Marshall Bromley 150 Bluetooth Pairing Guide

This guide walks you through setting up and pairing the Marshall Bromley 150 speaker with Bluetooth devices like smartphones, tablets, and laptops. We’ll cover the initial power-on, entering pairing mode, connecting from your device, and fixing common issues.

What You’ll Need

Marshall Bromley 150 speaker
Power cable (to charge or plug in the speaker)
A Bluetooth-enabled device (phone, tablet, computer)

Step-by-Step

Power on the speaker. Connect the power cable to the speaker and a wall outlet, or ensure it’s charged. Press the power button (usually located on the top or back) until the LED indicator lights up.
Enter pairing mode. On first power-on, the speaker may automatically enter pairing mode (indicated by a blinking Bluetooth LED). If not, press and hold the Bluetooth button (often marked with the Bluetooth symbol) for about 2-3 seconds until the LED starts flashing rapidly. This means the speaker is discoverable.
Open Bluetooth settings on your device. On your phone, tablet, or computer, go to the Bluetooth settings menu. Make sure Bluetooth is turned on.
Scan for devices. Your device will search for nearby Bluetooth devices. Look for “Marshall Bromley 150” in the list of available devices. It may take a few seconds to appear.
Select and pair. Tap or click on “Marshall Bromley 150”. Your device may ask for a PIN or confirmation—if so, use “0000” or simply confirm the pairing request. The speaker’s LED will stop flashing and stay solid (or change color) once connected.
Confirm audio output. Once paired, play some audio from your device to make sure it comes through the speaker. If not, check that the speaker is selected as the audio output device in your device’s sound settings.

Common Mistakes

Not putting the speaker in pairing mode: Many users assume the speaker is discoverable just because it’s on. You must actively enter pairing mode by pressing the Bluetooth button.
Forgetting to enable Bluetooth on your device: Ensure Bluetooth is turned on in your device’s settings before searching.
Connecting to a previously paired device: If the speaker was paired before, it may automatically connect to that device instead of being discoverable. Turn off Bluetooth on the old device or unpair it.
Ignoring the LED indicator: The LED tells you the state: solid (connected), slow blink (pairing mode), fast blink (discoverable). Misreading it can lead to confusion.

Tips

Keep devices close: Stay within 30 feet (10 meters) of the speaker during pairing to avoid interference.
Charge the speaker: A low battery can cause pairing issues. Ensure the speaker has enough charge before starting.
Reset if needed: If you’re having trouble, try resetting the speaker (see Troubleshooting below). This clears all previous pairings.
Update your device’s OS: Sometimes Bluetooth issues are due to outdated software on your phone or computer. Check for updates.
Use the speaker’s multi-point feature: If your model supports it, you can pair two devices at once. Check the manual for how to switch between them.

Troubleshooting

Speaker not showing up in device list: Make sure the speaker is in pairing mode (LED flashing fast). If not, turn it off and on again, then try again. Also, check that you’re not connected to another device.
Pairing fails or drops connection: Move the speaker and device closer together, and away from other wireless devices (Wi-Fi routers, microwaves). Turn both off and on again, then retry.
No sound after pairing: Check the volume on both the speaker and your device. Also, make sure the speaker is selected as the audio output in your device’s sound settings (especially on Windows or macOS).
Speaker connects but audio is choppy: This is often due to interference or distance. Move closer, and avoid obstacles between the speaker and device.
Reset the speaker: If all else fails, reset the speaker to factory defaults. Usually, this involves holding down the Bluetooth and power buttons simultaneously for about 5 seconds until the LED flashes red. Then try pairing again.

Frequently Asked Questions

How do I put the Marshall Bromley 150 into pairing mode?

Press and hold the Bluetooth button (marked with the Bluetooth symbol) for about 2-3 seconds until the LED starts flashing rapidly. This indicates the speaker is discoverable.

Can I pair multiple devices at once?

Yes, many Marshall speakers support multi-point pairing, allowing you to connect two devices simultaneously. However, you can only play audio from one at a time. To switch, pause audio on the current device and play on the other.

Why won’t my phone find the speaker?

Ensure the speaker is in pairing mode (LED flashing fast), Bluetooth is enabled on your phone, and you’re within range. Also, check that the speaker isn’t already connected to another device.

How do I reset the Marshall Bromley 150?

To reset, press and hold the Bluetooth and power buttons together for about 5 seconds until the LED flashes red. This clears all paired devices and restores factory settings.

Does the speaker work with non-Bluetooth devices?

Yes, the Marshall Bromley 150 typically has a 3.5mm auxiliary input. Use an audio cable to connect devices without Bluetooth.

How do I disconnect a device from the speaker?

You can either turn off Bluetooth on your device, or press the Bluetooth button on the speaker to disconnect the current device and enter pairing mode for a new one.

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →