When Windows suddenly has no sound and the volume icon shows an error, the Windows Audio service has likely stopped or failed to start. This guide walks you through restarting the service, fixing its dependencies, and resolving common causes so your audio works again.
What You’ll Need
- Administrator access to the Windows PC (to change service settings).
- Basic familiarity with the Services window (services.msc) and Device Manager.
Step-by-Step
- Restart the Windows Audio service. Press Win + R, type
services.msc, and press Enter. Scroll down to Windows Audio. Right-click it and select Restart. If Restart is grayed out, click Start instead. Check if sound works now. - Set the service to start automatically. Right-click Windows Audio again, choose Properties. Under the General tab, set Startup type to Automatic. Click Apply, then OK.
- Restart the Windows Audio Endpoint Builder. In the same Services window, find Windows Audio Endpoint Builder. Right-click and choose Restart. This service manages audio devices and often causes the main service to fail if it’s stopped.
- Check the service dependencies. In the Windows Audio Properties window, go to the Dependencies tab. Note the services listed (usually Plug and Play, Power, and Remote Procedure Call (RPC)). Make sure each of these is running (right-click and Start if not).
- Run the audio troubleshooter. Go to Settings > System > Sound > Troubleshoot (or search “audio troubleshooter” in the Start menu). Follow the prompts; Windows will attempt to detect and fix issues automatically.
- Restart the PC. If the above steps don’t work, a full restart can clear temporary glitches that keep the service from starting properly.
- Update or reinstall the audio driver. Press Win + X and select Device Manager. Expand Sound, video and game controllers. Right-click your audio device (e.g., Realtek High Definition Audio) and select Update driver > Search automatically. If no update is found, right-click again and choose Uninstall device, then restart the PC – Windows will reinstall the driver automatically.
Common Mistakes
- Only restarting the main service without the Endpoint Builder. The Windows Audio service depends on the Endpoint Builder; if that one is stuck, the main service will fail again.
- Setting the startup type to “Automatic (Delayed Start)”. This can cause the service to start too late, leading to the same error. Use Automatic instead.
- Ignoring the RPC service. If Remote Procedure Call (RPC) is disabled or stopped, Windows Audio cannot start. Ensure it’s set to Automatic and running.
- Forgetting to run as administrator. If you don’t have admin rights, you won’t be able to change service properties or restart them. Make sure you’re logged in as an administrator.
Tips
- Use the Services window’s Recovery tab to automatically restart the service if it fails. Set “First failure” to Restart the Service.
- Keep your audio drivers updated through Windows Update or the manufacturer’s website, but avoid third-party “driver updater” tools.
- If you recently installed new software that changed audio settings, try a System Restore point from before the issue began.
- Check if the Windows Audio service is being stopped by a policy or security software; temporarily disable such software to test.
Troubleshooting
If the service still won’t start, try these advanced steps:
- Check the Event Viewer. Press Win + R, type
eventvwr.msc, and go to Windows Logs > System. Look for errors from “Service Control Manager” or “Windows Audio” around the time of failure. The error details may point to a specific missing file or dependency. - Run SFC and DISM. Open Command Prompt as administrator and run
sfc /scannow. If that finds issues, runDISM /Online /Cleanup-Image /RestoreHealth. Corrupted system files can break the audio service. - Check the audio device in Device Manager. If the device shows a yellow warning icon, right-click it and select Properties to see the error code. A code 28 (no drivers) or 10 (cannot start) often requires a driver reinstall.
- Verify the service’s log-on account. In the Windows Audio Properties, the Log On tab should show “Local System Account”. If it’s changed, reset it and restart the service.
- Boot into Safe Mode. Restart the PC, hold Shift while clicking Restart, then go to Troubleshoot > Advanced options > Startup Settings > Restart, and press 4 for Safe Mode. If the service starts there, a third-party service or driver is interfering.
- Use the System File Checker in Safe Mode if normal mode fails.
Frequently Asked Questions
Why does “Audio Service is not running” keep appearing?
This error appears when the Windows Audio service is stopped or disabled. Common causes include driver conflicts, corrupted system files, or another program stopping the service.
Can I fix this without admin rights?
No, you need administrator privileges to start or change the service settings. Contact the system administrator if you don’t have them.
Will restarting the service delete my sound settings?
No, restarting the service only stops and starts the audio system. Your device configuration and volume levels remain intact.
What if the service starts but there is still no sound?
Check that the correct playback device is set as default (right-click the speaker icon > Sounds > Playback tab). Also, test with headphones to isolate a hardware issue.
Does this work on all Windows versions?
Yes, the steps apply to Windows 10 and Windows 11. The Services window and Device Manager are essentially the same in both versions.
Is it safe to reinstall the audio driver?
Yes, uninstalling the driver from Device Manager and restarting is a standard fix. Windows will automatically reinstall a compatible driver.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone