Burst mode on the iPhone camera fires off a rapid sequence of photos while you hold the shutter button, which is great for action shots but can fill your camera roll with dozens of near-identical images. If you’d rather take single shots, you can disable burst mode in iOS 10 and iOS 11 by changing a simple setting. This guide walks you through the exact steps, plus what to do if the setting doesn’t behave as expected.
What You’ll Need
- An iPhone, iPad, or iPod touch running iOS 10 or iOS 11
- Access to the Settings app (no special permissions required)
Step-by-Step
- Unlock your device and go to the Settings app (the gray gear icon).
- Scroll down and tap Photos & Camera. In iOS 11, this section is simply labeled Camera. (If you see “Photos & Camera,” use that; if not, tap “Camera.”)
- Look for the section labeled Camera (or Camera Settings).
- Find the switch labeled Use Burst Mode (in iOS 10) or Burst Mode (in iOS 11).
- Tap the switch to turn it off. When the switch is gray (not green), burst mode is disabled.
- Exit Settings. Your camera app will now take a single photo each time you press and hold the shutter button.
Common Mistakes
- Looking in the wrong Settings section: In iOS 10, the setting is under Photos & Camera, not just Camera. In iOS 11, it’s under Camera. If you can’t find it, double-check the section name.
- Turning off the wrong switch: Make sure you’re toggling Use Burst Mode or Burst Mode, not HDR Auto or Live Photo.
- Forgetting to close the Settings app: The camera app reads the setting when it opens. If you leave Settings open and switch to the camera, the change may not take effect until you fully close and reopen the camera app.
- Holding the shutter too long: Even with burst mode off, holding the shutter button may still take a burst on some iOS versions (especially iOS 11). To take a single photo, tap the shutter button once and release immediately.
Tips
- If you only occasionally want burst mode, leave it on and just tap the shutter quickly for single shots—you’ll get one photo. Burst only activates when you press and hold.
- On iPhone 7 and later, the camera app also has a burst feature when you press and hold the volume up button. Turning off the setting in Settings does not disable that; to avoid accidental bursts, use the on-screen shutter button instead.
- If you’ve already taken a burst, you can go to the Photos app, select the burst, and tap Select to keep only the best shots and delete the rest.
- After turning off burst mode, test it by opening the camera and holding the shutter button for a second. You should see only one photo captured.
Troubleshooting
If the setting doesn’t seem to work, try these steps:
- Restart the Camera app: Double-press the Home button (or swipe up from the bottom on iPhone X and later) to open the app switcher, then swipe the Camera app away. Reopen it and test again.
- Restart your iPhone: Press and hold the power button until the slider appears, then slide to power off. Turn it back on and check the setting.
- Check for iOS updates: Go to Settings > General > Software Update. If an update is available, install it—this can fix glitches where settings don’t stick.
- Reset all settings: If nothing else works, go to Settings > General > Reset > Reset All Settings. This won’t delete your photos or data, but it will reset preferences like Wi-Fi passwords and wallpaper. You’ll need to re-enter Wi-Fi passwords afterward.
- If the switch is grayed out: This can happen if a restriction is enabled. Go to Settings > General > Restrictions (or Screen Time in iOS 12+). Enter your passcode, scroll to Allowed Apps, and make sure Camera is toggled on. If it’s off, turn it on.
Frequently Asked Questions
Will turning off burst mode affect my ability to take Live Photos?
No. Burst mode and Live Photos are separate features. You can still take Live Photos with burst mode turned off—just tap the Live Photo icon (the concentric circles) in the camera app.
Does burst mode use more storage?
Yes, because it captures many photos in a short time. Each photo is a separate file, so a burst can quickly fill storage. Turning it off helps conserve space.
Can I still take burst photos after turning it off?
No, the setting disables the burst feature entirely. To take a burst again, go back to Settings and turn the switch back on.
Why does my iPhone still take multiple photos when I hold the shutter?
In iOS 11, holding the shutter button may still trigger a burst even with the setting off, especially on older devices. To avoid it, tap the shutter button quickly instead of holding it.
Does this setting sync across devices?
No, it’s per-device. If you have multiple iPhones or iPads, you’ll need to change the setting on each one.
Will turning off burst mode affect the camera’s performance?
No, it only changes what happens when you press and hold the shutter button. Single shots will be unaffected.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step
- Stop Outlook From Changing Hyperlink Font
- Hiberfil.sys: What It Is & How to Delete It
- How to Make a Mask on Snapchat: Step-by-Step