Setting multiple timers on an iPhone lets you track several tasks at once—like boiling eggs while doing laundry or timing different workout intervals—without juggling a single countdown. You can run several timers simultaneously, name each one, and manage them from the Lock Screen, Control Center, or the Timer tab in the Clock app. This guide walks you through creating, naming, and controlling multiple timers, plus what to do when things don’t go as expected.
What You’ll Need
- An iPhone running iOS 16 or later (multiple timers were introduced in iOS 16). To check, go to Settings > General > About and look at the iOS version.
- The Clock app, which is pre-installed and cannot be deleted.
- Optional: An Apple Watch (running watchOS 9 or later) if you want to start and see timers from your wrist.
Step-by-Step
- Open the Clock app on your iPhone. It’s usually on the Home Screen or in a folder called “Utilities.”
- Tap the “Timer” tab at the bottom right of the screen. This opens the timer interface where you can set a countdown.
- Set your first timer by spinning the hour, minute, and second wheels to your desired duration. For example, to set 10 minutes, scroll the minute wheel to 10 and leave seconds at 0.
- Add a label (optional but recommended): Tap “Label” (or “When Timer Ends” on some versions) and choose a preset like “Eggs” or type a custom name using the keyboard. This helps you identify each timer when multiple are running.
- Choose a sound (optional): Tap “Sound” and pick a tone, or select “Radar” or “None” if you prefer silence. You can also set “Stop Playing” to pause any audio playing on your iPhone when the timer ends.
- Tap “Start” to begin the first timer. It will immediately start counting down.
- Add another timer: While the first timer is running, tap the “+” icon in the top right corner of the Timer screen. This opens a new timer interface.
- Set the second timer using the same wheels, label it, and choose a sound if you like. Then tap “Start.”
- Repeat for additional timers: You can add as many timers as you need—there’s no practical limit. Each new timer gets its own row in the list below the main timer display.
- Manage running timers: All active timers appear in a list. Each shows its name, remaining time, and a circular progress ring. You can tap any timer to expand it and see the full countdown, or swipe left on it and tap “Delete” to remove it (this stops the timer).
- Use Control Center for quick access: Swipe down from the top-right corner (or up from the bottom on older iPhones) to open Control Center. Tap the Timer icon (a small clock with a plus) to see all running timers and add new ones without opening the Clock app.
- Lock Screen live view: When you lock your iPhone, active timers appear on the Lock Screen as live activities (if supported). You can tap one to expand it and pause or stop it directly from the Lock Screen.
- Pause or stop a timer: Tap any timer in the list to open its detail view. Tap “Pause” to temporarily stop it, then “Resume” to continue. Tap “Cancel” to stop it completely.
Common Mistakes
- Not labeling timers: If you set multiple timers without names, you’ll see a list of identical countdowns and won’t know which is which. Always label each timer, even if it’s just “Timer 1,” “Timer 2,” etc.
- Confusing the Timer tab with the Stopwatch: The Stopwatch counts up and doesn’t alert you. Make sure you’re on the Timer tab (bottom right) when setting countdowns.
- Expecting timers to sync with Apple Watch: Timers set on your iPhone will appear on your Apple Watch if both are connected, but timers started on the Watch are separate and won’t show on the iPhone unless you start them from the Watch’s Timer app and they sync (which they do automatically). However, you can’t manage iPhone timers from the Watch’s Timer app—only view them.
- Deleting a timer instead of stopping it: Swiping left and tapping “Delete” removes the timer entirely. If you just want to stop it, tap the timer and hit “Cancel”—that stops it but keeps it in the list so you can reuse it.
Tips
- Use Siri: You can say “Hey Siri, set a 5-minute timer” and Siri will create a timer named “Timer” by default. To name it, say “Hey Siri, set a 5-minute timer called Pasta.” Siri can also start multiple timers in sequence.
- Reuse a timer: After a timer finishes, it stays in the list with its label and duration. Tap the “Repeat” arrow (circular arrow icon) next to it to start it again instantly.
- Adjust while running: You can change the duration of a running timer by tapping it, then dragging the wheels to a new time. The timer will update immediately.
- Set a default timer: If you always use the same duration, set it once and then just tap “Start” next time—the Clock app remembers your last used duration.
- Use the “Stop Playing” feature: If you’re listening to music or a podcast, set a timer with “Stop Playing” as the sound. When the timer ends, it will pause your audio—useful for falling asleep.
Troubleshooting
- No “+” icon or can’t add a second timer: This feature requires iOS 16 or later. If you don’t see the plus icon, update your iPhone via Settings > General > Software Update. Also, make sure you’re on the Timer tab, not the Stopwatch.
- Timers not showing on Lock Screen: Live Activities must be enabled for the Clock app. Go to Settings > Clock and ensure “Live Activities” is toggled on. Also, check that your iPhone supports Live Activities (iPhone XS and later).
- Timer sound doesn’t play: Check that your ringer volume isn’t muted (the silent switch on the side should not be orange). Also, ensure the timer’s sound isn’t set to “None.” If you have “Stop Playing” selected, the timer will stop audio but may not play a sound—set a sound if you want an alert.
- Timer list is cluttered: Finished timers stay in the list. Swipe left on any timer (finished or not) and tap “Delete” to remove it. You can also tap “Edit” in the top left corner to manage multiple timers at once.
- Can’t see timers on Apple Watch: Make sure both devices have Bluetooth and Wi-Fi on, and that they’re within range. Open the Watch app on your iPhone, go to “Clock,” and ensure “Timers” is enabled for the complication. Timers from your iPhone should appear automatically on the Watch’s Timer app.
Frequently Asked Questions
Can I set multiple timers using Siri?
Yes. Say “Hey Siri, set a 10-minute timer” and it will create a timer. You can add another by saying “Hey Siri, set a 5-minute timer called Nap.” Siri can also start multiple timers in one command: “Set a 10-minute timer and a 5-minute timer.”
Is there a limit to how many timers I can set?
No official limit is documented. In practice, you can add as many as you want—dozens—without issue. The list scrolls, and each timer runs independently.
Can I set a timer that counts up instead of down?
The Timer tab only counts down. For counting up, use the Stopwatch tab. If you need a count-up with an alarm at a specific time, use the Alarm tab instead.
Do timers continue running if I close the Clock app or restart my phone?
Timers continue running in the background even if you close the Clock app. If you restart your iPhone, timers are preserved and will continue counting down after boot. However, if you force-quit the Clock app (swipe it away in the app switcher), timers may stop—Apple’s behavior here is inconsistent, so it’s best to leave the Clock app in the background.
Can I share a timer with someone else?
No, timers are local to your iPhone and cannot be shared or synced to another person’s device. You can only see your own timers on your own devices.
Why did my timer not go off when the screen was locked?
If the timer sound didn’t play, check the ringer volume and the silent switch. Also, ensure the timer’s sound is not set to “None.” If you have “Stop Playing” selected, it only stops audio—it doesn’t play a sound. Set a distinct sound for important timers.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Error 0x8007025d in Windows 10
- Fix Alexa App Stuck on Setup
- Android Camera for 7 Office Tasks: Step-by-Step
- Pair Phone to Pioneer Stereo After Bluetooth Reset
- Fix Windows Not Saving Remote Desktop Credentials
- Essential Tips for macOS Users Switching to Windows