sodcalculator

10 Tech How-To

iPhone Touchscreen: Software or Hardware Issue?

Guide 10-52261 · Updated · Step by step

This guide helps you figure out whether your iPhone’s touchscreen problem is caused by a software glitch or a hardware failure. Knowing the difference matters because software issues can often be fixed at home in a few minutes, while hardware problems typically require a repair from Apple or an authorized service provider. Before you start, make sure your iPhone is charged above 50% and back up your data to iCloud or a computer, just in case.

What You’ll Need

  • Your iPhone
  • A computer with the latest version of iTunes or Finder (for a full restore, if needed)
  • A clean, soft, dry microfiber cloth
  • A toothpick or SIM eject tool (for cleaning ports, optional)
  • A stable Wi-Fi connection

Step-by-Step

  1. Clean the screen and your hands. Dirt, oil, or moisture on the screen or your fingers can cause erratic touch behavior. Wipe the screen with a dry microfiber cloth. Wash and dry your hands completely. Remove any screen protector if it’s cracked, peeling, or visibly dirty.
  2. Remove the case and any magnetic accessories. Some cases, especially those with magnets or metal plates for mounts, can interfere with the touchscreen’s digitizer. Take the case off and test the screen bare. Also remove any magnetic wallet, PopSocket, or ring holder attached to the back.
  3. Restart your iPhone. A simple restart clears temporary software glitches. For iPhones with Face ID: press and hold the side button and either volume button until the power off slider appears. For iPhones with a Home button: press and hold the side or top button. Drag the slider, wait 30 seconds, then press and hold the side/top button until the Apple logo appears.
  4. Force restart if the screen is unresponsive. If the touchscreen is completely dead and you can’t swipe to power off, do a force restart. For iPhone 8 or later: press and release Volume Up, press and release Volume Down, then press and hold the Side button until the Apple logo appears. For iPhone 7/7 Plus: hold the Side and Volume Down buttons together. For iPhone 6s and earlier: hold the Home and Top/Side buttons together.
  5. Update iOS. Go to Settings > General > Software Update. If an update is available, install it. Apple regularly fixes touch-related bugs in iOS updates. Make sure your iPhone is connected to Wi-Fi and plugged into power before updating.
  6. Test in Safe Mode (if possible). iPhones don’t have a true safe mode, but you can simulate it by disabling widgets and reducing motion. Go to Settings > Accessibility > Motion and turn on Reduce Motion. Also, remove all widgets from the Today View (swipe right on the Home screen, scroll to bottom, tap Edit, and remove all). If the problem goes away, a third-party widget or app is likely the culprit.
  7. Check for app-specific issues. If the touchscreen problem only happens in one app, that app may be buggy. Force close the app (swipe up from the bottom and hold, then swipe the app card away), then reopen it. If it persists, delete and reinstall the app. Test in a different app to confirm.
  8. Reset all settings. This doesn’t delete your data, but it resets Wi-Fi passwords, wallpaper, and accessibility settings. Go to Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings. Enter your passcode and confirm. Your iPhone will restart.
  9. Restore from a backup or set up as new. If the problem persists, connect your iPhone to a computer, put it in Recovery Mode (see Troubleshooting below), and choose “Update” first (this keeps your data). If that doesn’t help, choose “Restore” to wipe the phone and install a fresh copy of iOS. After restoring, set up as new (don’t restore a backup) to test if the issue is software-related. If the screen works perfectly as a new phone, the problem was in your backup or a specific app.
  10. Check for physical damage. Inspect the screen for cracks, chips, or discoloration. Look at the edges of the phone for dents or signs of impact. If you see any damage, or if the phone has been dropped or exposed to water, it’s almost certainly a hardware problem.
  11. Run Apple’s built-in diagnostics (if available). Go to apple.com/support and use the “Get Support” chat or call Apple Support. They can run a remote diagnostic test on your iPhone to check the touchscreen hardware.
  12. Visit an Apple Store or authorized service provider. If all software steps fail, the issue is hardware. Book an appointment at a Genius Bar or an authorized repair center. They’ll run their own diagnostics and can replace the screen or other components.

Common Mistakes

  • Skipping the restart. Many touch issues are fixed by a simple restart, but people often jump straight to a restore.
  • Assuming a cracked screen always means hardware failure. A cracked screen can still be a software issue if the digitizer is intact, but it’s rare. Still, test after cleaning and restarting.
  • Ignoring water exposure. Even if the phone dried out, water damage can cause intermittent touch problems that appear days later.
  • Restoring from a backup too quickly. If you restore from a backup that contains a corrupted setting, the problem will come back. Always test as a new phone first.
  • Using third-party repair services. They may use non-genuine parts that cause new touch issues. Stick to Apple or authorized providers.

Tips

  • Keep a microfiber cloth handy and clean your screen regularly, especially after eating or using hand lotion.
  • Remove screen protectors that are old or have air bubbles; they can interfere with touch sensitivity.
  • If you use a magnetic car mount, consider moving the plate to the bottom of the phone or using a non-magnetic mount.
  • Enable “Touch Accommodations” in Settings > Accessibility > Touch if you have minor sensitivity issues, but this is a workaround, not a fix.
  • Always keep your iPhone updated to the latest iOS to avoid known touch bugs.

Troubleshooting

If the force restart doesn’t work: Make sure you’re pressing the buttons in the correct sequence and holding the final button long enough (about 10 seconds). If the Apple logo doesn’t appear, your battery may be completely dead—plug it in and wait 10 minutes, then try again.

If you can’t enter Recovery Mode: On iPhone 8 or later, press and release Volume Up, press and release Volume Down, then press and hold the Side button until the recovery mode screen appears. On iPhone 7, hold the Side and Volume Down buttons. On iPhone 6s, hold the Home and Top buttons. If you see the “Connect to Computer” screen, you’re in Recovery Mode. If not, try again with a different cable or USB port.

If the screen works in some areas but not others: This is a classic hardware symptom (often a broken digitizer). Try rotating the phone to see if the dead zone moves—if it stays in the same physical spot, it’s hardware.

If the problem only happens when charging: Use a different charger and cable. Non-Apple chargers can cause electrical interference. Also, check the Lightning port for lint with a toothpick (gently).

If the problem happens only in cold weather: iPhones have an operating temperature range. If it’s below 32°F (0°C), the screen may become less responsive. Warm the phone up gradually.

Frequently Asked Questions

Q: My screen is cracked but still works. Is it a hardware problem?
A: Not necessarily. A cracked glass layer can still have a functioning digitizer. If the touch works fine after cleaning and restarting, it’s just cosmetic. But if there are dead zones or ghost touches, the digitizer is damaged and needs replacement.

Q: What are “ghost touches” and what do they mean?
A: Ghost touches are when the screen registers taps or swipes you didn’t make. This can be caused by a software bug, a bad screen protector, or hardware failure. If it persists after a restart and update, it’s likely hardware.

Q: Can a software update really fix a touchscreen problem?
A: Yes. Apple has released iOS updates that specifically address touch responsiveness and ghost touch issues. Always update to the latest version before assuming hardware failure.

Q: How much does it cost to replace an iPhone screen?
A: Prices vary by model and whether you use Apple or a third party. Apple’s out-of-warranty screen repair typically ranges from $129 to $329 depending on the model. Check Apple’s support site for current pricing.

Q: My iPhone is still under warranty. Will they fix a touchscreen problem for free?
A: If the issue is a manufacturing defect and there’s no physical damage or water damage, yes. Apple’s limited warranty covers hardware defects for one year from purchase. But if there’s any sign of accidental damage, it won’t be covered.

Q: Is there a way to test the touchscreen hardware myself?
A: You can use the built-in “Touch” diagnostic by calling Apple Support, but there’s no public self-test. Third-party apps can show touch points on the screen, but they can’t distinguish between software and hardware causes.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →