Windows-only, “NTFS” or “FAT32” (for drives under 32GB). Give the drive a name, then click “Erase.” This will remove all partitions and create a single new volume.
  7. Create a new volume (Windows).
    • Right-click on the “Unallocated” space and select “New Simple Volume…” Follow the wizard. Accept the default size, assign a drive letter, and choose a file system. For a drive that will be used on both Windows and Mac, select “exFAT”; for Windows-only, “NTFS”; for a drive under 32GB, “FAT32” is fine. Give the volume a label (name) and click “Finish.”
  8. Reinstall Seagate software (optional). Many Seagate drives ship with utilities like Seagate Toolkit or Dashboard. If you want these back, download them from Seagate’s official support website. This is not required for the drive to function as a basic storage device.
  9. Eject the drive safely. On Windows, click the “Safely Remove Hardware” icon in the system tray and select your drive. On Mac, drag the drive icon to the Trash (which changes to an Eject icon). Wait for the confirmation that it is safe to unplug, then disconnect the USB cable.

Common Mistakes

  • Selecting the wrong disk. The most serious error is wiping your computer’s internal drive instead of the external Seagate. Always verify the disk number, capacity, and model name before deleting or erasing anything.
  • Skipping the backup. Assuming you don’t need the data is a common way to lose files permanently. Even if the drive seems empty, check thoroughly.
  • Formatting with the wrong file system. Choosing NTFS on a drive you’ll use with a Mac limits you to read-only access on the Mac. Choosing exFAT is the safest cross-platform option.
  • Deleting only the visible partition. Some Seagate drives have hidden recovery or utility partitions. In Windows Disk Management, ensure you delete all partitions, including the small ones that may not have drive letters.
  • Unplugging during the process. Interrupting a format or partition operation can leave the drive in an unusable state. Always wait for the process to complete fully.

Tips

  • Use the manufacturer’s tool. Seagate provides a free utility called “SeaTools” that can perform a low-level format or secure erase. This can be more thorough than the OS tools and is designed specifically for Seagate drives.
  • Quick format vs. full format. A quick format (the default) only removes the file system structures, making data recovery possible with specialized software. A full format (unchecking “Quick Format” on Windows) writes zeros to the entire drive, making recovery nearly impossible. Use a full format if you are selling or disposing of the drive.
  • Check the drive’s health. After resetting, run SeaTools’ “Long Generic” test to verify the drive has no bad sectors. If errors appear, the drive may be failing.
  • Keep the drive plugged in. Avoid using a USB hub; connect directly to a port on the computer to prevent power drops during the format.

Troubleshooting

  • The drive doesn’t appear in Disk Management/Disk Utility. Try a different USB port or cable. If it still doesn’t show, the drive may have a hardware issue. On Windows, check Device Manager for unrecognized devices. On Mac, check System Information > USB. If the drive appears but shows as “uninitialized” or “unknown,” right-click it and select “Initialize Disk” (Windows) before creating partitions.
  • Windows says “The device is not ready” or “The parameter is incorrect.” This often means the drive’s partition table is corrupted. In Disk Management, delete all partitions and create a new one. If that fails, use the diskpart command in an elevated command prompt: type diskpart, then list disk, find your disk number, select disk X, clean, and exit. Then create a new volume in Disk Management.
  • Disk Utility’s Erase button is greyed out. You may have selected the volume instead of the whole disk. Click the top-level entry in the sidebar (usually shows the manufacturer and capacity). If it’s still greyed out, the drive may be mounted; click the eject icon next to it first, then try again.
  • The format fails midway. This can indicate a failing drive or a bad USB connection. Try a different cable and port. If it fails repeatedly, run SeaTools to check the drive’s health. If the drive is under warranty, contact Seagate support for a replacement.
  • The drive is recognized but shows 0 bytes or no media. This usually means the drive’s firmware or partition table is damaged. Try the diskpart clean method above. If that doesn’t work, the drive may need professional recovery or replacement.

Frequently Asked Questions

Will this remove the pre-installed Seagate software?

Yes, deleting all partitions removes any recovery or utility partitions that contain the bundled software. The drive will function as a plain storage device. You can reinstall the software from Seagate’s website if you want it back.

What is the best file system for my Seagate drive?

For a drive used with both Windows and Mac, use exFAT. For Windows-only use, NTFS is ideal. For Mac-only use, APFS (if you’re on macOS 10.13 or later) or Mac OS Extended (Journaled) works well. FAT32 is only recommended for drives under 32GB or for compatibility with older devices like game consoles.

Can I recover data after a factory reset?

If you performed a quick format, data recovery software may be able to retrieve some files, though it’s not guaranteed. If you did a full format or secure erase, recovery is virtually impossible. Always back up before resetting.

Why does my Seagate drive show two drives in File Explorer?

Many Seagate drives ship with a small utility partition (often ~100MB) alongside the main data partition. This is normal. The factory reset process removes both, leaving a single partition.

How long does the reset take?

A quick format takes a few seconds to a minute. A full format can take several hours depending on the drive’s size and speed. Partition deletion is usually instant, but creating a new volume takes a few seconds.

Do I need to install any drivers before resetting?

No. Windows and macOS have built-in drivers for standard USB mass storage devices. The drive should be recognized automatically. If it isn’t, check your USB ports and cables first.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →