sodcalculator

10 Tech How-To

USB Drive or SSD Real Capacity Test Guide

Guide 10-46323 · Updated · Step by step

This guide shows you how to verify that a USB flash drive or SSD actually has the storage capacity printed on its label. You’ll learn a reliable method using free tools that write and read data across the entire drive, exposing any fake capacity that would otherwise cause data loss.

What You’ll Need

  • A computer (Windows, macOS, or Linux) with a free USB port or available drive bay
  • The USB drive or SSD you want to test
  • A free capacity-testing tool: H2testw (Windows), F3 (macOS/Linux), or ValiDrive (Windows, faster)
  • Time — testing a full drive can take hours depending on size and speed

Step-by-Step

  1. Back up any data on the drive. The test will erase everything on it.
  2. Insert the drive into your computer. For SSDs, use a direct SATA or NVMe connection if possible; USB adapters can slow the test but still work.
  3. Download and install your chosen tool:
    • Windows: Download H2testw (portable, no install) or ValiDrive.
    • macOS: Install F3 via Homebrew: brew install f3
    • Linux: Install f3 from your package manager (e.g., sudo apt install f3).
  4. Format the drive to a single partition with a standard filesystem (FAT32, exFAT, or NTFS). This ensures the tool can access the full capacity.
  5. Run the test:
    • H2testw: Select the drive letter, choose “Write + Verify”, set the size to the full capacity (or leave as “all available space”), and click “Write + Verify”.
    • F3: Mount the drive, then run f3write /Volumes/YourDrive (macOS) or f3write /media/YourDrive (Linux). After it finishes, run f3read with the same path.
    • ValiDrive: Select the drive, click “Start Test”. It quickly checks random sectors rather than a full write.
  6. Wait for completion. A 64GB drive may take 1–3 hours on USB 3.0, longer on USB 2.0. Do not disconnect the drive during the test.
  7. Read the results. The tool will report the actual usable capacity and any errors. If the reported capacity is significantly lower than advertised (e.g., a “128GB” drive shows 64GB), the drive is counterfeit.
  8. If the test passes (no errors, full capacity), your drive is genuine. If it fails, stop using the drive immediately — it will corrupt files.

Common Mistakes

  • Testing a drive that still has data: The test overwrites everything, so back up first.
  • Using the wrong drive letter/path: Double-check you’re testing the target drive, not your system drive.
  • Interrupting the test: Unplugging mid-test can corrupt the drive and give false results.
  • Ignoring the “actual capacity” line: Some tools show a separate “data capacity” that may be less than the advertised size due to formatting overhead — that’s normal, but a huge difference (like half) is not.
  • Testing only a small portion: Some fake drives have a small real partition and a large fake area; you must test the full capacity.

Tips

  • Use a USB 3.0 port for faster testing; USB 2.0 will take much longer.
  • For SSDs, connect directly to the motherboard if possible, avoiding USB adapters that may throttle speed.
  • Check the drive’s temperature during the test — if it gets very hot, let it cool down to avoid thermal throttling.
  • Run a second test if the first shows borderline results (e.g., a few bad sectors).
  • Keep the tool’s log file as proof if you need to return the drive.

Troubleshooting

  • Tool doesn’t recognize the drive: Try a different USB port, re-format the drive, or use a different tool (e.g., H2testw vs. ValiDrive).
  • Test fails with “write error” early on: The drive may be failing physically or the filesystem is corrupted. Try formatting again and running a quick test.
  • Test takes much longer than expected: This is normal for large drives on USB 2.0. Check the tool’s progress indicator; if it’s stuck for hours, the drive may be fake and stuck in a loop.
  • Results show a capacity that is slightly less than advertised: That’s normal due to decimal vs. binary units (e.g., 64GB = 59.6GiB). A difference of a few percent is fine; a difference of 50% is not.
  • Drive becomes unresponsive during test: Unplug it, reconnect, and try again. If it repeatedly fails, the drive is likely defective or counterfeit.

Frequently Asked Questions

Why do fake drives exist?

Scammers modify the drive’s controller firmware to report a larger capacity than the actual flash memory. When you copy files beyond the real capacity, they are silently corrupted or lost.

How long does a capacity test take?

For a 64GB USB 3.0 drive, H2testw typically takes 1–2 hours. A 1TB SSD on a direct SATA connection might take 3–6 hours. ValiDrive is faster but less thorough.

Can I test a drive that already has data on it?

No — the test writes over the entire drive. Back up your data first.

What is the difference between GB and GiB?

GB (gigabyte) = 1,000,000,000 bytes; GiB (gibibyte) = 1,073,741,824 bytes. Drive manufacturers use GB, so a 64GB drive will show as 59.6GiB in Windows. That’s normal.

Is there a way to test without erasing the drive?

ValiDrive can test without erasing, but it only checks random sectors, not the whole drive. For a full verification, you must erase.

What should I do if my drive fails the test?

Stop using it immediately. If it’s new, return it for a refund. If it’s old, it may just be worn out — replace it.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →