sodcalculator

10 Tech How-To

How to Unroot Samsung Galaxy Gio (GT-S5660)

Guide 10-46998 · Updated · Step by step

Unrooting your Samsung Galaxy Gio (GT-S5660) returns it to its original factory state, removing Superuser access and restoring the stock firmware. This is useful if you need warranty service, want to receive official OTA updates, or simply want a stable, unmodified Android experience. Before you start, back up any important data, as the process will wipe your phone completely.

What You’ll Need

  • A Windows PC (the tools below are Windows-only).
  • The original USB cable for your Galaxy Gio.
  • Odin3 (version 1.85 or 3.07 are known to work well with this device).
  • The official Samsung stock firmware for the Galaxy Gio (GT-S5660). This is a single .tar.md5 file. Search for “S5660XXKTI” or “S5660XWKT2” depending on your region.
  • Samsung USB drivers installed on your PC.
  • A fully charged battery (at least 80%) to avoid interruption during flashing.

Step-by-Step

  1. Enable USB Debugging: On your phone, go to Settings > Applications > Development and tick USB debugging. This allows Odin to communicate with the device.
  2. Power off the phone completely. Remove the battery, wait 5 seconds, then reinsert it. Do not turn the phone on.
  3. Enter Download Mode: Press and hold Volume Down + Home + Power buttons simultaneously. When the warning screen appears, press Volume Up to continue into Download Mode. You should see a green Android robot with a shovel icon.
  4. Extract Odin and the firmware: On your PC, unzip the Odin3 archive. Also extract the stock firmware zip file – you should end up with a file ending in .tar.md5 (or just .tar).
  5. Run Odin3 as Administrator: Right-click Odin3.exe and select Run as administrator to avoid driver permission issues.
  6. Connect your phone: Plug the Galaxy Gio into the PC via USB. In Odin, the ID:COM box (top left) should turn blue or yellow, and a message like Added!! will appear in the log. If it does not, reinstall the Samsung USB drivers and try another USB port.
  7. Configure Odin options: In the Options tab, ensure only Auto Reboot and F. Reset Time are checked. Do NOT check Re-Partition – this is critical, as checking it with the wrong PIT file can brick your phone.
  8. Load the firmware: Click the PDA button (or AP in newer Odin versions) and select the stock firmware .tar.md5 file you extracted. Do not touch the PHONE, CSC, or PIT buttons.
  9. Start the flash: Click the Start button. The process will take 2–5 minutes. You will see a progress bar in Odin and a blue progress bar on the phone.
  10. Wait for completion: When the phone reboots automatically and Odin shows PASS! in a green box (top left), the flash is successful. Unplug the phone.
  11. First boot: The first boot after flashing will take longer than usual (up to 5 minutes). Once it reaches the home screen, the phone is fully unrooted and running stock firmware.

Common Mistakes

  • Checking Re-Partition: This is the #1 cause of hard bricks on the Galaxy Gio. Only enable it if you are also flashing a PIT file, which is not needed for a simple unroot.
  • Using the wrong firmware: Flashing a firmware for a different model (e.g., GT-S5660V or a carrier-specific variant) can cause boot loops or network issues. Always download the exact GT-S5660 firmware for your region.
  • Interrupting the process: Pulling the USB cable or closing Odin mid-flash can leave the phone in a semi-bricked state. Be patient and do not touch anything until you see PASS!.
  • Forgetting to back up: This process wipes all user data. If you skip the backup, you will lose photos, contacts, and app data permanently.
  • Using a low-quality USB cable: Charge-only cables will not carry data. Use the original Samsung cable or a known good data cable.

Tips

  • If you are unsure about the firmware version, check your current baseband version under Settings > About phone before flashing. Match the new firmware’s region code (e.g., XX = Europe, XW = Europe unbranded) to your current one.
  • Run Odin in a Windows environment without antivirus interference. Some antivirus programs flag Odin as a false positive; temporarily disable them during the flash.
  • After unrooting, perform a factory reset from Settings > Privacy > Factory data reset to clear any leftover root-related files and ensure a clean system.
  • Keep the stock firmware file saved on your PC. You can use it again later if you ever need to restore the phone.
  • If you plan to root again in the future, note that the stock firmware will remove root, so you will need to re-root using the same method you originally used.

Troubleshooting

  • Odin does not recognize the phone: Reinstall Samsung USB drivers, try a different USB port (preferably USB 2.0), and ensure USB debugging was enabled before powering off. Also, try running Odin as administrator.
  • Odin gets stuck at “SetupConnection”: This usually means the driver is not installed correctly. Uninstall the current driver, reboot the PC, and reinstall the Samsung driver. Also, close Kies if it is running in the background.
  • Flash fails with “FAIL!” and a red box: The firmware file may be corrupt. Re-download the .tar.md5 file and verify its size (should be around 200–300 MB). Also, try a different Odin version.
  • Phone is stuck in a boot loop after flashing: This often happens if you flashed the wrong firmware. Re-enter Download Mode (Volume Down + Home + Power) and flash the correct firmware. If it still loops, do a factory reset from recovery mode (Volume Up + Home + Power).
  • Phone is completely dead (no response to any button): This is a hard brick. Try removing the battery, waiting 30 seconds, and reinserting it. Then attempt to enter Download Mode again. If it still does not respond, you may need a USB jig or JTAG service, which is beyond the scope of this guide.
  • Superuser app is still present after flashing: The stock firmware should remove it. If it persists, you likely flashed a custom ROM, not the official stock firmware. Double-check the file you flashed.

Frequently Asked Questions

Will unrooting void my warranty?
Yes, rooting voids the warranty. Unrooting by flashing stock firmware restores the software to its original state, which typically brings the warranty back, provided there is no physical damage.

Do I need to unroot before receiving OTA updates?
Yes. OTA updates often fail on rooted devices because the system partition has been modified. Unrooting restores the stock recovery and system, allowing updates to install normally.

Will this erase my apps and photos?
Yes, flashing stock firmware performs a full wipe. Back up your data before starting. After flashing, you will need to reinstall apps and restore your files.

Can I unroot without a PC?
If you have a custom recovery like ClockworkMod installed, you could flash a stock ROM from a zip file on the SD card. However, the most reliable and common method is using Odin on a PC.

Is it safe to unroot the Galaxy Gio?
Yes, if you follow the steps correctly and use the correct firmware, it is safe. The risk of bricking is low, but it increases if you ignore warnings about Re-Partition or use a wrong firmware file.

How long does the whole process take?
From downloading the firmware to finishing the first boot, it typically takes 15–30 minutes. The actual flashing process takes only 2–5 minutes.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →