sodcalculator

10 Tech How-To

Unroot Samsung Galaxy Note 4 Australia: Safe Guide

Guide 10-57938 · Updated · Step by step

This guide walks you through unrooting your Samsung Galaxy Note 4 (SM-N910F or Australian variants) to restore full warranty eligibility and receive OTA (over-the-air) updates again. You will need a Windows PC, the original USB cable, and about 20 minutes. The process involves flashing stock firmware via Odin, which removes root and reinstalls the official system.

What You’ll Need

  • Windows PC (Windows 7/8/10/11)
  • Original Samsung USB cable (or a high-quality data cable)
  • Odin3 (v3.13.1 or newer) – download from a trusted source
  • Stock firmware for your exact model (e.g., SM-N910F for Australia) – get from SamMobile or Updato
  • Samsung USB drivers installed on your PC
  • Backup of your personal data (photos, contacts, etc.) – unrooting wipes the phone

Step-by-Step

  1. Back up everything. Unrooting with Odin performs a factory reset, so copy all photos, videos, contacts, and app data to your PC or cloud.
  2. Enable USB debugging and OEM unlock. Go to Settings → About phone, tap “Build number” 7 times to unlock Developer Options. Then in Settings → Developer options, enable “USB debugging” and “OEM unlock” (if present).
  3. Download and extract firmware. Download the stock firmware for your exact model (check in Settings → About phone → Model number). Extract the ZIP – you should get a file ending in .tar.md5.
  4. Install Odin and drivers. Extract Odin3 to a folder on your PC. Install Samsung USB drivers if you haven’t already.
  5. Power off the phone. Turn off your Galaxy Note 4 completely.
  6. Boot into Download Mode. Press and hold Volume Down + Home + Power simultaneously. When the warning screen appears, press Volume Up to continue.
  7. Connect the phone to PC. Plug the USB cable into the phone and PC. Odin should show a blue or yellow box in the “ID:COM” section, indicating the device is detected.
  8. Load firmware in Odin. In Odin, click the “AP” button (or “PDA” in older versions) and select the .tar.md5 file you extracted. Do not touch any other options – leave “Auto Reboot” and “F. Reset Time” checked.
  9. Start flashing. Click the “Start” button. Wait 5–10 minutes until you see a green “PASS!” message in the top-left box. The phone will reboot automatically.
  10. Verify unroot. Once the phone boots (first boot takes longer), go to Settings → About phone and check that “Device status” says “Official”. Also, check if the SuperSU or Magisk app is gone. If you want to be certain, install a root checker app from the Play Store – it should say “Root access is not properly installed”.

Common Mistakes

  • Using the wrong firmware. Flashing firmware for a different model (e.g., SM-N910G instead of SM-N910F) can brick your phone. Always verify your exact model number.
  • Not installing Samsung USB drivers. Odin won’t detect the phone without proper drivers, causing “device not recognized” errors.
  • Interrupting the flash. Unplugging the cable or closing Odin during flashing can permanently damage the phone. Let it finish.
  • Leaving “Re-Partition” checked. This option is only for specific files and can cause a hard brick if used incorrectly. Ensure it is unchecked.
  • Not backing up. Forgetting to backup means losing all your data – the process wipes the internal storage.

Tips

  • Use a PC with a native USB port (not a hub) to avoid connection drops.
  • Close all other programs on your PC during flashing to prevent interruptions.
  • If the phone gets stuck in a boot loop after flashing, boot into Recovery Mode (Volume Up + Home + Power) and do a factory reset from there.
  • Keep the phone charged above 50% before starting – a low battery can cause a failed flash.
  • After unrooting, you may need to re-register the device with Samsung for OTA updates – this happens automatically when you connect to Wi-Fi.

Troubleshooting

Odin doesn’t detect the phone. Reinstall the USB drivers, try a different USB port, or replace the cable. Also, ensure the phone is in Download Mode (not just connected normally).

Flash fails with “FAIL!” message. This usually means the firmware file is corrupted or the wrong model. Re-download the firmware and verify the model number. Also, check that Odin is run as administrator (right-click → Run as administrator).

Phone stuck on Samsung logo after flash. This is a boot loop. Boot into Recovery Mode (Volume Up + Home + Power) and select “Wipe data/factory reset”. Then reboot.

Device status still says “Custom”. This can happen if the flash didn’t fully overwrite the system. Try re-flashing the firmware, ensuring you use the correct AP file. If it persists, you may need to flash the full firmware package (including BL, CP, CSC) – but only if you’re comfortable with Odin.

OTA updates still fail. After unrooting, go to Settings → About phone → Software update and check for updates. If it fails, clear the Google Play Services cache or perform a factory reset from Recovery Mode.

Frequently Asked Questions

Will unrooting void my warranty? No, unrooting restores the original software, so the phone is back to factory state. However, if the bootloader was unlocked (via OEM unlock), that may still be flagged – but for most Australian Note 4 units, this is not an issue.

Do I need to unroot before selling the phone? Yes, it’s strongly recommended. A rooted phone is a security risk for the next owner, and they may have trouble receiving updates.

Can I unroot without a PC? If you used SuperSU, you can use the “Full unroot” option in the app, which restores the stock boot image. However, this doesn’t always return the system to fully stock, and it’s safer to use Odin.

Will unrooting delete my apps? Yes, the process wipes all data, including apps, photos, and settings. Back up everything first.

What if I have a custom recovery like TWRP? Unrooting with Odin will replace the custom recovery with the stock one, so that’s covered.

Is it safe to unroot? Yes, if you follow the steps carefully. The risk of bricking is low, but it exists if you use wrong firmware or interrupt the flash.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →