sodcalculator

10 Tech How-To

How to Undervolt a GPU: Step-by-Step Guide

Guide 10-56016 · Updated · Step by step

Undervolting your GPU lowers the voltage it receives while maintaining the same clock speeds, which reduces heat, fan noise, and power draw—often with zero performance loss. This guide walks you through the process using MSI Afterburner, the most common tool, and covers what to do if things go wrong.

What You’ll Need

  • A desktop or laptop with a discrete GPU (NVIDIA or AMD) that supports voltage control. Most modern cards do, but some laptops and low-power cards lock it.
  • MSI Afterburner (free) and its companion tool, Kombustor, or any GPU stress test like FurMark, Unigine Heaven, or 3DMark Time Spy.
  • GPU-Z (free) to monitor temperatures and clock speeds accurately.
  • At least 30 minutes of uninterrupted time—do not rush this.

Step-by-Step

  1. Download and install MSI Afterburner and GPU-Z. Install both, then restart your PC. Open GPU-Z and note your GPU’s default core clock, memory clock, and voltage (if shown). These are your baseline numbers.
  2. Open MSI Afterburner. You’ll see sliders for Core Voltage, Power Limit, Core Clock, and Memory Clock. Click the gear icon to open settings. Under the “General” tab, check “Unlock voltage control” and “Unlock voltage monitoring.” Apply and restart Afterburner.
  3. Set a baseline. Before changing anything, run a stress test for 10 minutes with Afterburner’s on-screen display (OSD) showing core clock, temperature, and voltage. Note the maximum core clock your GPU boosts to and the maximum temperature. This is your reference point.
  4. Open the curve editor. In Afterburner, press Ctrl+F. This opens the voltage/frequency curve—a graph with voltage on the X-axis and clock speed on the Y-axis. Each point on the curve tells the GPU what clock speed to run at a given voltage.
  5. Find your target voltage. Look at the curve to see what voltage corresponds to your GPU’s maximum boost clock (the number you noted in step 3). For example, if your GPU boosts to 1900 MHz at 1.05V, that’s your starting point. You’ll want to lower the voltage while keeping that same clock speed.
  6. Select the point at your target voltage. Click on the curve at that voltage. It will highlight. Now, hold Shift and drag that point upward until the clock speed matches your baseline maximum boost clock. This tells the GPU: “run this clock speed at this lower voltage.”
  7. Flatten the curve after that point. Everything to the right of your selected point (higher voltages) should be dragged down to the same clock speed. Select all points to the right (hold Shift and click the last one), then drag them down to match your target clock. This prevents the GPU from using higher voltages when boosting.
  8. Apply and test. Click the checkmark in Afterburner to apply the curve. Run your stress test again for 10 minutes. Watch for crashes, artifacts (visual glitches), or thermal throttling. If stable, note the new temperature and power draw—they should be lower.
  9. Push further (optional). If stable, repeat steps 6–8, selecting a slightly lower voltage point (e.g., 1.00V instead of 1.05V) and setting the same clock speed. Each time, test for stability. Stop when you hit a crash or instability, then revert to the last stable setting.
  10. Save your profile. Once stable, click the save icon (diskette) in Afterburner and assign it to a profile slot (1–5). Then, in settings, check “Apply overclocking at system startup” so your undervolt persists after reboot.

Common Mistakes

  • Undervolting too aggressively. Dropping voltage by 100mV or more in one step often causes crashes. Increments of 25–50mV are safer.
  • Forgetting to flatten the curve. If you only lower one point, the GPU may still boost to higher voltages under load, negating your work.
  • Skipping the baseline test. Without knowing your default boost clock and temperature, you can’t tell if the undervolt is working.
  • Not testing long enough. A 2-minute test may pass, but a 30-minute session can crash. Use at least 10 minutes per step.
  • Applying the curve to the wrong GPU. If you have an iGPU (integrated) and a dGPU (discrete), make sure Afterburner is controlling the discrete card.

Tips

  • Start with a modest target. A 50mV reduction is a safe first step. For example, if your card runs 1.05V, try 1.00V at the same clock.
  • Monitor with the OSD. Enable Afterburner’s on-screen display to see real-time voltage, clock, and temperature during stress tests—no need to alt-tab.
  • Use a consistent stress test. Stick to the same benchmark for all tests so comparisons are apples-to-apples.
  • Laptops benefit most. Undervolting a laptop GPU can drop temperatures by 10–15°C, reducing fan noise and extending battery life.
  • Keep a backup. Before changing anything, screenshot your original curve. If you mess up, you can restore it.
  • Power limit matters too. Lowering the power limit (e.g., to 90%) can further reduce heat with a small performance hit. Combine it with undervolting for maximum efficiency.

Troubleshooting

  • System crashes or black screens during test. Your undervolt is too aggressive. Reboot, open Afterburner (it should revert to default on crash), and raise the voltage by 25mV or lower the clock speed.
  • Artifacts (flickering, colored dots, tearing). This indicates instability. Revert to the last stable curve immediately. Artifacts can corrupt data if left running.
  • No temperature change. Check that your curve is actually applied—the OSD should show a lower voltage under load. Also, your GPU may be power-limited, not voltage-limited; try lowering the power limit instead.
  • Afterburner won’t apply the curve on startup. Make sure “Apply overclocking at system startup” is checked in settings. If Windows fast startup interferes, disable it in Windows power options.
  • Laptop undervolt seems locked. Some laptop BIOSes block voltage control. Check if your BIOS has an option to enable it, or use Intel XTU for Intel CPUs (but that’s CPU, not GPU). If locked, you can’t undervolt via Afterburner.
  • Game crashes but stress test passes. Games stress GPUs differently. Run a few games you play for 30 minutes each. If one crashes, lower the undervolt slightly.

Frequently Asked Questions

Does undervolting void my warranty?

No. Undervolting uses software settings and doesn’t physically modify the card. If you reset to defaults, there’s no trace. It’s generally considered safe and won’t void most warranties.

Will I lose performance?

Usually not. You’re keeping the same clock speed but at a lower voltage. In some cases, you may even gain performance if the card was thermal-throttling before. If you undervolt too much and lower the clock, you’ll lose a few percent.

How much power can I save?

Typical savings are 10–30 watts under load, depending on the card and how aggressive your undervolt is. At idle, savings are minimal. Laptops see the biggest relative gains.

Is undervolting safe for my GPU?

Yes. Lower voltage means less heat and less stress on components. It’s the opposite of overclocking. The only risk is instability (crashes), which is harmless and reversible.

Can I undervolt an AMD GPU the same way?

Yes, MSI Afterburner works with most AMD cards using the same curve editor. Alternatively, AMD’s own Adrenalin software has a similar voltage curve feature under Performance > Tuning.

Do I need to redo the undervolt after driver updates?

Sometimes. Driver updates can reset Afterburner’s settings or change the default curve. Check your profile after a driver update and reapply if needed. It usually takes less than a minute.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →