Typing numbers on an iPhone often means tapping the “123” key, finding the number, then tapping the “ABC” key to return to letters. This guide shows you how to keep the number row visible on the standard iPhone keyboard, so you can type digits and letters without constantly switching modes. This works on all current iPhone models running iOS 16 or later.
What You’ll Need
- An iPhone with iOS 16 or later installed
- The built-in Apple keyboard (the standard keyboard that comes with the phone)
- Any app that uses the keyboard, such as Messages, Notes, or Safari
Step-by-Step
- Open any app that brings up the keyboard. For example, open the Messages app and tap on a conversation, or open Notes and start a new note. The standard keyboard will appear at the bottom of the screen.
- Tap the “123” key. This is located in the bottom-left corner of the keyboard, just above the “ABC” key. Tapping it switches the keyboard from letters to numbers and symbols.
- Look for the number row. On the number and symbol layout, you will see a row of numbers (1 through 0) at the top of the keyboard, directly above the QWERTY rows. This row is always visible when you are in the number/symbol mode.
- Type the number you need. Tap any number in that top row. It will appear in the text field.
- Switch back to letters. To return to the letter keyboard, tap the “ABC” key in the bottom-left corner. This is the same key that was “123” a moment ago.
- Repeat as needed. For each number you need to type, you will have to tap “123,” type the number, then tap “ABC” to go back to letters. This is the standard behavior of the iPhone keyboard.
If you want to type a single number and automatically return to the letters keyboard, there is a faster method:
- Hold the “123” key. Press and hold the “123” key with your finger.
- Slide your finger to the number. While still holding, slide your finger up to the number you want in the number row that appears.
- Release your finger. The number will be typed, and the keyboard will automatically switch back to the letters layout. This saves you from tapping “ABC” each time.
This hold-and-slide trick works for symbols too. If you hold “123” and slide to a symbol like “#” or “@”, it will insert the symbol and return to letters.
Common Mistakes
- Tapping instead of sliding: The most common mistake is tapping the “123” key, typing the number, and then forgetting to tap “ABC” to return to letters. This results in typing letters when you think you are typing numbers. Always check the keyboard layout before you type.
- Looking for a permanent number row: Some users expect the number row to be visible at all times, like on a computer keyboard. The standard iPhone keyboard does not have a permanent number row. The numbers only appear when you are in the number/symbol mode.
- Using the wrong key: The “123” key is in the bottom-left corner. Some users accidentally tap the globe icon (if they have multiple keyboards enabled) or the microphone icon instead. Make sure you are tapping the key labeled “123.”
- Releasing too early with the hold method: When using the hold-and-slide method, if you release your finger before sliding to a number, the keyboard will switch to the number layout and stay there. You then have to tap “ABC” to go back.
Tips
- Use the hold-and-slide method for single digits: This is the fastest way to type one number without disrupting your typing flow. It is especially useful for typing things like addresses or phone numbers.
- Type numbers in a sequence: If you need to type several numbers in a row, tap “123” once and type them all. Only switch back to letters when you are done with the numbers.
- Use the period and comma shortcuts: On the letter keyboard, you can quickly type a period by double-tapping the space bar. This does not work for numbers, but it is a handy trick for punctuation.
- Consider third-party keyboards: If you find the standard keyboard’s number switching too tedious, you can install a third-party keyboard from the App Store, such as Gboard or SwiftKey. These often have a permanent number row or a more convenient number layout. However, they require granting full access to your keyboard input, so weigh the privacy trade-offs.
- Use the numbers on the top row of the symbol layout: When you tap “123,” the numbers 1 through 0 appear in the top row. The second row has symbols like @, #, and $. The third row has punctuation. Make sure you are looking at the correct row for the character you need.
Troubleshooting
- The number row is not visible: If you tap “123” and do not see a row of numbers at the top, you may be using a different keyboard layout. For example, if you have a non-English keyboard enabled, the layout may differ. Check your keyboard settings by going to Settings > General > Keyboard > Keyboards. Make sure the English (or your preferred language) keyboard is enabled.
- The keyboard switches back to letters on its own: This can happen if you accidentally tap the “ABC” key or if you are using the hold-and-slide method and release too early. Try again, making sure you slide your finger to the number before releasing.
- The hold-and-slide method is not working: If you press and hold “123” and nothing happens, you may have a setting that disables this gesture. Go to Settings > General > Keyboard and make sure “Enable Key Flicks” is turned on. If it is already on, try restarting your iPhone.
- Numbers are typing as letters: This usually means you are not actually in the number mode. Look at the bottom-left key: if it says “123,” you are in letter mode. If it says “ABC,” you are in number mode. Tap the key to switch.
- The keyboard is not the standard Apple keyboard: If you have installed a third-party keyboard and it is active, the steps above may not apply. Switch back to the Apple keyboard by tapping the globe icon until the standard keyboard appears.
Frequently Asked Questions
Can I make the number row always visible on the standard iPhone keyboard?
No, the standard Apple keyboard does not have an option to permanently show a number row. You must switch to the number layout using the “123” key. Third-party keyboards like Gboard offer this feature.
Why does the iPhone keyboard not have a number row?
Apple designed the keyboard to maximize the size of the letter keys. Adding a permanent number row would make the keys smaller and potentially harder to type on. The trade-off is that you must switch modes to access numbers.
How do I type a number and automatically return to letters?
Press and hold the “123” key, slide your finger to the number you want, and release. The number will be typed and the keyboard will automatically switch back to letters.
Is there a way to type numbers faster?
The fastest way for a single number is the hold-and-slide method. For multiple numbers, tap “123” once and type them all before switching back. Some users also find that using the dictation feature (the microphone icon) is faster for numbers in a sentence.
Do third-party keyboards have a permanent number row?
Yes, many third-party keyboards, such as Gboard and SwiftKey, offer a permanent number row as a setting. You can enable it in the keyboard’s settings after installation. Keep in mind that using a third-party keyboard requires granting it full access to your typing data.
Why does my keyboard sometimes show numbers without me pressing “123”?
This can happen if you have a hardware keyboard connected via Bluetooth, or if you are using a text field that is formatted for numbers, such as a phone number field. In those cases, the keyboard automatically switches to the number layout.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step
- Stop Outlook From Changing Hyperlink Font
- Hiberfil.sys: What It Is & How to Delete It
- How to Make a Mask on Snapchat: Step-by-Step