This guide shows you how to stop your iPhone or Android phone from automatically joining Wi-Fi networks, which can help you avoid unwanted connections, save battery, and control your data usage. You’ll learn the exact steps for both platforms, including how to disable auto-join for specific networks and how to turn off the feature entirely. No prior technical knowledge is needed—just follow the steps for your device.
What You’ll Need
- Your iPhone (iOS 13 or later) or Android phone (Android 10 or later)
- Access to the Settings app on your device
- If you want to disable auto-join for a specific saved network, you’ll need to know the network name (SSID)
Step-by-Step
iPhone (iOS 13 and later)
- Open the Settings app on your iPhone.
- Tap Wi-Fi (the toggle should be green if Wi-Fi is on).
- Under MY NETWORKS, you’ll see a list of saved networks. Find the network you want to stop auto-joining.
- Tap the info (i) icon next to the network name.
- Toggle off Auto-Join. The switch will turn gray.
- If you want to disable auto-join for all networks, you can’t do it globally on an iPhone—you must repeat steps 3–5 for each saved network. Alternatively, you can turn off Wi-Fi entirely from Control Center (swipe down from the top-right corner and tap the Wi-Fi icon), but that also disconnects you from the current network and disables Wi-Fi until you re-enable it.
Android (Stock Android 10 and later, Samsung One UI, etc.)
- Open the Settings app on your Android phone.
- Tap Network & internet (or Connections on Samsung devices).
- Tap Wi-Fi.
- Make sure Wi-Fi is on (the toggle at the top).
- Tap the gear icon next to the network you want to change (or tap the network name and then the gear icon).
- Look for Auto-join or Auto reconnect. On stock Android, it’s a toggle labeled Auto-join. On Samsung, it may be under Advanced or a separate toggle labeled Auto reconnect.
- Toggle it off. The network will no longer be joined automatically.
- To disable auto-join for all networks on Android, you can go to Wi-Fi preferences (usually found in the Wi-Fi settings menu, often via the three-dot menu at the top-right or a “Wi-Fi preferences” link). Look for Turn on Wi-Fi automatically (or Auto-join networks) and toggle it off. This prevents your phone from automatically joining any saved network when Wi-Fi is turned on.
Common Mistakes
- Turning off Wi-Fi entirely instead of just auto-join: This disconnects you from the current network and may not be what you want if you only want to stop joining new networks.
- Forgetting that iPhone requires per-network changes: Unlike Android, iOS doesn’t have a global “auto-join off” switch. You must disable it for each saved network.
- Not checking “Ask to Join Networks” on iPhone: If you don’t want to join new networks automatically but still want to see available ones, you can set “Ask to Join Networks” to “Ask” or “Off” in Wi-Fi settings. This is separate from Auto-Join.
- On Android, confusing “Auto-join” with “Auto-connect”: Some devices use “Auto-connect” to mean the same thing, but others use it for a different feature. Always check the toggle’s description.
Tips
- If you’re trying to save battery, disabling auto-join can help because your phone won’t constantly scan for and connect to networks.
- For public Wi-Fi networks, consider using a VPN if you do join them, but that’s beyond the scope of this guide.
- On iPhone, you can also “Forget This Network” if you never want to see it again—this removes the saved password and auto-join entirely.
- On Android, if you have a network that you rarely use but don’t want to forget, disable auto-join and manually connect when needed.
- Remember that disabling auto-join does not affect your current connection—you’ll stay connected until you leave the network or disconnect manually.
Troubleshooting
If you’ve followed the steps but your phone still connects automatically, try these:
- Restart your phone: Sometimes settings don’t apply until a reboot.
- Check for a second saved entry: You might have the same network saved twice (e.g., once as “Home” and once as “Home_5G”). Disable auto-join on both.
- On iPhone, verify the Auto-Join toggle is actually off: Go back to the network info and confirm it’s gray.
- On Android, check if “Open network notification” or “Network notification” is on: This may prompt you to join, but it shouldn’t auto-join. If it does, it might be a bug—try toggling it off and on.
- Check if your carrier or a VPN app is overriding the setting: Some apps have their own Wi-Fi management. Temporarily disable them to test.
- If all else fails, forget the network and re-add it: This resets all settings for that network. You’ll need to re-enter the password.
Frequently Asked Questions
Will turning off auto-join affect my current Wi-Fi connection?
No. It only prevents future automatic connections. You’ll stay connected to the network you’re currently on until you disconnect or leave its range.
Can I turn off auto-join for all networks at once on iPhone?
No. iOS doesn’t have a global setting. You must disable Auto-Join for each saved network individually. Alternatively, you can turn off Wi-Fi entirely, but that disconnects you from everything.
Why does my Android phone keep reconnecting to a network I disabled auto-join for?
This can happen if the network is also saved in your Google account’s Wi-Fi backup, or if the network is an open network that your phone automatically joins. Check your Wi-Fi preferences for “Open network notification” and disable it, or remove the network from your saved list.
Does disabling auto-join save battery?
Yes, it can. Your phone won’t constantly scan for and connect to networks, which reduces power consumption. However, the effect is usually small unless you’re in an area with many Wi-Fi networks.
If I disable auto-join, can I still manually join the network?
Absolutely. You can go to Wi-Fi settings, tap the network name, and connect manually. You’ll still have the password saved.
What’s the difference between “Auto-Join” and “Ask to Join Networks” on iPhone?
Auto-Join automatically connects to a saved network without asking. “Ask to Join Networks” prompts you to join a new network when no saved network is available. You can set it to “Ask” or “Off.”
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Slow Internet Lag on Samsung Galaxy Note
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step