This guide walks you through the essential first steps after building or unboxing a new gaming desktop: installing the correct drivers and configuring Windows for better performance, lower latency, and fewer crashes. You will learn the order in which to install drivers, which settings matter most in Windows 11, and how to avoid the common pitfalls that leave performance on the table.
What You’ll Need
- Your new gaming desktop, plugged in and connected to a monitor, keyboard, and mouse
- A stable internet connection (Ethernet cable preferred over Wi-Fi for the initial setup)
- Your Windows product key if you are installing the OS yourself (most prebuilt PCs have it already activated)
- Access to a second device (phone or laptop) to download drivers if the network adapter is not working out of the box
- A USB flash drive (8 GB or larger) if you need to transfer drivers from another computer
Step-by-Step
- Finish Windows installation and connect to the internet. If your PC did not come with Windows preinstalled, install it from a USB drive. During setup, choose “I don’t have internet” only if you must; otherwise, connect via Ethernet. Windows will install basic drivers automatically, but you will replace most of them in the next steps.
- Run Windows Update repeatedly. Open Settings > Windows Update and click Check for updates. Install everything offered, then restart and check again. Repeat until no new updates appear. This installs chipset, storage, and network drivers that Microsoft has validated. Do not skip this step—it prevents many blue-screen errors later.
- Install the chipset driver from your motherboard manufacturer. Go to the support page for your exact motherboard model (e.g., ASUS, MSI, Gigabyte, ASRock) and download the latest chipset driver. Run the installer, restart, then move on. This driver manages PCIe lanes, USB ports, and power management—it is the foundation for everything else.
- Install the graphics card driver. Go to NVIDIA (for GeForce cards) or AMD (for Radeon cards) and download the latest Game Ready or Adrenalin driver. During installation, choose Custom and check Perform a clean installation. This removes old driver files that can cause instability. Restart after the install finishes.
- Install the audio driver. Most modern motherboards use Realtek or ALC codecs. Download the audio driver from your motherboard’s support page, not from a third-party site. If Windows already shows a working audio device, you can skip this step, but a fresh install of the manufacturer’s driver often fixes crackling or missing surround sound options.
- Update the BIOS (optional but recommended). Check your motherboard’s support page for the latest BIOS version. If the version listed is newer than what you have (check in BIOS or via CPU-Z), download it, put it on a FAT32-formatted USB stick, and use the motherboard’s built-in flash tool (often called EZ Flash or Q-Flash). Do not update BIOS during a thunderstorm or while the power could cut out.
- Turn on Game Mode and Hardware-Accelerated GPU Scheduling. In Windows, go to Settings > Gaming > Game Mode and ensure it is On. Then go to Settings > System > Display > Graphics > Change default graphics settings and turn on Hardware-accelerated GPU scheduling and Variable refresh rate if your monitor supports it. Restart.
- Set the power plan to High Performance (or Ultimate Performance). Open Control Panel, search “power plan,” and select High Performance. On some systems, you can enable Ultimate Performance by running
powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61in an elevated Command Prompt. This prevents the CPU from downclocking during short game loads. - Disable Xbox Game Bar overlays and background recording. In Settings > Gaming > Captures, turn off Record in the background while I’m playing a game. Also disable the Game Bar itself if you do not use it, as it can cause stutter in some titles.
- Verify your RAM runs at its rated speed (XMP/EXPO). Restart your PC and enter the BIOS (usually by pressing Delete or F2 during boot). Look for a setting called XMP (Intel) or EXPO (AMD). Enable it, save, and exit. This makes your memory run at its advertised speed instead of the slower default JEDEC speed. Check with CPU-Z or Task Manager after booting to confirm.
- Install the latest drivers for any peripherals. If your keyboard, mouse, or headset has software (e.g., for RGB or macros), download it from the manufacturer’s site. Do not install optional bloatware like trial antivirus or “game boosters” that come on driver CDs—they often cause more problems than they solve.
- Run a stability test. Download a free tool like Cinebench (CPU) and FurMark (GPU) and run them for 10–15 minutes while monitoring temperatures with HWiNFO. If temperatures exceed 95°C on the CPU or 85°C on the GPU, check your case airflow and cooler mounting before gaming.
Common Mistakes
- Installing drivers from a CD or third-party site. Driver CDs are outdated the day they are pressed. Always download from the component manufacturer’s official site or Windows Update.
- Installing the GPU driver before the chipset driver. This can cause random crashes and poor USB performance. Stick to the order above.
- Skipping Windows Update. Many “new PC” blue screens are simply missing cumulative updates. Let it run fully before gaming.
- Forgetting to enable XMP/EXPO. Your RAM will run at 2133 MHz or 2400 MHz instead of 3600 MHz+, costing 5–10% FPS in CPU-bound games.
- Using “Game Booster” or “Driver Updater” software. These tools often install outdated or incorrect drivers and can inject ads. Stick to manual downloads.
- Not doing a clean GPU driver install. If you previously had an AMD card and now have NVIDIA (or vice versa), leftover files cause crashes. Always check “clean installation” during setup.
Tips
- Create a system restore point after all drivers are installed. In Control Panel search “restore point,” create one. If a future update breaks something, you can roll back in minutes.
- Use the manufacturer’s tool for GPU driver updates. NVIDIA GeForce Experience or AMD Software Adrenalin can notify you of new drivers, but manually downloading from the site is equally fine.
- Keep your monitor’s refresh rate set correctly. Right-click the desktop, go to Display settings > Advanced display, and set the refresh rate to your monitor’s maximum (e.g., 144 Hz or 165 Hz). Many new PCs default to 60 Hz.
- Disable fullscreen optimizations for older games. Right-click the game’s .exe, go to Properties > Compatibility, and check “Disable fullscreen optimizations.” This fixes stutter in some DirectX 9/10 titles.
- Set a custom fan curve. Use your motherboard’s software (e.g., Fan Control, or the BIOS) to make fans ramp up earlier. This keeps temperatures lower and boosts sustained clock speeds.
Troubleshooting
No display after installing GPU driver. Boot into Safe Mode (hold Shift while clicking Restart, then troubleshoot > advanced options > startup settings). Uninstall the GPU driver, then reinstall with the clean option.
Network adapter not recognized. If Windows Update cannot find a driver, download the LAN driver from your motherboard’s support page on another device, transfer it via USB, and install it manually.
Blue screen (BSOD) during gaming. Note the error code. Common ones: IRQL_NOT_LESS_OR_EQUAL (driver issue) or MEMORY_MANAGEMENT (RAM issue). Update all drivers first, then run Windows Memory Diagnostic (search “memory diagnostic” in Start).
Games stutter despite high FPS. Check your monitor’s refresh rate setting (see Tips). Also disable any overlay (Discord, GeForce Experience, Steam) and check that your RAM is running at the XMP speed.
Audio crackling or no sound. Go to Device Manager, expand “Sound, video and game controllers,” right-click your audio device, and select “Update driver” > “Browse my computer” > “Let me pick” > choose the High Definition Audio Device. If that fails, reinstall the motherboard audio driver.
PC restarts under load. This is usually a power supply issue. Check that your PSU wattage is sufficient for your GPU and CPU. If it is, the PSU may be faulty—test with a different unit if possible.
Frequently Asked Questions
Q: Do I need to install drivers for my SSD or HDD?
A: No. Modern NVMe and SATA drives are plug-and-play. Windows includes the standard storage drivers. Only install a manufacturer’s NVMe driver if you are experiencing specific issues like low sequential read speeds.
Q: How often should I update my GPU driver?
A: For new game releases, update when the game’s patch notes mention driver optimizations. Otherwise, once a month is plenty. You do not need to update every week—newer is not always better for stability.
Q: Is it safe to update the BIOS?
A: Yes, if you follow the manufacturer’s instructions exactly and have a stable power supply. Do not update it just because a new version exists; only update if it fixes a specific issue you have or adds CPU support you need.
Q: Should I disable Windows Defender for gaming?
A: No. Windows Defender has minimal performance impact. Disabling it leaves you vulnerable. Instead, add your game folders to the exclusion list in Windows Security to prevent real-time scanning during installs.
Q: Why is my RAM showing 2133 MHz when I bought 3600 MHz?
A: This is normal until you enable XMP (Intel) or EXPO (AMD) in the BIOS. The motherboard runs memory at a conservative speed by default for stability. Follow Step 10 in this guide to enable the rated speed.
Q: Do I need to install the motherboard’s RGB software?
A: Only if you want to control the RGB lighting. If you do not care about lighting effects, skip it—it runs in the background and can occasionally cause minor stutter. You can always install it later.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone