If you rooted your Samsung Galaxy Note 4 (Canadian model SM-N910W8) and now need to unroot it for warranty service, OTA updates, or just to return to stock, this guide walks you through the process safely. Unrooting removes root access and restores the original Samsung firmware, so you can use your phone normally again. Before starting, back up all important data, because the process will wipe your device.
What You’ll Need
- A Windows PC (or a Mac with Odin alternatives, but Windows is easiest)
- USB cable compatible with your Note 4
- Odin3 software (version 3.10.6 or newer) – download from a trusted source
- The official stock firmware for your specific Canadian carrier (e.g., Rogers, Bell, Telus) – get it from a reputable firmware repository like SamMobile or Updato
- Samsung USB drivers installed on your PC
- Your phone’s battery charged to at least 50%
Step-by-Step
- Back up your phone. Use Samsung Smart Switch or manually copy photos, contacts, and files to a computer or cloud. Unrooting will erase everything.
- Enable USB debugging and OEM unlock. On your phone, go to Settings > About Phone and tap “Build number” 7 times to unlock Developer Options. Then go to Settings > Developer Options and enable “USB debugging” and “OEM unlock” (if present).
- Download the correct firmware. Find the firmware for your exact model (SM-N910W8) and carrier. It will be a .tar.md5 file. Make sure it matches your region (e.g., XAC for Canada, or specific carrier codes like RWC for Rogers, BMC for Bell, TLS for Telus).
- Extract the firmware file. Use 7-Zip or WinRAR to extract the downloaded archive. You should get a .tar.md5 file (or multiple files like AP, BL, CP, CSC).
- Install Samsung USB drivers. If you haven’t already, install the drivers on your PC so Odin can detect your phone.
- Run Odin as administrator. Right-click Odin3.exe and select “Run as administrator”.
- Boot your phone into Download Mode. Turn off the phone. Then press and hold Volume Down + Home + Power simultaneously until a warning screen appears. Press Volume Up to continue into Download Mode.
- Connect your phone to the PC. Use a USB cable. In Odin, you should see a blue or yellow box in the “ID:COM” section indicating the phone is detected. If not, reinstall drivers or try a different USB port.
- Load the firmware into Odin. Click the “AP” button (or “PDA” in older versions) and select the .tar.md5 file you extracted. Do not touch the other slots (BL, CP, CSC) unless you have separate files – if your firmware came as separate files, load them into their respective slots.
- Disable “Auto Reboot” and “F. Reset Time”. In Odin’s Options tab, uncheck “Auto Reboot” and “F. Reset Time”. This prevents the phone from rebooting before the process is fully complete.
- Click “Start”. Odin will flash the stock firmware. This takes a few minutes. You’ll see a progress bar and a “PASS!” message when done.
- Manually reboot. After the PASS message, disconnect the USB cable, then press and hold Power + Home + Volume Down to reboot into Download Mode again (just to be safe), then immediately press Volume Up to boot normally. Alternatively, just hold Power to reboot.
- Wait for the first boot. The first boot after flashing can take up to 10 minutes. Be patient.
- Verify root is gone. Once booted, check for root by installing a root checker app from the Play Store, or simply look for the SuperSU or Magisk app – they should be gone.
Common Mistakes
- Using the wrong firmware. Flashing a firmware meant for a different model or region can brick your phone. Always double-check your model number (SM-N910W8) and carrier.
- Not backing up. Skipping the backup and losing photos or documents is a common regret.
- Interrupting the flash. Unplugging the USB cable or letting the phone run out of battery during flashing can cause a hard brick.
- Forgetting to enable OEM unlock. On some Canadian Note 4 units, if OEM unlock is not enabled, Odin may fail or the phone may not boot properly.
- Using a cheap or faulty USB cable. A bad cable can cause connection drops mid-flash.
Tips
- Use the original Samsung USB cable if possible – it’s more reliable.
- Close all other programs on your PC during flashing to avoid interference.
- If you’re on a Mac, consider using a Windows virtual machine or borrowing a Windows PC – Odin is Windows-only.
- After unrooting, your phone will be completely stock. You’ll need to re-setup your device and reinstall apps.
- If you plan to re-root later, note that the bootloader may remain unlocked, but you’ll need to reflash root files.
Troubleshooting
Odin doesn’t detect my phone. Reinstall Samsung USB drivers, try a different USB port (preferably USB 2.0), and ensure you’re in Download Mode. Also, try a different cable.
Odin fails with “FAIL!” or “Kernel panic”. This usually means the firmware file is corrupt or mismatched. Re-download the firmware and try again. Also, check that you loaded the file into the correct slot (AP).
Phone is stuck in a boot loop. If the phone keeps restarting, boot into Recovery Mode (Volume Up + Home + Power) and do a factory reset. If that doesn’t work, reflash the firmware with Odin, this time checking “Auto Reboot” and “F. Reset Time”.
Phone won’t turn on at all (hard brick). If the screen stays black after flashing, try to boot into Download Mode again. If that fails, you may need to use a JTAG or visit a service center – but this is rare if you followed the steps correctly.
Frequently Asked Questions
Will unrooting void my warranty? Unrooting restores the phone to stock, so it should be fine for warranty claims, but carriers may still detect that a bootloader was unlocked. It’s best to check with your carrier.
Do I need to unlock the bootloader to unroot? No, unrooting with Odin does not require unlocking the bootloader. In fact, flashing stock firmware will relock the bootloader if it was unlocked.
Will I lose my data? Yes, flashing stock firmware wipes your phone completely. Back up everything first.
Can I unroot without a PC? No, you need a PC to use Odin. There is no reliable way to unroot without a computer.
What if I have a custom recovery like TWRP? Flashing stock firmware with Odin will replace the custom recovery with the stock one, so that’s covered.
Will OTA updates work after unrooting? Yes, once you’re back to stock, OTA updates should work normally.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Stop Outlook From Changing Hyperlink Font
- Hiberfil.sys: What It Is & How to Delete It
- How to Make a Mask on Snapchat: Step-by-Step
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step