sodcalculator

10 Tech How-To

How to Set Up Multiple Faces for Face ID in iOS 12

Guide 10-55834 · Updated · Step by step

Face ID on iOS 12 normally stores a single face, but you can add a second one (an “Alternate Appearance”) so a partner, family member, or your own different look (hat, glasses, beard) can unlock your iPhone. This guide walks you through the setup, what to avoid, and how to fix common issues.

What You’ll Need

  • An iPhone or iPad Pro with Face ID (iPhone X or later, iPad Pro 3rd generation or later).
  • iOS 12 or later installed.
  • Your passcode (you’ll need it to confirm changes).
  • The second person physically present with you, or your own alternate look ready (e.g., glasses, hat, or makeup).

Step-by-Step

  1. Open Settings. Tap the gray gear icon on your home screen.
  2. Go to Face ID & Passcode. Scroll down and tap “Face ID & Passcode.” Enter your device passcode when prompted.
  3. Tap “Set Up an Alternate Appearance.” This option is directly below the main “Set Up Face ID” section. It won’t replace your primary face; it adds a second one.
  4. Position the device. Hold your iPhone/iPad about 10–20 inches from the face you’re adding, with the TrueDepth camera (the notch or top bezel) pointing at that face. Make sure the face is well-lit and centered in the frame.
  5. Move your head slowly. When the scan starts, gently rotate your head in a circle, keeping your eyes open and looking at the camera. Follow the on-screen animation until the first pass completes.
  6. Complete the second scan. The device will ask you to reposition slightly (e.g., “Move your head a little to the right”) and then do a second scan. Follow the prompts.
  7. Confirm with your passcode. After both scans finish, you’ll be asked to enter your passcode to save the alternate appearance. Do so, and you’re done.
  8. Test it. Lock your device and have the second person (or your alternate look) try to unlock it. If it fails, redo the setup in better lighting or with fewer obstructions.

Common Mistakes

  • Using the same face twice. Apple’s system may reject a second scan of the same face, or it may overwrite the primary. The alternate appearance is meant for a different person or a dramatically different look.
  • Poor lighting. Too dark or too bright (e.g., direct sunlight) can cause the scan to fail or produce a weak match later.
  • Covering the face. Sunglasses, heavy scarves, or face masks that cover the eyes/nose/mouth will prevent a successful scan. Remove them for setup, and later unlock may require removing them unless you’ve trained the alternate with them on.
  • Moving too fast. If you jerk your head or move out of frame, the scan will abort. Move slowly and steadily.
  • Not entering the passcode. If you skip the passcode confirmation, the alternate appearance may not be saved. Always complete that final step.

Tips

  • Use it for a partner or child. The most common use is adding a spouse or older child so they can unlock your phone without your passcode.
  • Train for glasses or hats. If you want Face ID to work with your favorite sunglasses, set up the alternate appearance while wearing them. The same goes for a hat or heavy makeup.
  • Keep lighting consistent. Face ID works best in the same lighting conditions you trained in. If it fails at night, consider redoing the scan in dimmer light.
  • You can reset anytime. Go to Settings > Face ID & Passcode > “Reset Alternate Appearance” to clear it and start over.
  • Security note. Anyone you add gets full access to your phone, including payments and passwords. Only add people you trust completely.

Troubleshooting

If the scan fails repeatedly:

  • Clean the TrueDepth camera (the small lens area) with a soft, dry cloth.
  • Move to a brighter area, but avoid direct sunlight.
  • Remove any face coverings (hats, glasses, masks) and try again.
  • Restart your iPhone (hold the side button and either volume button, then slide to power off).

If the alternate appearance doesn’t unlock reliably:

  • Delete the alternate and redo it, making sure the person’s face is fully visible and centered.
  • Try a second time with different lighting (e.g., indoor vs. outdoor).
  • If the person wears glasses, train the alternate with those glasses on.

If Face ID stops working entirely after adding an alternate:

  • Go to Settings > Face ID & Passcode, enter your passcode, and tap “Reset Face ID.” Then set up both faces from scratch.
  • Check for a software update (Settings > General > Software Update) – some early iOS 12 bugs were fixed in later releases.

Frequently Asked Questions

Can I add more than two faces?
No, iOS 12 only supports one primary face and one alternate appearance. That’s a total of two faces.

Will adding a second face make Face ID less secure?
It slightly increases the chance of a false match (someone else unlocking your phone), but the probability is still extremely low (about 1 in 1,000,000). Apple designed it to be safe for most users.

Can I use the alternate appearance for my own face with a different look?
Yes, you can set it up with a hat, glasses, or makeup. But note that it may not work if you change that look drastically later.

Does the alternate appearance work for Apple Pay and App Store purchases?
Yes, both faces can authorize payments and purchases, as long as the device is unlocked with that face.

What if I want to remove the alternate appearance?
Go to Settings > Face ID & Passcode, enter your passcode, and tap “Reset Alternate Appearance.” Your primary face remains.

Will Face ID work with a mask?
No, Face ID requires your eyes, nose, and mouth to be visible. It does not work with a mask covering the lower face, even with an alternate appearance.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →